STI-9705 Strobe Wire Guard Instruction Manual

STI-9705 Strobe Wire Guard

Product Information

• Product Name: Miscellaneous Wire
• Cages – Model Numbers: STI-9705, STI-9708, STI-9711, STI-9714, STI-9717, STI-9720, STI-9729, STI-9730
• Dimensions (approximate)
  • STI-9705: 7.4 in. x 6.15 in. x 3.39 in.
  • STI-9708: 7.49 in. x 6.74 in. x 6.09 in.
  • STI-9711: 8.26 in. x 8.26 in. x 3.54 in.
  • STI-9714: 8.55 in. x 8.55 in. x 6.23 in.
  • STI-9717: 6.1 in. x 9.3 in. x 2.4 in.
  • STI-9720: 6.1 in. x 9.3 in. x 4.9 in.
  • STI-9729: 7 in. x 7 in. x 7 in.
  • STI-9730: 12 in. x 12 in. x 12 in.

Product Usage Instructions

1. Installation Instructions:
   • Center the wire guard over the strobe.
   • Place the clamps in the recommended position as shown.
   • Mark the clamp hole locations on the wall and drill (4) 5/32 diameter holes, 1 1/2 inches deep. If using an anchor, drill (4) 11/32 diameter holes, 1-1/2 inches deep.
   • Insert the anchors and/or screws and tighten.
2. When Using Mounting Plate:
   • Attach the speaker/strobe mounting plate through the holes in the backplate and secure the (2) #6-32 screws to the 4.0 square electrical box. The backplate must be oriented as shown to mount correctly.
   • Attach all wires to the speaker/strobe mounting plate per installation instructions.
   • Attach the speaker/strobe unit to the speaker/strobe mounting plate per instructions.
   • Attach the wire guard to the backplate using the (4) clamps and screws.
3. Additional Wire Guards:
4. Visit www.sti-usa.com/w1 for complete details on additional wire guards available.

Note: All specifications and information shown were current as of publication and are subject to change without notice. For warranty information, refer to the website
www.sti-usa.com/wc14.

INSTALLATION INSTRUCTIONS

1. Center wire guard over strobe.
2. Place clamps in recommended position as shown.
3. Mark clamp hole locations on wall and drill (4) 5/32 diameter holes 1 1/2 in. deep. If using anchor, drill (4) 11/32 diameter holes 1-1/2 in. deep. 4. Insert anchors and/or screws and tighten.
   

WHEN USING MOUNTING PLATE

1. Attach speaker/strobe mounting plate through holes in backplate and secure the (2) #6-32 screws to the 4.0 square electrical box. Backplate must be orientated as shown to mount correctly.
2. Attach all wires to speaker/strobe mounting plate per installation instructions.
3. Attach speaker/strobe unit to speaker/strobe mounting plate per instructions.
4. Attach wire guard to backplate using the (4) clamps and screws.
   

LIGHT DE-RATING FACTOR

• System Sensor(SR,SW,SW-ALERT,SW-CLR-ALERT,SR K,SWK,P2R,P2W,P4R,P4W,CHSR,CHSW,P2RK,P2WK ,P4RK,P4WK,SPSR,SPSR-SP,SPSR-PG,SPSW,SPSW-CLR-
• ALERT,SPSW-SP,SPSW-PG,SPSRV,SPSRV- SP,SPSRV-PG,SPSWV,SPSWV-SP and SPSWV- PG,SPSWK,SPSRK,SPSW-ALERT)
• System Sensor (SRH,SWH,SRHK,SWH-ALERT,SWHK,P2RH ,P2WH,P4RH,P2RHK,P2WHK,P2RHK-120, SPSRH,SPSRH-SP,SPSRH-PG,SPSWH,SPSWH-SP and SPSWH- PG,SPSRHK)
  

Light Loss % 13.0%

• Three year warranty or a one year limited warranty (from date of purchase) on most products. See website for details.
• Electronic warranty form at www.sti-usa.com/wc14.

ADDITIONAL WIRE GUARDS AVAILABLE

Visit www.sti-usa.com/w1 for complete details All dimensions are approximate

SMOKE DETECTOR GUARDS

• STI-9601 8.25 x 2.75”
• STI-9601-SS 8.25 x 2.75”
• STI-9602 8.25 x 4.25”
• STI-9604 7 x 3.25”
• STI-9604-SS 7 x 3.25”
• STI-9605 7.125 x 4.5”
• STI-9605-SS 7.125 x 4.5”
• STI-9609 8.25 x 4.6”
• STI-9609-SS 8.25 x 4.6”
• STI-9610 8.25 x 6”
• STI-9712 6.87 x 4.53”
• STI-9713 6.87 x 2.50”

PIR GUARDS

• STI-9618 4.62 x 5.37 x 3”
• STI-9619 7.75 x 5.37 x 5.62”
• STI-9620 6.25 x 4 x 2.25”
• STI-9621 7 x 5.75 x 4.50”
• STI-9622 8.75 x 4 x 3.75”
  

EXIT SIGN WIRE CAGES

• STI-9640 10.5 x 13.75 x 2.75”
• STI-9740 15.5 x 20.5 x 6”
• STI-9742 15.59 x 16.09 x 3.30”
  

EMERGENCY LIGHT CAGES

• STI-9641 19.7 x 14.6 x 4”
• STI-9644 8.7 x 17.7 x 5”
• STI-9645 13.8 x 21.7 x 5.9”
• STI-9649 10.75 x 24.75 x 11.25”
• STI-9703 5 x 13.5 x 4”
  

BEAM SMOKE DETECTORS

• STI-9623 7.75 x 6 x 6”
• STI-9624 8.875 x 5.5 x 4.75”
• STI-9706 10.82 x 9.32 x 4”
• STI-9707 11 x 9.62 x 5.5”
• STI-9840 6.61 x 5.78”
• STI-9841 11.52 x 10 x 3.58”
• STI-9845 6.7 x 9.2 x 4.07”
• STI-9846 7.6 x 11.6 x 5.6”

CLOCK/BELL WIRE CAGES

• STI-9631-R 10.5” Diameter – Red
• STI-9635 14.25” Diameter
• STI-9636 20.75” Diameter
• STI-9637 26.75” Diameter

BEACON & SOUNDER CAGES

• STI-9614 7.9 x 6”
• STI-9615 3.7 x 3.5”
• STI-9617 5.9 x 4.9”
• STI-9664 3.86 x 6.18”
• STI-9665 7 x 8.43”
• STI-9750 9.6 x 2.8”
• STI-9754 8.4 x 9.2 x 3.5”
• STI-9760 8.5 x 3.2”
• STI-9761 8.5 x 5.7”
• STI-9762 6.2 x 4.75 x 2.5”
• STI-9763 6.2 x 4.75 x 4”
• STI-9764 6.6 x 6 x 2.5”
• STI-9765 6.6 x 6 x 4.4”
• STI-9766 8.2 x 6.75 x 2.9”
• STI-9767 8.2 x 6.75 x 5”
  

MISCELLANEOUS WIRE CAGESBEAM

• STI-9705 7.4 x 6.15 x 3.39”
• STI-9708 7.49 x 6.74 x 6.09”
• STI-9711 8.26 x 8.26 x 3.54”
• STI-9714 8.55 x 8.55 x 6.23”
• STI-9717 6.1 x 9.3 x 2.4”
• STI-9720 6.1 x 9.3 x 4.9”
• STI-9729 7 x 7 x 7”
• STI-9730 12 x 12 x 12”
• STI-9731 12 x 12 x 8”
• STI-9732 18 x 15 x 13”
• STI-9880 10.45 x 62.75 x 6.2”
• STI-9881 10.45 x 98.25 x 6.2”
• STI-101075 10 x 10 x (63 to 75)”
• STI-241416 33.25 x 23.29 x 16”
• STI-282121 39.06 x 32.01 x 21.29”

USA

Documents / Resources

| STI STI-9705 Strobe Wire Guard [pdf] Instruction Manual
STI-9705, STI-9708, STI-9705 Strobe Wire Guard, Strobe Wire Guard, Wire Guard
---|---

References

• Home - STI EMEA
• Security & Safety Device Protection | Safety Technology International
• Protective Cages & Wire Guard Shields for Smoke Detectors & Other Alarms
• Warranty & Returns - STI US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>