beTron TG30 Wireless Earbuds User Guide

beTron TG30 Wireless Earbuds

Product Information

The product is a device that complies with Part 15 of the FCC rules. It is designed to operate without causing harmful interference and can accept interference from other sources without affecting its operation. The product has a FCC ID of 2BBUX-TW30B.

Product Usage Instructions

1. To optimize reception, reorient the receiving antenna of the device.
2. If there is interference, try increasing the separation between the product and any other electronic equipment or receiver.
3. Ensure that the product is connected to an outlet on a different circuit than the one to which the receiver is connected.
4. If you require assistance, consult the dealer or seek help from an experienced radio/TV technician.
5. Do not make any changes or modifications to the product that are not expressly approved by the party responsible for compliance, as doing so could void your authority to operate the equipment.

CONTENTS

CHARGING

PAIRING

RESET

TOUCH CONTROLS

WARNING

• DO NOT use alcohol. paint thinners, detergent, shampoo, or other solvents for cicanne Durooses
• DO NOT intentionally immerse the earphones under water.
• DO NOT wash the earphones in washing machine.
• DO NOT expose the product to extremely high or low temperatures.
• DO NOT leave the product near candles, cooking burners and open flames.
• DO NOT disassemble the product in any way to avoid electric shock,
• Only charge the battery in accordance to the instructions provided by the company.
• DO NOT wash the charging box.

CAUTION

• RISK OF EXPLOSION INCREASES IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
• DISPOSE USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

INSTRUCTIONS

• DO NOT DISCARD THE USED BATTERES ALONG WITH HOUSEHOLD WASTE
• DISPOSAL OF BATTERY SHOULD COMPLY WITH LOCAL ENRONMENTAL REGULATIONS.

SPICIFICATION

• BT Version: V5.2
• Profile: HFP. A2DP. AVRCP
• Codec: SBC, AAC
• Range: 10 meters (33 feet)
• Charging time (Full charge): Approx. 1.5 hours
• Playtime: Up to 15 hours
• Standay times Do to 3 months
• Dimensions: 65W x 60H x 25L (mm)
• Weight: 43g

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:

• Reorient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into and outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
• FCC ID:2BBUX-TW30B

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>