FEVM FN Series Mini PC User Manual
- June 13, 2024
- FEVM
Table of Contents
FEVM FN Series Mini PC
CAUTIONS
Your Mini PC is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions.
Setting up your system
- Read and follow all instructions in the documentation before you operate your system.
- Do not use this product near water or a heated source.
- Set up the system on a stable surface.
- Openings on the chassis are for ventilation. Do not block or cover these openings. Make sure you leave plenty of space around the system for ventilation. Never insert objects of any kind into the ventilation openings.
- Use this product in environments with ambient temperatures between 0 C and 35 C.
- If you use an extension cord, make sure that the total ampere rating of the devices plugged into the extension cord does not exceed its ampere rating.
- This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Care during use
- Do not walk on the power cord or allow anything to rest on it.
- Do not spill water or any other liquids on your system.
- When the system is turned off a small amount of electrical current still flows.
- Always unplug the power cord from the power outlets before cleaning the system.
- If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer.
- The power cord or plug is damaged.
- Liquid has been spilled into the system.
- The system does not function properly even if you follow the operating instructions.
- The system was dropped or the cabinet is damaged.
- The system performance changes.
Lithium-lon Battery Warning
CAUTION: Danger of explosion if the battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
Specification
Item
Code Name
| minipc
Alder Lake-N
| FN100/ FN305
Intel
---|---|---
CPU
Memory
| Process
DDR4
| N100,4Cores/4Threads,Max To 3.4Ghz N305,8Cores/8Threads,Max To 3.8Ghz
Max support up to 32G DDR4 3200
Storage| SSD| M.2 2280 PCIE/SATA
Wireless
1/0
| ****
DC-IN Jack
| 80211 a/b/g/n/ac/ax and Bluetooth
x1
| USB 30 GEN2| x2
| USB 3.0 GEN1| x2
| HDMI| x1
| DP| x1
| Type-C| x1
| LAN| x2
| Audio Jack| x1
| Reset| x1
Power
| Power button
DC
| x1
12V/3A
System| | Windows 11 / Linux
Know Your Mini PC
- Power Buttom
- Audio Jack
- USB3.0 Type-C
- USB3.0 Type-A
- USB3.0 Type-A
- DisplayPort
- HDMI
- RJ45 (10/100/lOOOM)
- Power Input
Gettng started
Connect the AC power adapter to your Mini PC:
- Connect the DC power connector into your Mini PC’ s power (DC)
- Plug the AC power adapter into a 100V-240V power source.
NOTE:
- The power adapter may vary in appearance, depending on models and your region.
- Connect a display monitor to your Mini PC:
- Connect one end of an HDMI cable to an external display, and the other end of the cable to your Mini PC’ s HDMI port.
- Connect a keyboard and mouse to your Mini PC:
- You can connect generally any USB keyboard and mouse to your Mini PC.
- You can also connect a USB dongle for a wireless keyboard and mouse set.
- Turn on your Mini PC
- Press the power button to turn on your Mini PC
- Turn off your Mini PC
- If your Mini PC is unresponsive, press and hold the power button for at least four (4) seconds until your Mini PC turns off.
Enter the BIOS Setup
WARNING!
BIOS (Basic Input and Output System) stores system hardware settings that are
needed for system startup in the Mini PC.
In normal circumstances, the default BIOS settings apply to most conditions to
ensure optimal performance.
Do not change the default BIOS settings except in the following circumstances:
- An error message appears on the screen during the system bootup and requests you to run the BIOS Setup.
- You have installed a new system component that requires further BIOS settings or updates
WARNING!
- Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of trained service personnel.
- Load default BIOS settings
- Enter the BIOS by pressing
on the POST screen - Enter Fast Boot by pressing
on the POST screen
WARNING
- This equipment is not suitable for use in locations where children are likely to be present.
- The Warranty does not apply to the products that have been disassembled by users
- Each Mini PC has its unique SN code, which is at the bottom of the product.
- When you need our after-sales support, please provide us with SN code to ensure that you could enjoy our quick and accurate service.
EC Conformity Statement
This product and – if applicable – the supplied accessories too are marked
with “CE” and comply therefore with the applicable harmonized European
standards listed under the EMC Directive 2014/30/EU, the LVD Directive
2014/35/EU, the RoHS Directive 2011/65/EU. Wi-Fi device: the RE Directive
2013/53/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be
disposed of as unsorted municipal waste in the European Union. For proper
recycling, return this product to your local supplier upon the purchase of
equivalent new equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info
2006/66/EC (battery directive): This product contains a battery that cannot be
disposed of as unsorted municipal waste in the European Union. See the product
documentation for specific battery information. The battery is marked with
this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb),
or mercury (Hg). For proper recycling, return the battery to your supplier or
to a designated collection point. For more information see:
www.recyclethis.info.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not
expressly approved by the party responsible for compliance. such modifications
could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
To maintain compliance with FCC’s RF exposure guidelines, the distance must be
at least 20 cm between the radiator and your body, and fully supported by the
operating and installation configurations of the transmitter and its
antenna(s).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>