INSIGNIA NS-CSPBT03-BL Bluetooth Speaker User Guide

Quick Setup Guide
NS-CSPBT03-BL / NS-CSPBT03-GR / NS-CSPBT03-PK / NS-CSPBT03-PU
Bluetooth Speaker

PACKAGE CONTENTS

• Bluetooth speaker
• USB cable
• Quick Setup Guide

FEATURES

• Stream high-quality music wirelessly
• Rechargeable battery lasts for six hours
• Hang it anywhere with the included carabiner
• Use as a speaker for your smartphone

Top view

CHARGING YOUR SPEAKER

1. Connect the small end of your charging cable to the micro USB port underneath the cover on your speaker.
2. Connect the other end to a USB charging port.
   Note: When the battery is low, the LED blinks red slowly. The speaker will have about 10 minutes of battery life left.

TURNING YOUR SPEAKER ON AND OFF

• Press the button to turn your speaker ON or OFF. The blue LED blinks quickly and the speaker enters pairing mode.

CONNECTING WITH BLUETOOTH

1. Make sure that your Bluetooth device is turned on and within 33 feet (10 meters) of your speaker.

2. On your speaker, press the button. Your speaker enters pairing mode, and the Bluetooth LED blinks. Your speaker remains in pairing mode for 30 seconds or until it pairs with a Bluetooth device.
   Note: Press and hold the button to return to pairing mode.

3. Turn on your Bluetooth device and turn on Bluetooth. Set your device to pairing mode, then select NS-CSPBT03. See the instructions that came with your Bluetooth device for information about pairing.

4. If you are asked for a password, enter 0000. When pairing is complete, the LED on your speaker lights solid blue.

5. To disconnect from the paired Bluetooth device, press and hold the button on your speaker for three seconds. Your speaker disconnects from the Bluetooth device and enters pairing mode again.

RECONNECTING TO A PAIRED DEVICE

When your speaker is not paired to a device, the LED blinks blue slowly.

last connected Bluetooth device and reconnects.
Move the Bluetooth device out of range.| Make sure that your Bluetooth device is within 33 feet of your speaker.
Turn off your Bluetooth device.| Turn on your Bluetooth device, then make sure that Bluetooth is on.
Turn off Bluetooth on your Bluetooth device.| Turn on Bluetooth on your Bluetooth device.
Connect your Bluetooth device to another Bluetooth device.| Disconnect your Bluetooth device from the other Bluetooth device, then set your device to pairing
mode. Select”NS-CSPBT03″ on your Bluetooth device.

Note: If a device does not automatically reconnect, you may need to reselect “NS-CSPBT03” on your Bluetooth device.

USING YOUR SPEAKER

Listening to music

1. Press the button on your speaker, then connect to your Bluetooth device.
2. Begin playback on your Bluetooth device.
3. Adjust the volume on your speaker by pressing the + or – buttons.

Note: Use the controls on your Bluetooth device to control playback.

Taking a call

1. Press the button briefly to accept an incoming call. The LED lights blue and fades in and out.
   OR
   Press and hold the button to reject an incoming call. The LED blinks red once.

2. Press the button during a call to end the call. The LED blinks red once.

TROUBLESHOOTING

•Make sure that your speaker is turned on.
No sound or low volume| •Make sure that your Bluetooth device is turned on, Bluetooth is turned on, and “NS-CSPBT03” is selected.
•Turn up the volume on your speaker.
•Turn up the volume on your Bluetooth device.
•Make sure that your Bluetooth device is not muted.
•Make sure that your speaker is not paired to another Bluetooth device.
•Make sure that your Bluetooth device is not paired to another Bluetooth device.
Cannot establish Bluetooth connection| •Make sure your speaker is in pairing mode. If a connection has not been made in 30 seconds, the speaker exits pairing mode. Press and hold the6 button to reenter pairing mode.
•Shorten the distance between your speaker and your Bluetooth device.
•Turn your devices off, then on. Re-pair your speaker and your Bluetooth device.
•Make sure that your speaker is not paired to another Bluetooth device.
•Make sure that your speaker and Bluetooth device are both in pairing mode.
•Make sure that your Bluetooth device supports the Bluetooth v4.0 protocol and below.
•Make sure that your Bluetooth device is not connected to any other device.
•Make sure that you have selected”NS-CSPBT03″ on your Bluetooth device.
My Bluetooth device keeps unpairing| •Shorten the distance between your speaker and your Bluetooth device.
•If the battery on your Bluetooth device is low, recharge the battery.
•If the battery on your speaker is low, recharge the battery.
“NS-CSPBT03” does not appear on my Bluetooth
device| •Shorten the distance between your speaker and your Bluetooth device.
•Put your speaker into pairing mode, then refresh your list of Bluetooth devices. For more
information, see the documentation that came with your Bluetooth device.

LEGAL NOTICES

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maybe cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different form that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its affiliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>