UGREEN CD342 Nexode MagConnect 100W 2 In 1 GaN Desktop Charger User Manual
- June 13, 2024
- UGREEN
Table of Contents
- UGREEN CD342 Nexode MagConnect 100W 2 In 1 GaN Desktop Charger
- Product Information
- Product Usage Instructions
- Package Contents
- USB Wired Charging
- Magnetic Wireless Charging
- Power Distribution
- Troubleshooting
- Specifications
- EU Declaration of Conformity
- FCC Statement
- ISED Statement
- Warranty Information
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
UGREEN CD342 Nexode MagConnect 100W 2 In 1 GaN Desktop Charger
Product Information
Package Contents | CN: USB Wired Charging | AR: USB |
---|---|---|
Nexode MagConnect 100W 2-in-1 GaN Desktop Charger | Model: CD342 | P/N: 15169 |
User Manual |
Product Usage Instructions
- Connect the charger to a power source using the provided power cable.
- Place your Tablet, Phone, Laptop, or Earbuds on the wireless charging area to initiate charging.
- For Airpods, ensure they are properly placed on the wireless charging area for charging.
- Use the USB ports for single-port or two-port charging with power distribution options.
- Refer to the Troubleshooting section in the user manual if the charger or mobile phone gets hot during wireless charging.
- Disconnect the charger from the power supply once your phone is fully charged to prevent continuous heating.
- Refer to the specifications for detailed information on input and output power.
- For three-port charging, connect your devices to the respective ports.
- Follow the EU Declaration of Conformity and FCC Statement guidelines for compliance and operation.
Specifications
Product| Input| USB-C1/C2 Output| USB-A Output| Wireless Charger Output| Total
Output Power| Frequency Band| H-field Strength
---|---|---|---|---|---|---|---
Nexode MagConnect 100W 2-in-1 GaN Desktop Charger| 100-240V~ 50/60Hz 1.8A Max|
5.0V 3.0A/9.0V 3.0A/12.0V 3.0A/15.0V 3.0A/20.0V 5.0A/3.3-21.0V
5.0A 100.0W Max| 5.0V 3.0A/9.0V 2.0A/12.0V 1.5A/10.0V 2.25A 22.5W Max|
5.0W/7.5W/15.0W Max| 100.0W Max| 110 kHz-205 kHz (For EU/UK)| 38.5dBuA/m@3m
Troubleshooting
- Why do the charger and mobile phone get hot during wireless charging? This is a normal phenomenon, because there will be a certain magnetoelectric conversion loss during the wireless charging process, which will be converted into heat to make themobile phone and wireless charger slightly heated.
- What is important to note when charging? After the phone is fully charged, please disconnect the charger from the power supply in time to avoid continuous heating of the charger and mobile phone.
Notes
Do not place metal objects (such as coins or magnetic cards) on the wireless charging area to avoid abnormal charging.
EU Declaration of Conformity
Hereby, Ugreen Group Limited declares that the product is in compliance with
Directive 2014/53/EU & 2011/65/EU. Learn more about the EU Declaration of
Conformity is available at the following internet address:
https://www.ugreen.com/download/
Ugreen Group Limited Add: Ugreen Building, Longcheng Industrial Park,
Longguanxi Road, Longhua, Shenzhen, China EU REP: Ugreen Group GmbH Add:
Mannheimer Str. 13, 30880 Laatzen, Germany
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC NOTE : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
Package Contents
USB Wired Charging
Magnetic Wireless Charging
Tips
- The wireless charging function is only compatible with iPhones that support magnetic wireless charging and earbuds that support wireless charging.
- For wireless charging with a phone case, it is recommended to use the official MagSafe case or UGREEN’s magnetic phone case.
- Do not place metal objects (e.g. phone ring holder, mount metal plate) or magnetic cards on the wireless charging area to avoid abnormal charging.
Power Distribution
USB Port
USB Port + Wireless Charger
Troubleshooting
How to solve the abnormal wireless charging?
- Before use, please make sure that your mobile phone has both wireless charging and MagSafe magnetic functions.
- If you want to wirelessly charge your phone with a case on, please use Apple’s official MagSafe case or UGREEN’s MagSafe-compatible case.
- Once a metal foreign object is placed in the charging area, the charger will automatically detect and disconnect from the power supply. The product will resume charging after the metal foreign object is removed
Why do the charger and mobile phone get hot during wireless charging?
This is a normal phenomenon, because there will be a certain magnetoelectric
conversion loss during the wireless charging process, which will be converted
into heat to make the mobile phone and wireless charger slightly heated.
What is important to note when charging?
After the phone is fully charged, please disconnect the charger from the power
supply in time to avoid continuous heating of the charger and mobile phone.
Specifications
Notes
- Unplug the charger from the power socket if it will not be used for a long time.
- To ensure fast and safe charging, it is recommended to use a charging cable that matches the rated charging power of the device.
- Do not use the unapproved or incompatible power adapter and charging cable, it may cause fire, explosion, or other dangers.
- Keep the product away from your pacemakers or defibrillators implanted at least 20 cm.
- This product works with devices compatible with the specified charging protocol.
- Do not use a power supply that exceeds the specified voltage and current to power this product.
- Do not place this product near a heat source or use it in a high-temperature, humid, or strong magnetic environment.
- If the power supply or components are faulty, do not dismantle and repair it by yourself, please contact the UGREEN after-sales service for support.
EU Declaration of Conformity
Hereby, Ugreen Group Limited declares that the product is in compliance with
Directive 2014/53/EU & 2011/65/EU. Learn more about the EU Declaration of
Conformity is available at the following internet address:
https://www.ugreen.com/download/
Ugreen Group Limited
Add : Ugreen Building, Longcheng Industrial Park, Longguanxi Road,
Longhua, Shenzhen, China
EU REP: Ugreen Group GmbH
Add : Mannheimer Str. 13, 30880 Laatzen, Germany
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC NOTE : This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body
ISED Statement
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator & your body.
Declaration of Conformity
Hereby, Ugreen Group Limited declares that the product is in compliance with Directive UK Radio Equipment Regulations(SI 2017 No.1206)& The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No.3032). Learn more about the GB Declaration of Conformity is available at the following internet address: https://www.ugreen.com/download/
Ugreen Group Limited
Add : Ugreen Building, Longcheng Industrial Park, Longguanxi Road,
Longhua, Shenzhen, China
UK REP : Acumen Intemational Business Consultancy Limited
Add : 94 Ock Street, Abingdon, OX14 5DH, UK
Important WEEE Information
-
This symbol on the product(s) and / or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment
(WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge. Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. -
For professional users in the European Union
-
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.
-
For disposal in countries outside of the European Union
-
This symbol is only valid in the European Union (EU). If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.
Warranty Information
A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>