STI-BPF 120-15 ASTM E2307 Perimeter Fire Containment Systems

“`html

Product Information

Specifications

• Product Name: ASTM E2307 Perimeter Fire Containment System
• Manufacturer: Specified Technologies Inc.
• Available Solutions: STI/BPF 120-15, STI/BPF 120-19
• Insulation Type: Foil Faced CW Insulation

Product Usage Instructions

Installation Process

1. Prepare the installation area by ensuring it is clean and free
   from debris.

2. Follow the specific guidelines provided by the manufacturer for
   installing the perimeter fire containment system.

3. If using shop installed insulation, carefully position and
   secure the insulation in place according to the manufacturer’s
   instructions.

4. For field installed insulation, ensure proper alignment and
   secure attachment to the structure.

5. Complete the installation by verifying all components are
   correctly in place and secure.

Maintenance and Care

Regularly inspect the perimeter fire containment system for any
signs of damage or wear. If any issues are detected, contact the
manufacturer or a certified technician for repair or
replacement.

Emergency Procedures

In case of a fire emergency, follow established safety
protocols. The perimeter fire containment system is designed to
help contain fire, but additional safety measures should be
followed as per building regulations.

FAQ

Q: How do I know which solution is suitable for my

project?

A: Contact one of our Curtain Wall Specialists listed in the
user manual to discuss your project requirements and receive expert
guidance on selecting the appropriate solution.

Q: Can I install the perimeter fire containment system

myself?

A: Installation of the system should be done by trained
professionals familiar with fire containment systems to ensure
proper installation and effectiveness during emergencies.

Q: What should I do if I notice damage to the insulation?

A: Immediately contact the manufacturer or a certified
technician to assess the damage and determine if repair or
replacement is necessary to maintain the system’s integrity.

“`

The most advanced ASTM E2307 perimeter fire containment systems available today, period.

Specified Technologies Inc. is proud to introduce the most advanced solutions for true glazing systems incorporating shop installed or field installed foil faced CW Insulation! Published design listing advantages include:
STI/BPF 120-15
· Unmatched shop & field installed “zero spandrel” or fully insulated assemblies
· Maximum 80.5″ OC mullion! · Underside of upper transom flush to maximum 5.5″
above top of slab with NO STIFFENER REQUIRED! · Two-piece glazing system incorporating STACK JOINT! · Structural silicone (SSG) or pressure plate gasket · Min 3″ 8 pcf ROCKWOOL CURTAINROCK 80
foil faced Spandrel Insulation · One Vertical Seam allowed in spandrel
insulation, no metal support! · Alternative insulation materials allowed
in “thermal area” · MP 100 mullion plug protection for internal;
spread of flame/smoke/sound · Advanced anchor protection · Any exterior cladding allowed per code

STI/BPF 120-19
· All advantages of STI/BPF120-15
· Maximum 60″ OC mullion spacing!
· Underside of Transom minimum flush to maximum 12″ above top of slab with NO STIFFENER REQUIRED!

Contact Our Curtain Wall Specialists To Learn More!

Scan to try our Design Assist Services

Eric LaCroix
Director Strategic Accounts, North America
704-236-7047 elacroix@stifirestop.com

Aaron Alterman
Consultant Support Specialist, North America
504-252-2692 aalterman@stifirestop.com

Michael Zanotelli
Western US & Canada Facades Specialist
310-433-5398 mzanotelli@stifirestop.com

Chris Perkins
Eastern US & Canada Facades Specialist
703-789-0744 cperkins@stifirestop.com

Dan Hall
Central US & Canada Facades Specialist
612-419-6518 dhall@stifirestop.com

Firestop, Smoke, & Sound Solutions
1 800-992-1180 stifirestop.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>