DECKED 221 TBFDL Truck Toolbox Instruction Manual
- June 13, 2024
- DECKED
Table of Contents
TOOL BOX INSTALLATION
TOOLS NEEDED:
- 3/8” socket
- Ratchet
STEP 1: Place rubber pads on bed rails.
(1) per side.
STEP 2: Unless you’ve experienced radiation exposure (allowing you to
mutate into The Hulk) grab a friend to help you lift the Tool Box into place
on top of the rubber pads. Center the Tool Box L-R between the bed rails and
align square to the bed on both sides. 
STEP 3:
Make sure there is adequate distance (at least 2”) between the Tool Box lid
and any cab mounted cameras, lights or otheimportant bits.
Use 2” cardboard spacer provided in your hardware kit to confirm clearance.
Fold spacer 90 degrees at perforation, remove adhesive backing and stick to
the center of the
Tool Box lid. Open lid and shift the Tool Box toward the tailgate as needed to
ensure correct positioning.
STEP 4: NOTE (ALUMINUM BED FORD OWNERS): Install anti-rub tape provided
in your hardware kit to the mounting bracket if the bracket will come in
contact with paint or metal on your truck bed (anti-rub tape is not necessary
if the bracket contacts plastic). Install (2) bed rail clamps on each side of
the Tool Box using one location as close to the tailgate as possible and one
location as close to the cab as possible. NOTE: Outermost clamp locations vary
per vehicle depending on the topology of the bed rails.
Secure clamps with bolts, washers and nuts in order shown. Tighten all four
bolts. Test tightness by closing Tool Box lid and pulling on the handles, L-R
and front to back.
USING THE LADDER:
WATCH LADDER INSTRUCTIONAL VIDEOS: DECKED.COM/LADDER
DECKED LIMITED LIFETIME WARRANTY:
DECKED LLC warrants to the original purchaser of this product that the product
will be free from defects in material and workmanship from the date of
purchase and continuing for the expected lifetime of the DECKED product. The
DECKED Product must be registered by the original purchaser with DECKED, LLC
via its website at DECKED.COM/REGISTER, and a
copy of the original sales receipt must be supplied to the Manufacturer at the
time a warranty claim is made. The warranty terminates if the original
purchaser transfers the DECKED product to any other person or vehicle. The
original purchaser must contact the DECKED LLC customer service team and
provide a description of the defective part, including digital pictures if
requested, with the original purchase documentation as validation of warranty
coverage or have previously activated their warranty online.
This warranty DOES NOT cover or apply to:
- Damage to the product due to misuse, mishandling and abuse.
- Products not used in accordance with the manufacturer’s instructions or recommendations.
- Product not assembled or installed according to manufacturer’s instructions.
- Normal wear and tear.
- Undeclared damage to the system during shipping, acts of God. In addition, consequential damage and incidental damages (including lost time) such as damage to persons or property are not covered under this warranty.
More information: DECKED.COM/WARRANTY
REGISTER YOUR DECKED GEAR: DECKED.COM/REGISTER
WARNING:
Failure to read and follow instructions for DECKED Tool Box installation and ladder usage may result in personal injury, or cause damage to the vehicle. Please read our comprehensive DECKED Tool Box warning in detail: DECKED.COM/LADDER
FOLLOW US:
@DECKEDUSA
DECKEDUSA
DECKED.COM
208-806-0251
TBFDL | v.2
References
- DECKED Truck Bed Storage, Tool Boxes & Truck Accessories
- DECKED® Toolbox Ladder Complete Guide
- Register Your DECKED Truck Bed Organizer System | DECKED Accessories
- DECKED® Lifetime Warranty