soundcore A3118 Motion Boom Outdoor Speaker User Manual
- June 13, 2024
- Soundcore
Table of Contents
soundcore A3118 Motion Boom Outdoor Speaker User Manual
At a Glance
- Bass button
- Bluetooth button
- Volume down button
- Multi-function button
- Volume up button
- Power button
- TWS button
- USB-A port for charging out
- USB-C port for charging in
Charging
Charge your Speaker
- Use a certified USB-C cable and charger to prevent any damage
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
- Disconnect this speaker from the charger when fully charged. Do not charge for extended periods.
| Flashing red| Low battery
---|---|---
| Steady red| Being charged
| Stead white| Fully charged
Charge your USB Devices
Charge your USB devices through the USB -A charging port.
Powering On/Off
Press and hold for 2 seconds
Steady white Power on
Press and hold for 2 seconds
Light off Power off
This speaker will power off automatically after 30 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
With this speaker, you can enjoy music through you Bluetooth enabled devices
Press Enter Bluetooth pairing mode
Flashing blue Bluetooth pairing
Steady blue Bluetooth connected
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical Soundcore speakers can pair up with each other for true wireless
stereo sound. In TWS mode, connect either one of the two speakers with your
mobile device so that both speakers play the same audio (one as L channel and
the other as R channel). On both Soundcore speakers, press the TWS button to
enter TWS pairing mode.
- The speakers start searching for each other to establish the TWS connection. The TWS LED indicator on both speakers will flash white.
- Once successfully connected, the TWS LED indicator on both speakers will become steady white.
Press Play/Pause
Press twice Next track
Press three times Previous track
-1+ Press or press and hold Adjust volume
BASS Press Turn BassUp on/off
Press Answer/End a call
Press Answer a second incoming call and put the current call on hold
Press and hold for 2 seconds Reject an incoming call
Press and hold for 2 seconds Switch between a call on hold and an acitve
call
Press and hold for 2 seconds Activate Siri or other voice assistant
software
Soundcore App
Download the Soundcore app to enhance your experience.
Product information: Check the product name and software version, or read
the user manual. Firmware update: You will be informed once a new version
of firmware is detected when you connect the speaker with the app.
Battery status: Indicates the remaining battery level of your speaker.
Volume control: Adjust the volume level via the app without pressing the
buttons on the speaker.
EQ settings: There are 4 EQ settings you can choose from in the app to
optimize your experience while enjoying different music genres.
- Soundcore Signature: Normal EQ mode with well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Treble Boost: High frequencies are enhanced.
- Balance: No enhancement for high-frequency and low-frequency sounds.
Set Auto-power off time: Set an auto-power off time (5/10/30/60 minutes,
30 minutes by default), the speaker will automatically power off when time is
up.
Voice prompt: Mute or restore the voice prompt while powering on/off.
Google Play and the Google Play logo are trademarks of Google Inc
Apple and the Apple logo are trademarks of Apple Inc.
Specifications
DC power input SWZ A
Battery capacity 10000 mAh
USB output 5V=1A
Audio output power 30 W
Charging time 4 hours
Playtime(varies by volume level and music content) . . Up to 24 hours
Waterproof level IPX7
Bluetooth version 5.0
Bluetooth range 20 m/ 66 ft