OTESS AB0388-A Bamboo Wireless Charger and Stand User Manual

OTESS AB0388-A Bamboo Wireless Charger and Stand

Product Information

The Bamboo Wireless Charger & Stand is a versatile charging device that allows you to charge your Qi-compatible devices wirelessly. It features a sleek and stylish design, with a built-in pen holder for added convenience. The charger is equipped with a Type-C input for fast and efficient charging.

Specifications:

• Type-C Input: 5V 2A, 9V 2A
• Wireless Output: 5V 2A, 9V 1.1A
• Rated Power: 10W
• Item No.: 25175 592172

Product Usage Instructions

1. Connect the included Type-C charger cable to the charging port of the wireless charger.
2. Place your Qi-compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned.
3. When the wireless charge is working correctly, a white indicator light will turn on.

Note: If your phone has a protective case, you may need to remove it for a successful connection when using the wireless charger.

Warnings:

• Do not place any metal objects between the charger and the
  mobile device during the charging process to avoid risk.

• Do not use mobile devices with a metal case.

• Keep the charger out of reach of children.

FCC Statement
This device complies with Part 15 of the FCC Rules. It does not cause harmful interference and accepts any interference received, including interference that may cause undesired operation. The device has been tested and found to comply with the limits for a Class B digital device, providing reasonable protection against harmful interference in a residential installation. To ensure safe operation, always follow the instructions and maintain a distanceof at least 20cm between the user and the product.

Please refer to the user manual for more detailed instructions and safety information.

Product Overview

1. Wireless charging area
2. TYPE-C Input
3. Indicator light
4. TYPE-C Charger cable
5. Pen Holder
6. 6 Manual

Specifications

• Type-c Input: 5V 2A，9V 2A
• Wireless Output: 5V 2A, 9V 1.1A,
• Rated Power: 10W
• Item No.:25175 592172

Operation:

1. Connect the cable to the charging port
2. Put your Qi-compatible device on top of the wireless charger, ensuring that it is face up and centrally positioned.
3. When the wireless charge is working correctly a white light wil l turn on.

Note: If your phone has a protective case you may need to remove it for a successful connection when using the wireless charger.

Warnings:

1. Do not expose this product to rain or damp conditions.
2. Prevent this ítem from falling as it could cause serious damage.
3. Do not dismantle, repair or modify this product by yourself, contact an authorized specialist.
4. In order to avoid any risk, do not dispose of this product inappropriately or throw it into the fire.
5. Clean it with a dry cloth.
6. Do not place this ítem near sources of heat or expose to direct sunlight.
7. Do not insert any metal objects into this device as there is a risk of causing a short circuit in the unit.
8. To avoid risk, do not place any metal objects between the charger and the mobile device during the charging process.
9. Do not use mobile devices with a metal case.
10. Keep out of reach of children.

FCC statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment The distance between user and products should be no less 20cm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>