Theater Solutions TS4 4 Loudspeaker Switcher Instruction Manual
- June 13, 2024
- Theater Solutions
Table of Contents
Theater Solutions TS4 4 Loudspeaker Switcher
Congratulations on the purchase of your Theater Solutions TS8 (TS4、TS6) loudspeaker switcher. When used with your current audio/home-theatre system, the TS8 (TS4、TS6) will allow you to add up to 8 pairs of loudspeakers, while providing protection for your amplifier/receiver. The TS8 (TS4、TS6) was manufactured with high quality components and engineered to provide you with many years of trouble free listening enjoyment. Though easy to install, we recommend that you read carefully through this instruction manual and save your bill of sale in the unlikely event that your loudspeaker switcher requires servicing. Adding additional loudspeakers around your home is now simple, thanks to the Theater Solutions loudspeaker selector. The TS8 (TS4、TS6) has been designed to let you turn on or off any combination of up to 8 pairs of loudspeakers without purchasing additional amplifiers.
Safety Instructions
- We recommend that the amplifier/receiver be turned OFF while making any connections.
- Do not use wherever there is a risk that the switcher may come into contact with water or excessive moisture, such as near pools, bathtubs and wet basements.
- In the event of a malfunction, do not attempt to service the product yourself. Please contact Theater Solutions.
Front Panel
Controls
- Loudspeaker selectors 1 through 8 ( or 4 or 6) – Press the button in to listen to the desired loudspeakers.
- Single Pair Direct Switch – Impedance protection switch for the amplifier/receiver. Use as directed in this owners manual.
Rear Panel
- Connection from amplifier – from the L(left) and (right) ‘loudspeaker output of your receiver or amplifier.
- Loudpeaker Connections – connections to be made from the TS8 (TS4. TS6) to the desired loudspeakers, with the corresponding selector on the front panel.
Typical Hook Up
The diagram below shows an overview of a typical system using 8 ( or 4 or 6 ) loudspeaker pairs. Overview of typical system
Installation Tips
- 18 or 16 gauge stranded loudspeaker wire is recommended. 14 gauge is recommended for runs longer than 50 feet.
- You can mix any combination of 4, 6, 8 and 16 ohm loudspeakers
- Wire according to local laws. Specific “CL” fire rating may be required according to your local building codes. Your dealer may know more about obtaining such wire.
- Avoid running close to AC power wiring for safety and to avoid the possibility of picking up any noise
Installation
Make sure power to vour receiver or power amplifier is off before doing any wiring.
- To make a connection, strip 3/8″ of insulation from the end of the wire. Twist the wire ends so that there are no frayed wires.
- Push the tab and insert the wire into the correct input.
Connect the wires from the loudspeaker output of your receiver or amplifier to the terminals marked INPUTS on the TS8 (TS4. TS6). Connect the “+” output from the right front output on the amplifier to the right “+” on the TS8 (TS4, TS6) and connect the “” output from your amplifier to the “-” input of the switcher. Likewise, connect the left channel wires to the left inputs. Ensure that the connections are use the loudspeakers to plav out of phase made correctly, as any improper connections will cause the loudspeakers to play out of phase. Connect wires from each of the loudspeakers to the corresponding output connection on the switcher.
Operation
-
Initial connection
For initial turn-on, it is recommended that only one loudspeaker pair be used. Select this loudspeaker pair and turn on your receiver/amplifier. Ensure that sound is coming from both loudspeakers. If there is no sound, check your connections from your amplifier/receiver and the loudspeaker connections. -
Loudspeaker Selector Inputs
Engaging additional front panel controls (1-4 or 6 or 8) will allow the selected loudspeakers to function. -
Single Pair Direct
When listening to a single pair of loudspeakers, especially at high listening levels, it is recommended that the Single Pair Direct be turned ON.
Troubleshooting
Problem: Solution
- No sound: Make sure the correct loudspeaker is selected Make sure no wires are touching each other or the case of the amplifier or the switcher
- Slight drop in volume when PROTECTION is selected: Normal – This is due to the additional resistance added to protect your amplifier
- Unit gets very hot: Reduce volume level Turn unused loudspeakers off If only one loudspeaker pair is used, turn the Single Pair Direct On.
specifications
TS4 Technical specifications
- Outputs: 4 loudspeaker pairs, 4 to 16 ohm impedance
- Wire Gauge: 14 to 22 gauge
- Size (WDH): 81/2″×47/8″×23/16″
- Weight: 2.35 lbs
- Supplied accessories:
- User manual (this document)
- Sheet of front panel labels.
TS8 Technical specifications
- Outputs: 8 loudspeaker pairs, 4 to 16 ohm impedance
- Wire Gauge: 14 to 22 gauge
- Size (WDH): 17″×47/8″×23/16″
- Weight: 4.15 lbs
- Supplied accessories:
- User manual (this document)
- Sheet of front panel labels
TS6 Technical specifications
- Outputs: 6 loudspeaker pairs, 4 to 16 ohm impedance
- Wire Gauge: 14 to 22 gauge
- Size (WDH): 17″×47/8″×23/16″
- Weight: 4.15 lbs
- Supplied accessories:
- User manual (this document)
- Sheet of front panel labels.
Design and specifications are subject to change without notice.
FREQUENTLY ASKED QUESTIONS
What is the Theater Solutions TS4 4 Loudspeaker Switcher?
The Theater Solutions TS4 is a loudspeaker switcher designed to allow you to connect and switch between up to four pairs of speakers in a home audio system.
How does the loudspeaker switcher work?
The TS4 loudspeaker switcher lets you connect multiple pairs of speakers to the switcher and then switch between them to direct audio to the desired set of speakers.
Can I use the TS4 switcher with any type of speakers?
Yes, the Theater Solutions TS4 loudspeaker switcher is generally compatible with most types of passive speakers.
What are the input and output options on the TS4 switcher?
The TS4 switcher typically features four pairs of speaker inputs and one set of speaker outputs.
Can I connect different types of speakers to the switcher?
Yes, you can connect different types of speakers, such as bookshelf speakers, floor-standing speakers, or outdoor speakers, to the TS4 switcher.
How do I switch between different pairs of speakers using the TS4 switcher?
The TS4 loudspeaker switcher usually comes with a front-panel selector or remote control that allows you to switch between speaker pairs.
Is the loudspeaker switcher passive or active?
The TS4 switcher is typically a passive device, meaning it does not require external power to operate.
Can I use the switcher with my AV receiver or stereo amplifier?
Yes, the TS4 loudspeaker switcher is designed to be used in conjunction with an AV receiver or stereo amplifier to manage multiple sets of speakers.
Does the switcher support bi-wiring or bi-amping configurations?
The TS4 loudspeaker switcher does not typically support bi-wiring or bi-amping configurations.
Can I use this switcher for outdoor speaker setups?
Yes, the TS4 switcher can be used to switch between different sets of outdoor speakers for outdoor audio systems.
Can I use the TS4 switcher with my whole-house audio system?
Yes, the loudspeaker switcher is suitable for whole-house audio systems, allowing you to direct audio to different rooms or zones.
Does the TS4 loudspeaker switcher have impedance matching or volume control features?
The switcher may not have built-in impedance matching or volume control features. These functions are typically handled by the connected amplifier or receiver.
Can I use the switcher to create a multi-room audio setup?
Yes, you can use the TS4 switcher to create a multi-room audio setup by connecting different pairs of speakers to the switcher and routing audio to different rooms.
Does the loudspeaker switcher support banana plug connections?
The TS4 loudspeaker switcher is generally compatible with banana plug connections for easy speaker wire connections.
Is the TS4 switcher suitable for professional audio setups?
The TS4 loudspeaker switcher is designed primarily for home audio setups and may not be ideal for professional audio applications.
DOWNLOAD THE PDF LINK:Theater Solutions TS4 4 Loudspeaker Switcher Instruction Manual