ACU-RITE 02016 Weather Station Instruction Manual

Instruction Manual
Weather Station
model 02016 / 02040

Questions? Contact Customer Support at
877-221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference.

Unpacking Instructions

Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab and peel off to remove.

Package Contents

1. Display unit
2. Outdoor sensor
3. Power adapter
4. Instruction Manual

IMPORTANT| PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
---|---
PRODUCT REGISTRATION
Register online to receive 1 year warranty protection www.AcuRite.com|

Features & Benefits

OUTDOOR SENSOR

1. Integrated Hanger
   For easy placement.

2. Wireless Signal Indicator
   Flashes when data is being sent to the display unit.

3. Battery Compartment

4. A-B-C Switch
   ID code that must match display’s A-B-C switch to ensure units synchronize.

5. Battery Compartment Cover

Features & Benefits 

DISPLAY UNIT

1. Moon Phase

2. Display Low Battery Indicator

3. Current Indoor Temperature Arrow icon indicates the direction the temperature is trending.

4. Indoor Temperature Low/High Records
   Lowest and highest indoor temperature recorded since midnight.

5. Current Indoor Humidity
   Arrow icon indicates the direction the humidity is trending.

6. Humidity Level Indicator
   Indicates a high, low or ideal indoor humidity comfort level.

7. Indoor Humidity Low/High Records Lowest and highest indoor humidity recorded since midnight.

8. 12 to 24 Hour Weather Forecast
   Self-Calibrating Forecasting pulls data from your sensor to generate your personal forecast.

9. Learning Mode Icon
   Disappears after weather forecast selfcalibration is complete.

10. Momentary Backlight Button

11. Auto or Manual Pressure Mode
    Indicates pressure mode preference.
    Auto Pressure Mode
    Pressure will self-calibrate over a 14 day Learning Mode.
    Manual Pressure Mode
    Indicates raw pressure value, no adjustment for sea level (can be calibrated).

12. Barometric Pressure
    Arrow icon indicates the direction the pressure is trending.

13. Outdoor Humidity Low/High
    Records
    Lowest and highest outdoor humidity recorded since midnight.

14. Current Outdoor Humidity
    Arrow icon indicates the direction the humidity is trending.

15. Outdoor Temperature Low/High
    Records
    Lowest and highest outdoor temperature recorded since midnight.

16. Current Outdoor Temperature
    Arrow icon indicates the direction the temperature is trending.

17. Outdoor Sensor Signal Strength

18. Sensor Low Battery Indicator

19. Date

20. AUTO DIM Mode Indicator (page 7)

21. Intelli-Time® Clock
    Automatically updates itself for Daylight Saving Time.

Features & Benefits 

BACK OF DISPLAY UNIT

1. Adjust Up Button for setup preferences.

2. Setup Mode Button for setup preferences.

3. Adjust Down Button for setup preferences.

4. All-Time Records Button
   Press to access all-time high and low records.

5. Battery Compartment

6. Plug-in for Power Adapter

7. A-B-C Switch
   ID code that must match sensor’s A-B-C switch to ensure units synchronize.

8. Reset Button
   Full reset to factory defaults.

9. Power Adapter

10. Battery Compartment Cover (not shown)

Sensor Setup

1. Set the A-B-C Switch
   The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize.

2.  Install or Replace Batteries
   AcuRite recommends high quality alkaline or lithium batteries in the outdoor sensor for the best product performance. Heavy duty or rechargeable batteries are not recommended.
   The sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the sensor for temperatures below -4ºF / -20ºC. 1. Slide off the battery compartment cover. Take note of the A-B-C switch setting inside the batterycompartment for display unit setup.
   2. Insert 2 x AA batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment.
   3. Replace the battery cover.

Display Unit Setup

1.  Set the A-B-C Switch
   Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C.
   You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize.

2. Install or Replace Backup Batteries (optional)
   1. Remove the battery compartment cover.
   2. Insert 3 x AAA alkaline batteries into the battery compartment, as shown.
   Follow the polarity (+/–) diagram in the battery compartment.
   3. Replace the battery cover.

3. Plug in Power Adapter
   For the best performance, plug in the power adapter as the main power source for this product.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fre, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

Intelli-Time ® Clock

Intelli-Time products are pre-programmed with the correct time and date.
Intelli-Time technology instructs the time and date to set themselves. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically set itself and change for Daylight Saving Time.
Set the Time, Date & Units 
Press the “ ” button, located on the back of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display. “
To adjust the currently selected (flashing) item, press and release the “ “ buttons or (press and HOLD to fast adjust).
To save your adjustments, press and release the “ ” button again to adjust the next preference. The preference set order is as follows:
TIME ZONE ( PST MST CST EST AST HAST AKST)
DST (Daylight Saving Time ON or OFF)
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
PRESSURE UNITS (inHg or hPa)
If you live in an area that observes DST, DST should be set to ON, even if it is not currently Daylight Saving Time.
You will automatically exit SET MODE if no buttons are pressed for 10 seconds.
Enter setup mode at any time by pressing the “ ” button.
Display Backlight Settings
This weather station’s color display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (30%) brightness Using battery power alone, the backlight is available momentarily for 10 seconds by pressing the “BACKLIGHT” button.
When display is powered with the power adapter, backlight remains on at 100% brightness. Press “BACKLIGHT” button once to dim to 60% brightness; press again to dim to 30%, press a 3rd time to enter “AUTO DIM” mode.

AUTO DIM MODE: Automatically adjusts display brightness based on time of day & year.

MARCH 11- NOVEMBER 4| 6:00 a.m. – 9:00 p.m. = 100% brightness
9:01 p.m. – 5:59 a.m.= 30% brightness
NOVEMBER 5 – MARCH 10| 7:30 a.m. – 7:00 p.m.= 100% brightness
7:01 p.m. – 7:29 a.m. = 30% brightness

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product.

| Display Unit Placement
Place the display unit in a dry area free of dirt and dust.
Display unit stands upright for tabletop use.
---|---
| Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
Sensor is water resistant and is designed for general outdoor use, however, to extend its life place the sensor in an area
protected from direct weather elements.
Hang the sensor using the integrated hang holes or hanger, or by using string (not included) to hang it from a suitable location,
like a well covered tree branch. The best location is 4 to 8 feet above the ground with permanent shade and plenty of fresh air
to circulate around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct sunlight and away from any heat sources or vents.
• Display unit and outdoor sensor must be within 330 ft (100 m) of each other.
• To maximize wireless range, place units away from large metallic items, thick walls, metal surfaces, or other objects that may limit wireless communication.
• To prevent wireless interference, place both units at least 3 ft (.9 m) away from electronic devices (TV, computer, microwave, radio, etc.).

Setup is Complete
The sensor will now synchronize with the display unit. It may take a few minutes for synchronization to complete. Please refer to the troubleshooting section of this manual if anything appears to be functioning improperly.

OPERATION

Using the Weather Station
Learning Mode
Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibrated pressure is tuned in to your location and the unit is ready for superior weather prediction.
Weather Forecast
AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of weather conditions for the next 12 to 24 hours by collecting data from the sensor in your backyard. It generates a forecast with pinpoint accuracy – personalized for your exact location.

View the complete list of icons at www.AcuRite.com/acurite- icons
Barometric Pressure
Subtle variations in barometric pressure greatly affect the weather. This weather station displays the current pressure with an arrow icon to indicate the direction the pressure is trending (FALLING, STEADY, or RISING).
Moon Phase
Track the phases of the moon, conveyed through simple lunar phase icons:

High & Low Records
Today’s high and low records are displayed for indoor and outdoor temperature and humidity. Today’s records automatically clear at 12:00am midnight every day.
To manually clear all of today’s LOW recorded values, press and hold the ” button for 2 seconds. Dashes display to confirm you have cleared the  LOW records.
To manually clear all of today’s HIGH recorded values, press and hold the ” button for 2 seconds. Dashes display to confirm you have cleared the HIGH records.
Press the “ ” button to cycle through the all-time high and low recorded values (one record is shown at a time) for outdoor and indoor temperature and humidity. Located in the top right corner of the screen, a date and time stamp are shown for when each value was recorded. You will automatically exit all- time records if no buttons are pressed for 5 seconds.
To manually clear an all-time LOW record, press and hold the “ ” button for 2 seconds while viewing the record you wish to clear. Dashes display to confirm you have cleared the record.
To manually clear an all-time HIGH record, press and hold the “ ” button for 2 seconds while viewing the record you wish to clear. Dashes display to confirm you have cleared the record.

Troubleshooting

No outdoor sensor reception
Tull
no bars| If the wireless signal indicator shows no bars:
• Relocate the display unit and/or the outdoor sensor.
The units must be within 330 ft (100 m) of each other.
• Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communication (such as TVs, microwaves, computers, etc).
• Use standard alkaline batteries (or lithium batteries in sensor when temperature is below -4ºF/-20ºC). Do not
use heavy duty or rechargeable batteries. NOTE: It may take up to 20 minutes for display unit and sensor to synchronize after batteries are replaced.
---|---
Display screen not working| • Check that the batteries are installed correctly.
Batteries may need to be replaced.
• Reset display by pressing the RESET button, located on the back of the display unit. Date and time will need to be entered after a reset.
Outdoor temperature is flashing or showing dashes| Flashing of the outdoor temperature is generally an indication of wireless interference.
1. Bring both the sensor and display unit indoors and remove at least one battery from each.
2. Make sure the A-B-C switch on both units match.
3. Reinstall the battery in the outdoor sensor.
4. Reinstall the battery in the display unit.
5. Let the units sit within a couple feet of each other  for about 20 minutes to gain a strong connection.
Inaccurate forecast| • Weather Forecast icon predicts conditions for the next 12 to 24 hours, not current conditions.
• Has Learning Mode icon disappeared from the display unit? Learning Mode must complete before forecast and pressure will be accurate.
• Allow unit to run continuously for 33 days. Battery removal or resetting the display unit will restart Learning Mode. After 14 days, forecast should be fairly accurate, however Learning Mode calibrates for a total of 33 days.
Inaccurate temperature or humidity| • Make sure both the display unit and sensor are placed out of direct sunlight and away from any heat sources or vents (see page 8).
• Make sure both units are positioned away from moisture sources (see page 8).

If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call 877-221-1252 for assistance.

Care & Maintenance

Display Unit Care
Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air.
Outdoor Sensor Care
Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Calibration

The indoor / outdoor temperature and humidity readings, and barometric pressure can be calibrated on the display unit to improve accuracy. Calibration can improve accuracy when sensor placement or environmental factors impact the data accuracy.

1. To access calibration mode, press AND HOLD the ”, “ ”, and “ ” buttons simultaneously for at least 5 seconds.
2. To adjust the currently selected (flashing) item, press and release the “ “ or “ “ buttons to calibrate the data value higher or lower from the actual reading.
3. To save your adjustments, press and release the “ ” button to adjust the next preference. The “ ” icon will remain illuminated next to calibrated values.

The preference set order is as follows:
OUTDOOR TEMPERATURE
OUTDOOR HUMIDITY
INDOOR TEMPERATURE
INDOOR HUMIDITY
BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)
To change from AUTO to MANUAL pressure mode and vice versa, press AND HOLD the “ ” button for at least 10 seconds. The display indicates the current pressure mode selected,“AUTO” or “MANUAL”.
After 20 seconds of inactivity, the display will save the adjustments and exit calibration mode. Note: Calibrations will be erased if the display is reset or if batteries are removed and the power adapter is unplugged.

Replace Intelli-Time Battery

1. Locate the coin cell battery compartment door on the back of the display unit.
   Unscrew and remove the compartment cover.

2.  Insert 1 x CR2032 coin cell battery into the battery compartment, as shown. Install battery with “+” positive terminal facing OUT.

3.  Screw in the battery cover.

WARNING: THIS PRODUCT CONTAINS A BUTTON-CELL BATTERY. IF SWALLOWED, IT~ COULD CAUSE SEVERE INJURY OR DEATH IN JUST 2 HOURS.
SEEK MEDICAL ATTENTION IMMEDIATELY IF INGESTED.

Specifications

Indoor: 32°F to 122°F; 0°C to 50°C
HUMIDITY RANGE| 1`)/0- 99% RH (relative humidity)
WIRELESS RANGE| 330 ft / 100 m depending on home construction materials
OPERATING FREQUENCY| 433 MHz
POWER| Display: 5v power adapter
3 x AAA alkaline batteries (optional)
Sensor: 2 x AA alkaline or lithium batteries
DATA REPORTING| Outdoor Data: 16 second updates
Indoor Data: 60 second updates

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference received, including interference that may cause undesired operation of the device.

Customer Support
AcuRite customer support is committed to providing you with best-inclass service. For assistance, please have the model number of  thisproduct available and contact us in any of the  followingways:
****877-221-1252
info@chaney-inst.com
24/7 support at www.AcuRite.com
► Installation Videos
► Register your Product
► Instruction Manuals
► Support User Forum
► Replacement Parts
► Submit Feedback & Ideas

IMPORTANT| PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
---|---
PRODUCT REGISTRATION
Register online to receive 1 year warranty protection www.AcuRite.com|

Limited One Year Warranty

At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co.
warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase.
We recommend that you visit us at www.AcuRite.com for the fastest way to register your product. However, product registration does not eliminate the need to retain your original proof of purchase in order to obtain warranty benefits.
Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. Remedy for breach of this warranty is limited to repair or replacement of the defective item(s). Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. Transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which have received normal wear and tear, been damaged (including by acts of nature), tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney. The above-described warranty is expressly in lieu of all other warranties, express or implied, and all other warranties are hereby expressly disclaimed, including without limitation the implied warranty of merchantability and the implied warranty
of fitness for a particular purpose. Chaney expressly disclaims all liability for special, consequential or incidental damages, whether arising in tort or by contract from any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Chaney further disclaims all liability from personal injury relating to its products to the extent permitted by law. By acceptance of any of Chaney’s products, the purchaser assumes all liability for the consequences arising   from their use or misuse. No person, firm or corporation is authorized to assume for Chaney any other liability in connection with the sale of its products. Furthermore, no person, firm or corporation is authorized to modify or waive the terms of this paragraph, and the preceding paragraph, unless done in writing and signed by a duly authorized agent of Chaney. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
For in-warranty claims: Chaney Instrument Co. 965 Wells St., Lake Geneva, WI 53147

ACU ► RITE.
It’s more than accurate, it’s
AcuRite offers an extensive assortment of precision instruments,  designed to provide you with information you can depend on to Plan your day with confidence™.
www.AcuRite.com
Printed in China
02040 INST 103013
©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy- rights are the property of their respective owners. AcuRite uses patented technology.
Visit www.AcuRite.com/patents for details.

References

• Home
• AcuRite Weather Monitoring | #1 Weather Station Brand in North America
• Icon Definitions and Terminology | AcuRite

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>