embio diagnostics AirBeld EOS Temperature and Humidity Device User Guide
- June 13, 2024
- embio diagnostics
Table of Contents
- Features and content
- Installation
- Connecting the device to your network
- Button Functionality
- Dashboard
- Safety and maintenance
- Limited liability
- About EMBIO Diagnostics, Ltd.
- Contact information
- Technical Support
- Technical Specifications
- CUSTOMERS SUPPORT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
embio diagnostics AirBeld EOS Temperature and Humidity Device
Features and content
- USB-C
- Multifunction button
Installation
Quick start guide / First time setup
Recommendation: The AirBELD Eos is intended for indoor use only. The recommended height for placing the device on a vertical or horizontal surface is between 80 cm and 140 cm for accurate measurements.
Step 1: Carefully unpack the device.
Step 2: Place the device on the desired surface.
Step 3: Plug the power adapter, and the power cable into the device.
Connect the provided USB-C cable to the device and to an electrical wall
socket. Do not use it if the cable is damaged.
Step 4: Once the device is powered on, follow the WiF1 provisioning
guide to connect the device to your network.
Step 5: Log in to your online dashboard from your PC, using the
credentials sent to your e-mail.
Connecting the device to your network
Step 1: Share your email for the Google Play Store with us at
support@embiodiagnostics.eu.
Step 2: An invitation for the AirBELD application will be sent to you in
this email by the Google Play Store.
Step 3: Follow the link on the invitation to download the application on
your phone.
Step 4: Launch the application and follow the on-screen guide to set up
the WIFI network. credentials on the AirBELD device.
Step 5: Congratulations, your device is now connected!
Button Functionality
The device is equipped with a multifunction button.
- long press (12sec) sleep — 1 push wake up.
- very long press (22sec) reset WiFi SSID and Password, device will reset.
Dashboard
Use the provided credentials to log-in to your dashboard. Select the device you want to view and the data refresh rate. The readings are streamed to your dashboard.
Safety and maintenance
AirBELD Eos is intended for indoor use only. Avoid direct exposure to sunlight for long periods. Avoid exposure to direct heat sources. For correct usage, make sure the detector is operating in the specified temperature range (see technical specifications). Exposure to high humidity might permanently alter the detector’s sensitivity or damage it. Do not disassemble. If the detector does not work as specified or you are in doubt, contact technical support. Use dry cloth to clean the device. This product is a radio transmitter and receiver.
Limited liability
Product in continuous development.
It is recommended to keep the device constantly activated. EMBIO Diagnostics Ltd. shall not be liable for damages related to failure or loss of data arising from incorrect operations and handling of the device.
About EMBIO Diagnostics, Ltd.
EMBIO Diagnostics is a rapidly growing biotech company that designs and develops innovative, portable, biosensor-based digital devices for rapid diagnostics.
Contact information
+357 22515175 Athalassas Avenue 8, 2018, Nicosia, Cyprus embiodiagnostics.eu
Technical Support
Technical Specifications
| PM Sensor | PM 1.0 /2.5/4.0/10 | 0.3-1.0; 0.3-2.5; 0.3-4; 0.3-10 um |
|---|---|---|
| Measurement range Accuracy | 0 – 1000 ug/m3 +/-10% | |
| Gas Sensors | ||
| CO2 | Measurement range Accuracy | 400 – 5000 ppm +/- (40ppm + 5% of Reading) |
| voe | Measurement range Accuracy | 0 – 500 Index Points |
<+/- 5% repeatability
NOx| Measurement range
Accuracy| 0 – 500 Index Points
<+/-10% repeatability
Environmental Sensors| Temperature| Measurement range Accuracy| -10-
50 °C 0.45 °C
Relative Humidity| Measurement range Accuracy| 20-80 %RH 4.5%
Connectivity| WiFi – 2.4GHz
Dimensions (WxlxH)| 110 x 100 x 30 mm
Power| USB-C: SVDC, 1A Battery (optional)
Operating Conditions| 10- 40 °C
Storage Conditions| -10- 50 °C
CUSTOMERS SUPPORT
Importer and Manufacturer: EMBIO Diagnostics Ltd
Athalassas Avenue 8B, 2018 Nicosia, Cyprus. Tel: +357 22 515175,
www.embiodiagnostics.eu,
info@embiodiagnostics.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>