HYPERX Cloud III Gaming Headset User Guide
- June 12, 2024
- HYPERX
Table of Contents
Cloud III Gaming Headset
User Guide
Quick Start Guide
HyperX Cloud III
Gaming Headset
44X0019A
Cloud III Gaming Headset
Overview
A Mic mute button
B Microphone port| C Volume wheel
D Detachable microphone| E Microphone mute LED
F USB dongle| G USB-C to USB-A adapter
---|---|---|---
Usage
Setting up with PC
Right click speaker icon > Select Open Sound settings > Select Sound control
panel
Playback Device
Set Default Device to “HyperX Cloud III”
Mic Mute Button
Press button to turn the mic mute on/off
- LED On: Mic muted
- LED Off: Mic active
Recording Device
Set Default Device to “HyperX Cloud III”
Volume Wheel
Scroll up or down to adjust volume level
WARNING: Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
HyperX NGENUITY Software
Go to hyperx.com/ngenuity to download the NGENUITY software. NGENUITY software
features include:
- DTS Headphone:X
- Adjustable EQ settings
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at
hyperx.com/support
DTS, DTS:X, DTS Sound Unbound, Headphone:X, the DTS logo, and the DTS:X logo
are registered trademarks or trademarks of DTS, Inc. in the United States and
other countries. © 2020 DTS, Inc. ALL RIGHTS RESERVED.
Overview
A – Mic mute button
B – Microphone port
C – Volume wheel
D – Detachable microphone
E – Microphone mute LED
F – USB dongle
G – USB-C to USB-A adapter
Usage
Setting up with PC
Right click speaker icon > Select Open Sound settings > Select Sound control
panel
Playback Device
Set Default Device to “HyperX Cloud III”
Recording Device
Set Default Device to “HyperX Cloud III”
Mic Mute Button
Press button to turn the mic mute on/off
- LED On: Mic muted
- LED Off: Mic active
Volume Wheel
Scroll up or down to adjust volume level
WARNING: Permanent hearing damage can occur if a headset is used at high
volumes for extended periods of time.
HyperX NGENUITY Software
Go to hyperx.com/ngenuity to download the
NGENUITY software. NGENUITY software features include:
- DTS Headphone:X
- Adjustable EQ settings
Questions or Setup Issues?
Contact the HyperX support team or see the user manual at
hyperx.com/support
Rating
5V/100mA (USB dongle)
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC Caution : Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
Canada Notices
This Class B digital apparatus complies with Canadian ICES-003.
Avis Canadian
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Industry Canada statement
This device complies with
ISED ’s licence exempt Russ’s. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
©Copyright 2023 HyperX and the HyperX logo are registered
trademarks or trademarks of HP Inc. in the U.S. and/or other countries.
All registered trademarks and trademarks are
property of their respective owners.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>