SHARPER IMAGE 208897 Mini Fire Pit Instructions

: June 12, 2024
: Sharper Image

Table of Contents

READ ALL CAUTIONS AND INSTRUCTIONS BEFORE USING YOUR FIRE PIT
Customer Support
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SHARPER IMAGE 208897 Mini Fire Pit

SHARPER IMAGE 208897 Mini Fire Pit

READ ALL CAUTIONS AND INSTRUCTIONS BEFORE USING YOUR FIRE PIT

CAUTION: BEFORE LIGHTING ANY FIRE, CHECK WITH THE LOCAL AREA FOR ANY FIRE BANS OR RESTRICTIONS.

Never leave a fire unattended.
Keep out of reach of children & pets.
Always use the fire pit legs.
Do not use gasoline, lighter fluid, or other flammable liquid.
Do not touch fire pit while in use – wait until completely cool.
Do not touch embers or ash until completely cool.
Do not lean objects against fire pit.
For outdoor use only – do not use indoors or under any form of cover.
Do not use as an indoor heating source.
Do not use on a boat or in a recreational vehicle.
For use on a non-combustible surface only – it is not recommended to use on wood or composite surface.
Not recommended for use on grass or lawn surfaces without a stand underneath.
Keep away from gasoline or any flammable substance.
Always use in compliance with any state or national codes/laws and fire regulations.
Do not use near any bushes, shrubs, or hanging tree branches.
Maintain a minimum of 2-meter clearance from any plants, wooden fences, or ceilings. Use caution when leaning over fire pit.
Always keep fire pit covered when not in use. Do not use if damaged or broken.
For best results do not overfill with wood above top air vent holes.
Do not use water to extinguish the fire.

READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO USE

Unfold the stand legs on the bottom of the fire pit.
Place the stand on a level surface. Make sure you are always using the stand whenever you light the fire pit to reduce risk of damage to your surfaces.
Use the fire pit with wood, sticks, kindling, or pellets.
If you’re using pellets, always use the pellet chimney for ventilation.

BURNING WOOD:

Place your fire starter on the removeable grate.
Using a torch or stick lighter – – ignite the fire starter.
Slowly add wood, sticks and kindling.
As the fire begins to burn, add more until full.
Continue to add wood and sticks for as long as fire is desired.
DO NOT stack wood higher than the inner vent holes, which can cause the ventilation to be blocked.

BURNING PELLETS:

Place the Pellet chimney on the center of the removeable grate.
Place your fire starter around and inside the center of the pellet chimney.
Using a torch or stick lighter – – ignite the fire starter. Add pellets to the burn chamber, pouring them around the edges of the pellet adapter. Continue to add pellets for as long as fire is desired.
DO NOT add pellets higher than the inner vent holes, which can cause the ventilation to be blocked.
DO NOT add pellets too quickly, as they can reduce airflow and cause the fire to be extinguished.

Manufactured and distributed by SAS Group, Inc. under license from Duraflame, Inc.
duraflame, the flame symbol and logo are trademarks of Duraflame, Inc. Visit our website at www.buyduraflamefirepit.com

**** The emissions from burning in this product, like other fire-based products, can expose you to chemicals including carbon monoxide, soot, smoke and other combustion by-products, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Use of this and other solid fuels may be restricted at times by law. Please check (1-877-4NO-BURN) or (www.8774noburn.org) before burning. This product is intended for outdoor use only. Use in well ventilated areas.

Customer Support

Distributed by:

SAS Group, Inc.
Tarrytown, NY 10591
Item # DFMFP © 2023 SAS Group, Inc. MADE IN CHINA
For customer service call SAS Group, Inc. at 1-866-599-1112 or **email atcustomerservice@buyduraflamefirepit.com**

SCAN QR CODE TOVISIT OUR WEBSITE