INSIGNIA NS-HAIOR18, NS-HAIOR18-C All in One Shelf System User Guide

: June 13, 2024
: Insignia

QUICK SETUP GUIDE

All-in-One Shelf System

NS-HAIOR18 / NS-HAIOR18-C

PACKAGE CONTENTS

All-in-One Shelf System
Power cord
FM antenna
Remote control
2 AAA batteries
Quick Setup Guide

FEATURES

80W RMS total power for a superior listening experience
20W RMS left and right channels play audio in surround sound
40W RMS built-in subwoofer for rich bass
Bluetooth connects to devices wirelessly
FM tuner lets you listen to the radio
CD player provides a variety of audio options
USB port supports MP3 playback
3.5 mm audio input connects to analog devices
Headphone jack enables private listening

Before using your new product, please read these instructions to prevent any damage.

Front view

INSIGNIA NS-HAIOR18, NS-HAIOR18-C All in One Shelf System
A1

SPEAKER
SOURCE
REMOTE SENSOR
PLAY/PAUSE
DISPLAY
DISC SLOT
VOLUME –/+
STANDBY
USB PORT
LINE IN
HEADPHONE JACK
PREVIOUS
NEXT
EJECT DISC
SUBWOOFER

Back panel

FM ANTENNA JACK
POWER ON/OFF
AC POWER INPUT

Remote control

STANDBY
EJECT DISC
REPEAT
VOLUME +
REWIND/PREVIOUS/TUNE –
PRESET –/10 –
FOLDER –/DIM –
CLOCK
MUTE
SOURCE
AUTO/STOP
PLAY/PAUSE
FAST FORWARD/NEXT/TUNE +
VOLUME –
PRESET+/10+
FOLDER+/DIM+
ALARM/PROGRAM
Equalizer mode

A

INSTALLING THE REMOTE CONTROL BATTERIES

Remove the remote’s battery cover.
Insert two AAA batteries into the compartment. Make sure that the + and – symbols on the battery match the symbols in the compartment.
Replace the cover.

SETTING UP YOUR SHELF SYSTEM

CONNECTING THE FM ANTENNA

1 Connect the FM antenna to the ANTENNA jack on the back of your shelf system.
2 Adjust the antenna until you find the best reception.

Back panel

FM ANTENNA JACK
FM ANTENNA

TURNING ON YOUR SHELF SYSTEM

1 Connect the power cord to the AC jack on the back of your shelf system, then plug the other end into a power outlet.
2 Press the power switch on the back to turn your shelf system ON.

Back panel

3 Press (standby) on your shelf system or remote. The shelf system greets you with “HELLO.”

Front view

STANDBY

SETTING THE CLOCK

1 In standby mode, press and hold CLOCK on your remote.
Note: To enter standby mode, flip ON the power switch on the back of your shelf system, but do not press the standby button the front.
2 Press (previous) or (next) to select a 12-hour (“12H”) or 24-hour (“24H”) clock display, then press CLOCK to save.
3 Press (previous) or (next) to set the hour, then press CLOCK to save.
4 Press (previous) or (next) to set the minutes, then press CLOCK to save.

USING YOUR SHELF SYSTEM

BLUETOOTH

Pairing your device

Make sure that your Bluetooth device (like a music player or phone) is turned on and within 33 feet (10 meters) of your shelf system.
On your Bluetooth device, navigate to your Bluetooth settings:
• For iOS devices: Tap Settings > General > Bluetooth.
• For Android devices: Tap Settings > Wireless and networks. Tap to activate Bluetooth, then tap Bluetooth settings.
• For PC or Mac computers: See the instructions that came with your computer for more information.
Press SOURCE repeatedly until the shelf system displays “BT.” Your shelf system enters Bluetooth pairing mode.
Note: If your shelf system isn’t paired in 15 seconds, “NOBT” appears on the screen.
Press SOURCE repeatedly to cycle back to “BT” to re-enter pairing mode. For best results, try to enable Bluetooth on your Bluetooth device (step 2) and select the source on your shelf system (step 3) at the same time.
On your Bluetooth device, select NS-HAIOR18 in the list of devices. The shelf system beeps twice when paired.
Note: If prompted, enter “0000” as the passcode.

Playback

Use your Bluetooth device to select audio.
Make sure that your Bluetooth device’s volume is set to at least 50%.
Control playback with your Bluetooth device, remote, and the controls on the shelf speaker system (play/pause, mute, previous/next).

USING THE FM RADIO

Note: Make sure that your antenna is attached.

Press SOURCE until the display says “FM.”
To select a radio station:

To incrementally tune the radio frequency, press (previous) or (next).
To search for the next available station, press and hold (previous) or (next).
To skip to a preset station, press PRESET- or PRESET+ repeatedly.
Note: See “Adding a preset station“ for instructions about creating preset stations.

Adding a preset station
Note: You can program up to 20 stations.

Select the station, then press PROG on your remote.
Press PRESET – or PRESET + to select a program number.
Press PROG again to save the preset station.
OR
To program all stations, press AUTO. Your shelf system automatically assigns a program number to each available station.

USING THE CD PLAYER

Your CD player works with CD, CD-R, and CD-RW formats.

1 Press SOURCE until the display says “CD.”
2 Insert your CD label-side up into the disc slot. Playback begins automatically.
3 Use your remote or shelf system to control playback. See your online User Guide for more information.
4 When finished, press (eject) to eject your disc.

CONNECTING WITH USB

Note: You can charge USB devices through the USB port (5V/1A output).

1 Connect a USB flash drive to your shelf system’s USB port.

2 Press SOURCE repeatedly until the display says “USB.”
3 Use the controls on your shelf speaker system or remote to control playback:
• Press or to skip to the previous or next track.
• Press or to navigate through your USB flash drive’s folders.
• Turn the volume knob or press Vol+ or Vol- on your remote to adjust the volume.

CONNECTING WITH AN AUDIO CABLE

1 Connect a 3.5 mm audio cable (not included) from your audio device to the shelf system’s LINE IN jack.

2 Press SOURCE repeatedly until the display says “LINE IN.”
3 Use your audio device to control playback and the controls on your shelf system to adjust the volume.
Note: Make sure that your audio device’s volume is set to at least 50%.

CONNECTING HEADPHONES

• Connect your headphones to the headphone jack.

SPECIFICATIONS

Dimensions (HxWxD): 5.51 x 11.22 x 18.5 in. (140 x 285 x 470 mm)
Weight: 12.8 lbs. (5.8 kg)
Power supply: ~100-240V AC, 50/60Hz
Audio output power: 20W × 2 + 40W
Frequency response: 20Hz~20kHz (±3dB)
CD compatibility: CDs, CD-Rs, CD-RWs in standard or 3” size
Supported file formats (USB): MP3
FM frequency: 87.5 – 107.9 MHz
Operating environment: 14°~95°F (-10°~35°C), 5~90% humidity
Bluetooth: 2.4 GHz, 33 ft. (10 m) working distance
Input jacks: USB and LINE IN

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

For customer service, call 1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico) www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2017 Best Buy. All rights reserved.
Made in China

Documents / Resources

| INSIGNIA NS-HAIOR18, NS-HAIOR18-C All in One Shelf System [pdf] User Guide
NS-HAIOR18, NS-HAIOR18-C, NS-HAIOR18 NS-HAIOR18-C All in One Shelf System, All in One Shelf, Shelf System, Shelf, All in One Shelf System, NS-HAIOR18 All in One Shelf System, NS-HAIOR18-C All in One Shelf System
---|---