Dual D2WC7 Media Receiver with Wireless and Wired CarPlay and Android Auto 7 Inch Digital TFT Display User Guide
- June 13, 2024
- Dual
Table of Contents
- Dual D2WC7 Media Receiver with Wireless and Wired CarPlay and Android
- Product Information
- Installation
- Control Locations
- Main Menu
- Audio Operation
- USB Operation
- Bluetooth Operation
- Wired & Wireless CarPlay Operation
- Wired & Wireless Android AutoTM Operation
- General Operation
- Limited One Year (Or Two Year*) Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Dual D2WC7 Media Receiver with Wireless and Wired CarPlay and Android
Auto 7 Inch Digital TFT Display
Product Information
Product Name: D2WC7
Model: Media Receiver
Features: Wireless and Wired CarPlayTM and Android AutoTM
Display: 7″ digital TFT Display
Website: www.dualav.com
Customer Service: 1-866-382-5476
(Monday-Friday, 9AM-5PM EST)
Wiring Diagram – Inputs/Outputs
Installation
Install the D2WC7 in a location where it will not be subject to dust, dirt, or excessive vibration. Use the provided wiring diagram to connect the GPS antenna, power adapter, USB input, and microphone cable.
Before You Start
- Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Control Locations
- POWER/MUTE button
- DIMMER button
- VOICE ACTIVATION BUTTON
- MICROPHONE
Main Menu
In the main menu, press the desired icon to enter the corresponding mode:
- Apple CarPlay/Android Mirror
- BT Phone
- BT Audio
- USB
- Settings
- FM Transmitter
Tuner Transmitter
- Main Menu
- Current Mode Indicator
- Keypad
- TX ON/OFF
Audio Operation
Press the Settings icon on the main menu screen to adjust:
- Fader and Balance controls
- Equalizer (16-Band Tone Control and 8 Presets EQ Settings)
USB Operation
From the main menu, touch the USB icon on the main screen. Use the provided controls for:
- Main Menu
- Current Mode Indicator
- EQ
- Search
- List
- Repeat
- Random
- Track Down
- Play/Pause
- Track Up
Bluetooth Operation
Before using Bluetooth
Before using Bluetooth for hands-free calls or audio streaming, the device must be authenticated (paired). Refer to the owner’s manual of your Bluetooth device for pairing instructions.
Pairing a New Device
The unit broadcasts the pairing signal constantly when no devices are currently connected. Complete the pairing sequence from your Bluetooth device. The device name is D2WC7. Pairing may need to be done more than once on certain phones.
Connect
The head unit will automatically connect to the last connected device when the connect feature is set to Auto Connect On. If the connect feature is set to Auto Connect Off, the head unit will not automatically connect to any device.
Bluetooth Phone
From the main menu, touch the Bluetooth icon on the screen. The Bluetooth icon will appear anytime a Bluetooth device is connected.
Dialing a Number
Press to display the keypad and dial a number.
Making and Ending a Call
Press to connect a call, and press to end a call.
Transferring Audio
Press to transfer audio between the head unit and mobile phone.
Streaming Audio
Press to play or pause the music. Press to skip to the previous track. Press to advance to the next track.
Wired & Wireless CarPlay Operation
Wired connection
- Connect an Apple CarPlay compatible device to this unit via USB.
- Press the Apple CarPlay icon. The Apple CarPlay home screen will appear.
Wireless connection
Before using Apple CarPlay wirelessly, turn on the Bluetooth/Wifi function on
the Phone.
- Press play icon on the main menu;
- Press tick to confirm to use wireless CarPlay;
- Press search icon to search phone device. The available devices appear on the list;
- Find the desired device on the screen and press “Pair”;
- A pass key will be displayed on the screen;
- The same key appears on the iPhone, press “Pair” and then press “Allow” for the popups;
- Press “Tick” on the screen to confirm to connect;
- Press “Use CarPlay” on the iPhone. The unit configures the connection then starts the application.
Tip : Press connect icon. Displays CarPlay device list. This icon appears Only When CarPlay is connected and two or more devices can be used as CarPlay Source.
Wired & Wireless Android AutoTM Operation
Wired connection
- Connect an Android AutoTM compatible device to this unit via USB.
- Press the Android Auto icon. The Android Auto home screen will appear.
Wireless connection
Before using Android Auto wirelessly, turn on the Bluetooth/Wifi function on
the Android device.
- Press Up icon on the main menu;
- Press “Tick ” to confirm to use wireless Android Auto;
- Press “Search”icon to search phone device. The available devices appear on the list;
- Find the desired device on the screen and press “Pair”;
- A pass key will be displayed on the screen;
- The same key appears on the Android device, press “Pair” and then press “Allow” for the popups;
- Press “Tick” on the screen to confirm to connect;
The unit configures the connection then starts the application.
Tip : Press “Connect ” icon. Displays Android Auto device list. This icon appears Only When Android Auto is connected and two or more devices can be used as Android Auto Source.
General Operation
From the Main Menu screen, select Setup to access the Settings menu. Select a category from the icons at the bottom of the screen (General, Audio, Display, Others), and adjust the available options using the touch screen.
Limited One Year (Or Two Year*) Warranty
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from (or two years*) the date of the original purchase. Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail
purchaser for products purchased from an authorized Dual dealer and used in
the U.S.A.
What is covered? This warranty covers all defects in material and
workmanship in this product.
The following are not covered: software, installation/removal costs,
damage resulting from accident, misuse, abuse, neglect, product modification,
improper installation, incorrect line voltage, unauthorized repair or failure
to follow instructions supplied with the product, or damage occurring during
return shipment of the product. Specific license conditions and copyright
notices for the software can be found via
www.dualav.com.
Warranty Coverage
Limited 1-year warranty when purchased from an authorized Dual dealer. or
*Limited 2-year warranty when purchased from and professionally installed by
an authorized Dual dealer.(Proof of purchase and Installation required)
What to do?
- Before you call for service, check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
- If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
- Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment.
- For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
- Call us toll-free at 1-866-382-5476 (Monday-Friday, 9:00 a.m,to 5:00 p.m,EST)
- E-mail us at cs@dualav.com
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note : The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>