SPORTNOW A61-036V01 Basketball Hoop with Backboard Instruction Manual
- June 12, 2024
- SPORTNOW
Table of Contents
SPORTNOW A61-036V01 Basketball Hoop with Backboard
Product Information
The product is a basketball hoop system designed for outdoor use. It consists of a base, poles, brackets, backboard, rim, and net. The system can be filled with either sand or water to provide stability.
Product Usage Instructions
Safety Precautions:
- Do not assemble the product without following the instructions.
- Check all packaging to ensure no missing or damaged parts.
- Do not move the product without at least three adults present.
- Regularly check the base for leakages, as slow leaks can cause the product to tip over.
- Stand in front of the product and pull the pole forward to balance it on its wheels.
Assembly Steps
- Insert pole X,Y into Steel Cap O as shown in the picture on the right.
- Insert pole X into Y as shown in the picture on the left.
- Connect pole X and Y using bolt F, as shown in the left picture.
- Connect braces U1, U2, U3, and U4 to the base using bolt D. Connect braces U3 and U4 to steel cap O, and U1 and U2 to bottom pole Y using bolt F.
- Connect rim J, backboard M, and bracket K using bolts B1 and B4. Note that the longer B4 is at the top and shorter B1 is at the bottom.
- Connect bracket K to backboard M using bolts C1 and C2.
- Connect backboard M and bracket K using bolt F.
- Insert top pole W into middle pole X using bolt F.
- Assemble the net as shown in the picture on the right.
Base Filling:
If the product does not need to be moved frequently, it is recommended to
fill the base with sand instead of water. Water can freeze and damage the
base. Please note that once sand is placed in the base, it cannot be poured
out.
WARNING:
IMPROPER INSTALLATION OR SWINGING ON THE RING MAY CAUSE SERIOUS INJURY OR
DEATH
Notice to assemblers:
- All basketball stands, including those for display, must be assembled according to instructions. Failure to follow instructions could result in serious injury.
- Please read all warnings and cautions before assembly. It is recommended to supervise children as they play with this product. Assemble this product with at least two adults.
SAFETY INSTRUCTIONS
For safety, do not assemble without following instructions. Check all
packaging before assembling, ensuring parts are not missing or damaged.
- This product should be moved by at least three adults. Not to be moved by chil-dren.
- Check the base (if applicable) regularly for leakages. Slow leaks can cause the product to tip over.
- Stand in front of the product and pull the pole forward, so it is balanced on its wheels.
- Move the product to the desired location and carefully set the base down.
WARNING
- Do not hang on the rim or any parts of the product, including backboard , support braces or net.
- Never play on damaged equipment. If there any damages to parts, please contact customer service.
- Do not leave the product in an upright posilion without filling base with water or sand, as it may tip over and cause injury or damage.
- Do not let water freeze in the base during extremely cold weather. Pour out the water and fill with sand.
- Always keep top pole and lifter pole covered with a cap.
- When playing, do not wear jewellery, as it could get damaged.
- When adjusting height or moving the stand, keep hands a way from moving parts.
- Do not let children move or adjust the stand.
If you have any questions, please contact our customer care center.
Our contact details are below:
IMPORTER ADDRESS:
MH STAR UK LTD
Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH
MADE IN CHINA
PART LIST
Insert pole X to Y, as shown in the picture on the left.
Insert pole X,Y to Steel Cap O, as shown in the picture on the right.
Connect rim J, backboard M and bracket
K, using bolts B1 and B4. Please note, the longer B4 is at the top and shorter
B1 is at the bottom.
Connect bracket K to backboard M, using bolts C1 and C2.
Connect backboard M and bracket K, using bolt F.
Assemble the net, as shown in the
picture on the right.
If the product does not need to be
moved frequently, it is recommended to use sand in the base instead of water.
Water could freeze, which damages the base. Please note, sand cannot be poured
out after it is placed in the base.