COOLER MASTER GA241 23.8 Inch Gaming Monitor User Manual
- June 12, 2024
- COOLER MASTER
Table of Contents
COOLER MASTER GA241 23.8 Inch Gaming Monitor
Product Information
This product is a versatile and multi-functional device designed to provide various features and functions. It is equipped with advanced technology and is suitable for a wide range of applications. The product offers durability, reliability, and user-friendly operation.
Product Usage Instructions
- Before using the product, ensure that it is properly connected to a power source and any necessary peripherals.
- Refer to the user manual for specific instructions on setting up and configuring the product.
- To turn on the product, locate the power button and press it. The device will start up and display the main menu.
- Use the provided controls or interface to navigate through the menu options and select the desired feature or function.
- Follow the on-screen prompts or refer to the user manual for detailed instructions on using each feature or function.
- For additional assistance or troubleshooting, consult the troubleshooting section of the user manual or contact customer support.
- When finished using the product, properly shut it down according to the instructions provided in the user manual.
- Disconnect any peripherals and power off the device before storing or transporting it.
Requirements and Safety Notice FCC Safety Notice This product has been tested and determined to be meeting the limits for a Class B digital device and in compliance with Part 15 of the FCC Regulations. These requirements are set to reasonably protect the home installation environment from hazardous interference. This product will generate, use and emit radio frequency energy. Failure to install and use it as instructed may cause hazardous interference to radio communication. However, we cannot guarantee zero interference for certain installation methods. If this product has caused hazardous inteference to radio or TV reception (turn on or turn off this product to for confirmation), the user may try to make adjustment with the following methods:
- Re-adjust the angle and position of the reception antenna
- Increase the distance between the device and receiver.
- Do not use the power sockets of the device and receiver together.
- If assistance is needed, contact the distributor or a professional radio/TV technician. CE Compliance Statement Cooler Master Technology Inc. hereby declares that the monitor conforms to the following key standards and other related provisions: EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, RoHS Directive 2011/65/EU and Directive 2009/125/C establishing a framework for the setting of eco-design requirements for energy-related products. Note: To prevent damage of the monitor, do not lift the monitor from the support base.
Note: Shielded cable To comply with the MC requirements, a shielded cable must be used for connection between this product and any other computer device. Note: The monitor is exclusively used in the video and image display of information acquired from electronic devices.
Note: Peripherals Only a peripheral device (I/O device, terminal, printer, etc.) that has been certified and met the Class B limits can be sold together with this product. If this product is used together with any other uncertified peripheral device, it may cause interference to radio and TV reception.
Warning Any change or modification not approved by the original manufacturer may lead to the user losing the right to operate this product. Such authorization is given by the Federal Communications Commission. Requirements for Use This product meets the limits under Part 15 of the FCC Regulations.
When operating this product, please meet the following two requirements:
- This product may not generate hazardous interference; and
- This product must accept any interference signal received, including interference that is likely to lead to unexpected operation.
The following local Manufacturer/Importer is responsible for this declaration.
- Product Name:LCD Monitor
- Model No:GA241
- Company Name:North America
- CMI USA, Inc.
- Address: 1 N Indian Hill Blvd Suite 200, Claremont, CA 91711, USA
- Contact Person: Cooler Master Representative
- Phone No: +1-888-624-5099
Note: Canadian users This Class B digital device complies with Canadian ICES-003 specifications.
Canada Disposal of Waste Equipment by Home Users in EU If this symbol appears on a product and its package, it indicates that the product cannot be disposed of together with other household waste. You have to deliver the waste equipment to a designated recycling center for recycling of waste electrical and electronic equipment. Proper sorting and recycling of resources during the disposal of waste equipment is helpful for protecting natural resources and ensuring that resource recycling can protect human health and environment. For detailed information about recycling centers where waste equipment is disposed of, contact the local municipal office, cleaning service or the store where the purchased product is found.
Following these instructions will ensure optimal performance and longevity of the product. It is important to read and understand the complete user manual before using the product to ensure safe and proper usage.
Important Safety Instructions
Please read the following instructions carefully.
- To clean the LCD monitor screen: Turn off the LCD monitor and unplug the power cord. Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
- Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
- Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
- Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature
- Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to 140° F). Storing the LCD monitor outside this range may result in permanent damage.
- Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
- Monitor to PC signal cable is frayed or damaged.
- Liquid spills onto the LCD monitor or the monitor is exposed to rain.
- The LCD monitor or case is damaged.
Package Contents
Installing the Monitor Arm/Base
Adjusting the Monitor
- For the best results, it is recommended to look directly at the front of the monitor and make any adjusts as necessary.
- Ensure that the monitor is mounted upright on the stand base.
- When adjusting the monitor viewing angles, avoid touching the screen and hold the stand in order to prevent it from falling over.
Wall Mount Installation Instructions
External Control Buttons
- Menu/Navi/Ok button
Short press to turn on the monitor and Long press to turn off.
When the OSD menu is activated ,pull up/down/left/right the button to adjust
the settings you need. When finished, you can pull the Button Back to return
to the previous level or use the Button Exit to close the OSD menu.
NOTE: Power light; Blue = ON; Orange = Power Saving.
Main Menu
(Picture)
Enter the Picture menu to configure image setting.- Picture Mode: Enter the Picture Setting menu to adjust different picture modes.
- a. Act: Provide the optimized setting for Act(Action) games.
- b. FPS: Provide the optimized setting for FPS(First Person Shooting) games to increase the visibility in dark scenes.
- c. RTS: Provide the optimized setting for RTS(Real-Time Strategy) games.
- d. User: Provide customized option for user experience.
- e. Standard: Enable standard picture mode.
- f. Web: Provide the optimized setting for website browsing experience.
- g. Text: Provide the optimized setting for reading (Native color space: sRGB).
- h. Movie: Provide the optimized setting for movie watching experience.
- Brightness: Adjust the backlight brightness level between 0 and 100.
- Contrast: Adjust the Contrast level between 0 and 100.
- Black Stabilization: Adjust the backlight brightness level between 0 and 100.
- Blue Light Filter: Adjust the Contrast level between 0 and 100.
- Advanced DCR: Turn the Advanced DCR function On or Off.
- Auto Config: Automatic adjustment screen.
- H. Position: Adjust the horizontal position between 0 to 100.
- V. Position: Adjust the vertical position between 0 to 100.
- Focus: Adjust the Focus between 0 and 100.
- Clock: Adjust the Clock between 0 and 100.
(Color)
- Enter the Color menu to adjust the ideal color mode.
- Gamma: Adjust gamma curve between 1.8, 2.2 and 2.4.
- Color Temperature: Adjust between Bluish, Cool, Native, Warm and User Color settings which can adjust Red, Green and Blue value from 0 to 100.
[Audio]
- Enter the Audio menu to adjust functions including Mute and Volume functions etc.
- Volume: Adjust the volume value between 0 and 100.
- Mute: Enable or disable the mute function.
*Adjust volume value level properly to avoid damaging hearing.
[Gaming]
- Go to the Gaming menu to adjust the desired Gaming mode. Over Drive: Off, Normal, Advanced modes are available options for speeding up the response time.
- Adaptive-Sync: Turn the Adaptive-Sync function On or Off.
*Enabling Adaptive-Sync may cause side effects like flicker due to the fluctuation of the output frequency from graphics cards. - Motion Clearness: MPRT setting with: Off or On as available options.
- FPS Counter: Turn the FPS Counter function On or Off.
- Crosshair: Off, Icon1, Icon2, Icon3 are available options turn the Crosshair position off or adjust it.
OSD
- Language: English, Russian, German, French, Spanish, Italian, Finnish, Traditional Chinese, Simplified Chinese Japanese, Korean are available options.
- OSD Timeout: Adjust the OSD Timeout setting value between 10 and 120.
- OSD Background: Turn the OSD Background setting value between Off, 20%, 40%, 60% and 80%.
[System]
- Input Select: Select the source from an available input source, including VGA and HDMI.
- Auto Source: Automatically searches for available input sources.
- Aspect Ratio: Full Screen and Aspect Screen mode can be selected.
- DDC/CI: Turn the DDC/CI function On or Off.
- Quick Start Mode: Turn the Quick Start Mode function On or Off.
Information
Information: View the basic information of the model including Main Source, Resolution, H/ Frequency, Mode and Series Number setting.- Memory Recall: Restore the Settings back to default values.
Specifications
Compliance
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.
*Specifications are subject to change without notice.
**Measure a screen brightness of 200 nits without audio/USB/Card reader connection. If you have any question regarding use of the monitor, please visit: https://www.coolermaster.com/warranty
Supported Timing
PC Timing
[Video Timing)
Product Outline Dimensions
Documents / Resources
|
COOLER MASTER GA241 23.8 Inch Gaming
Monitor
[pdf] User Manual
GA241 23.8 Inch Gaming Monitor, GA241, 23.8 Inch Gaming Monitor, Gaming
Monitor, Monitor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>