SPORTNOW A61-035V00 Adjustable Basketball Hoop and Baseball Stand Instruction Manual
- June 12, 2024
- SPORTNOW
Table of Contents
SPORTNOW A61-035V00 Adjustable Basketball Hoop and Baseball Stand
Instruction Manual
IN220800648V01_UK_ES
A61-035V00_A61-037V01_A61-037V00
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
ASSEMBLY INSTRUCTION
Dear customer,
Thank you for purchasing this product. So that your appliance serves you well,
please read all the instructions in this user’s manual. If you have any
questions, please contact our customer care center.
Our contact details are below:
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27. Perivale Park,
Horsenden lane South
Perivale. UB6 7RH
MADE IN CHINA
SAFETY INSTRUCTIONS
To ensure safety, do not assemble this product without following all instructions. Check all packaging, ensuring all parts are present and not damaged. A high risk of serious injury can occur if this appliance is not installed, maintained and used properly.
-
The equipment should be moved by at least three adults, who are capable of handling its weight. Children should not move this appliance .
-
Check the base regularly (if possible) for leakages. Slow leaks can cause the product to tip over.
-
Stand in front of the product and pull the pole forward, so it is balanced on its wheels.
-
Move the appliance to the desired location and carefully set the base down.
Warning
- Do not hang on the rim or any parts of the product, including backboard, support braces and net.
- Do not use if parts are damaged. If there are any issues with parts, please contact customer service.
- Do not leave the system in an upright position without filling the base with water, as it could tip over and cause injury.
- Do not fill the base with water in freezing temperatures, as the water could freeze and cause damage. Instead, use sand to fill the base.
- Keep top pole and lifter pole covered with the cap at all times.
- When playing, do not wear jewellery – it could get tangled or damaged.
- When adjusting height or moving the product, keep hands away from moving parts.
- Do not allow children to move or adjust the product.
Product moving
- Adjust the product to its lowest level before moving
- Avoid friction with the ground while moving.
- Rise the product slowly.
Installation Details
Step 1: Assembly wheelshaft, wheel and bottom tube
Insert the wheel shaft(M) into the front holes of the base(P), also insert the
left wheel(I), bottom tube(J) and right wheel(I) in turn as shown.
Step 2: Assembly Base
Fix one end of the 2 support braces (H) on the base by screws (F), then fix
another end of the 2 support braces() on the bottom tube (J) by screw (E) as
shown. Finally filling the base with water or sand to keep steady.
Step 3:Assembly of the rim,backboard and top tube
Assemble the rim (N),backboard (O) and top tube (L ) by screws (B) as shown.
Step 4: Assembly of backboard braces
Fix one end of the backboard braces(G) on top tube( L) by screw(D), then fix
another end of the backboard braces (G) on backboard by screw (C) as shown.
Step 5: Assembly of top tube and middle tube
Insert the top tube( L) into the middle tube(K) .The height is adjustable as
per requirement .Lock the tubes by the knob (A), (D) as shown.
Notice: the adjustment range is from 2.1m–2.6m
Step 6: Assembly of middle tube and bottom tube
Insert the middle tube(K) into the bottom tube (J) ,use the plastic head
knob(E) to lock them as shown.
Install net on Rim(N) as shown
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>