HermanMiller 1BH75V Nelson Bubble Lotus Floor Lamp Instruction Manual

HermanMiller 1BH75V Nelson Bubble Lotus Floor Lamp

Product Information

Specifications:

• Product Name: HermanMiller Nelson Bubble Lotus Table Lamp/Nelson Bubble Lotus Floor Lamp
• Model Number: 1BH75V
• Parts Included:

1. Lamp Shade
2. Shade Support and Base and Mounting Screw

Product Usage Instructions

Step 1: Assembling the Lamp

No Tools Required

1. After installing a light bulb, lower the lamp shade over the support frame.
2. For Large and Medium Floor Lamps only: Slide the centering cleat up the lamp shaft with your free hand.

Step 2: Safety Instructions
Please remove the lamp from the bag before use.

This lamp has a polarized plug for safety. Ensure proper insertion into a polarized plug outlet. Contact a qualified electrician if needed.

Step 3: Final Assembly

1. For Large and Medium Floor Lamps only: Pivot the shade to the left while angling the centering cleat through the opening of the shade.
2. For Large and Medium Floor Lamps only: Pivot the shade to the right while angling the other half of the centering cleat through the shade opening.
3. For Large and Medium Floor Lamps only: Once the cleat is fully inside the shade, slide it down the shaft.
4. For Large and Medium Floor Lamps only: Ensure the cleat is securely centered on the rim of the lampshade to prevent rocking.
5. Fasten the lamp shade screw to the threaded hole located at the top of the lampshade support.

Step 4: Power On
Plug the power cord into an appropriate outlet and enjoy your Nelson Bubble Floor Lamp.

Frequently Asked Questions (FAQ):

• Q: Do I need any tools to assemble the lamp?
  A: No, assembly of the lamp does not require any tools.

• Q: How do I ensure the lamp is safe to use?
  A: Make sure to remove the lamp from its bag before use and follow the safety instructions provided, especially regarding the polarized plug.

Parts Included

• A. Lamp Shade
• B. Shade Support and Base and Mounting Screw

Important Safety Instructions

This lamp has a polarized plug, (one blade is wider than the other), as a feature to reduce the risk of electric shock. This plug will fit in a polarized plug outlet one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use an extension cord unless the plug can be fully inserted. Do not alter the plug.

How to assemble your lamp

Step 1: (Table lamb and Floor lamb steps are the same except where noted)

• After installing a light bulb, lower the lamp shade over the support frame.
• For Large and Medium Floor Lamps only:
  With your free hand, slide the centering cleat up the lamp shaft .

Step 2

For Large and Medium Floor Lamps only:
Pivot the shade to the left while you angle the centering cleat through the opening of the shade.

Step 3

For Large and Medium Floor Lamps only:
Pivot the shade to the right while you angle the other half of the centering cleat through the shade opening.

Step 4

For Large and Medium Floor Lamps only:
Once the cleat is fully inside the shade, slide it down the shaft.

Step 5

For Large and Medium Floor Lamps only:
The cleat should be securely centered on the rim of the lampshade, which prevents it from rocking.

Step 6
Fasten the lamp shade screw to the threaded hole located at the top of the lampshade support.

Step 6
Plug the power cord into an appropriate outlet and enjoy your Nelson Bubble Floor Lamp.

• For more information about the care and assembly of this product, please visit hermanmiller.com/care-and-assembly.
• HermanMiller and are among the registered trademarks of Herman Miller, Inc.
• Nelson is among the trademarks of Herman Miller, Inc.
• Printed in USA. Please recycle.
• © 2016 Herman Miller, Inc., Zeeland Michigan. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>