Sealey MK63 Masking Paper Dispenser Instructions

Sealey MK63 Masking Paper Dispenser

Product Information The Sealey Masking Paper Dispenser Tree, Model No: MK63, is a high-quality product designed to provide years of trouble-free performance. This dispenser is capable of holding and dispensing up to four rolls of masking paper, with two rolls measuring 300mm and two rolls measuring 450mm. It features a wide base for added stability and automatically applies adhesive tape to the edges of the masking paper. Please note that the papers and tapes are not included with the dispenser.

Assembly of the dispenser is required, and the package includes various parts such as the main frame, wheel frame, bottom frame, support assemblies, cutting blades, wheel assembly, paper roll assembly, cutting blade assembly, and tape reel assembly. Detailed instructions on how to assemble these parts can be found in the instruction manual.

It is important to prioritize safety when using this product. Ensure that the dispenser is placed on a flat and level floor before loading. Tighten and secure all fittings to prevent any accidents. Take caution when handling the sharp paper cutting blades. It is crucial to use the dispenser only for its intended purpose to avoid any damage or personal injury.

The Sealey Masking Paper Dispenser Tree is an environmentally friendly product. When disposing of unwanted materials, please recycle them instead of throwing them away as waste. Sort alltools, accessories, and packaging and take them to a recycling center. Follow local regulations for proper disposal of the product and any fluids it may contain.

The warranty for this product is valid for 12 months from the
date of purchase. To register your purchase and make any warranty claims, please visit the Sealey website or contact their customer service.

Product Usage Instructions

1. Ensure that the dispenser is placed on a flat and level floor before starting to use it.
2. Tighten and secure all fittings to ensure the stability of the dispenser
3. Handle the paper cutting blades with care as they are sharp.
4. Only use the dispenser for its intended purpose and avoid using it for any other tasks.
5. To load the dispenser, follow the assembly instructions provided in the manual.
6. Insert two rolls of masking paper measuring 300mm each into the designated slots.
7. Insert two rolls of masking paper measuring 450mm each into the designated slots.
8. Ensure that the paper rolls are properly aligned and positioned within the dispenser.
9. Make sure that the adhesive tape is loaded onto the tape reel assembly.
10. When using the dispenser, pull out the desired length of masking paper from the rolls
11. The dispenser will automatically apply adhesive tape to the edges of the masking paper as it is pulled out.
12. Continue pulling out the desired length of masking paper, ensuring that the adhesive tape is properly applied.

Please note that papers and tapes are not included with the dispenser and need to be purchased separately.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

SAFETY

• Ensure the dispenser is on a reasonably flat, level floor before loading.
• Ensure that all fittings are tight and secure.
• Be aware that the paper cutting blades are sharp, handle with care.
• DO NOT use the dispenser for any purpose other than that for which it is designed.

INTRODUCTION

Four roll dispenser accepts two rolls up to 300mm and two rolls up to 450mm. Easy to load paper rolls and masking tape. Wide base for added stability. Automatically applies adhesive tape to edges of masking paper. Papers and tapes not included.

• Model No:……………………………………………………MK63
• Capacity:………… 2 x 300mm & 2 x 450mm Paper Rolls

ASSEMBLY

Assemble parts as per fig.1.

ENVIRONMENT PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids accordin to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
W arranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.

Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>