SCARLETT SC-JE50S19 Juice Extractor Instruction Manual

June 12, 2024
SCARLETT

SCARLETT SC-JE50S19 Juice Extractor

Product Information

Description

The SC-JE50S19 is a juice extractor designed for domestic use. It has a transparent lid, a motor unit, a pulp container, a speed switch a fixator, and a juice outlet with an anti-drip nozzle. The appliance also includes a juice cup, a stainless steel mesh filter, and a cleaning brush.

Specifications

  • Nominal Power: 350 W
  • Max. Power: 800 W
  • Voltage: 220-240 V ~ 50 Hz
  • Weight: 2.14/2.54 kg
  • Dimensions: 275 mm x 160 mm x 250 mm

Product Usage Instructions
Important Safeguards

  • Read the operating instructions carefully before connecting the device to the power supply.
  • Ensure that the voltage indicated on the rating label matches the main voltage in your house.
  • Do not use the appliance outdoors or in damp areas.
  • The appliance is intended for domestic use only and should not be used in industrial or commercial settings.
  • Do not disassemble the juice extractor while it is plugged into the power supply.
  • Unplug the appliance before cleaning and when not in use.
  • Do not immerse the appliance in water or any other liquids. If this happens, unplug it immediately and contact a service center.
  • The appliance is not intended for use by physically, sensory, or mentally disabled individuals, including children.

Assembly and Dismantling
To assemble the juice extractor:

  1. Unplug the appliance from the power supply.
  2. Open the locks.
  3. Remove the transparent lid, pull the grating filter upwards, then take off the separating unit. Hold it by the beak from below and by the underside of the top of the unit on the other side.
  4. Place the separating unit on the motor unit and push with both hands until it clicks into place. Ensure that it is securely fastened, as the appliance will not function otherwise.
  5. Turn the anti-drop nozzle with the hole facing down.

Note: The position of the anti-drop nozzle with the opening up is used to prevent residual juice drops from falling.

SCARLETT-SC-JE50S19-Juice-Extractor-FIG-1

DESCRIPTION

SCARLETT-SC-JE50S19-Juice-Extractor-FIG-2

  1. Pusher
  2. Transparent lid
  3. Upper body
  4. Pulp container
  5. Switch button
  6. Lock
  7. Motor unit
  8. Juice spout with «anti-drip»
  9. feeder tube
  10. Juice jug
  11. Stainless steel strainer
  12.  Filter cleaning brush

INSTRUCTION MANUAL IMPORTANT SAFEGUARDS

  • Please read these operating instructions carefully before connecting your device to the power supply, in order to avoid damage due to incorrect use.
  • Before the first switching on check that the voltage indicated on the rating label corresponds to the mains voltage in your house.
  • Incorrect operation and improper handling can lead to malfunction of the appliance and injuries to the user.
  • Do not use it outdoors or in damp areas.
  • The appliance is intended for use only in domestic aims. The unit is not intended for industrial and commercial use, and also for use in:
    • kitchen area for the stuff of shops, offices, and the other industrial places farmhouses
    •  hotels, motels, rest homes and other similar places by residents.
  • Do not disassemble the juice extractor when it is plugged to the power supply. Always unplug the appliance from the power supply before cleaning and when not in use.
  • To prevent the risk of electric shock and fire, do not immerse the appliance in water or any other liquids. If it has happened, unplug it immediately and check in a service center.
  • The appliance is not intended for use for physically, sensory or mentally disabled persons (including children) or for persons with a lack of life experience or knowledge if only they are under supervision or have been instructed about the use of the unit by a responsible person.
  • Children must be under control in order not to be allowed to play with the appliance.
  • Do not leave the appliance switched on when not in use.
  • Do not use other attachments than those supplied.
  • In case of power cord is damaged, its replacement should be done by the manufacturer or service department or the other high-skill person to avoid any danger.
  • Do not attempt to repair, adjust or replace parts in the appliance. Check and repair the malfunctioning appliance in the nearest service center only.
  • Keep the cord away from sharp edges and hot surfaces.
  • Do not pull, twist, or wrap the power cord around the appliance.
  • Do not place the appliance near gas or electric oven or store at a heated surface.
  • Avoid contact with moving parts.
  • The grating filter is very sharp, so handle it with care.
  • Warning! Do not use the appliance if the rotating strainer is damaged.
  • Always make sure the safety lock is fastened correctly before switching on. The unit is designed to shut off automatically if locks are not fastened securely in place.
  • Do not push products into the appliance by fingers while it is in operation. If food becomes lodged in the feeder tube, use a pusher to push it down.
  • If this doesn’t work, turn the motor off, unplug the unit, and then disassemble the juice extractor to remove the remaining food.
  • Do not run the juice extractor continuously for longer than 10 minutes. Turn off the switch and let it rest for at least 10 minutes to cool down the motor, otherwise, the motor may be damaged.
  • Every time make sure that the appliance is unplugged and all moving parts with the motor are stopped completely before disassembling and cleaning.
  • Be sure to switch off the unit after each use.
  • Do not overload appliances with products.
  • It is not recommended to keep the non-loaded unit for more than 1 minute.
  • If the product has been exposed to temperatures below 0ºC for some time it should be kept at room temperature for at least 2 hours before turning it on.
  • The manufacturer reserves the right to introduce minor changes to the product design without prior notice unless such changes influence significantly the product’s safety, performance, and functions.
  • The manufacturing date is indicated on the unit and/or on packing as well as in accompanying documents in the following format XX.XXXX where the first two figures XX is the month of production, and the following four figures XXXX is the year of production.

BEFORE USING FOR THE FIRST TIME

  • The juice extractor is used for the preparation of fresh juice of vegetables, fruits, greenery, and berries.
  • After unpacking the unit and before any use, make sure the mechanical parts of the unit and all attachments are not damaged.
  • Wash and dry all parts of the appliance, which will come into contact with products. To clean the outside of the body use a damp sponge.
  • Practice assembling and dismantling the unit a few times before making juice.

HOW TO ASSEMBLE DISMANTLING

  • Unplug the appliance from the power supply.
  • Open the locks.
  • Remove the transparent lid, pull the grating filter upwards, then take off the separating unit. While doing this, hold it by the beak from below and by the underside of the top of the unit on the other side.

ASSEMBLING

  • Place the separating unit on the motor unit, and push with both hands on the separating unit until it clicks into place.
  • Insert the grating filter; turn it clockwise to fit securely.
  • Mount the transparent lid and fasten the locks.
  • Place the pulp container under the cover, and the glass – under the beak for juice.
  • Plug the appliance to the power supply.

OPERATING INSTRUCTIONS

  • This appliance is equipped with a safety system. If the cover is not correctly placed or the locks are unfastened, the appliance will not function.
  • Turn the anti-drop nozzle with the hole facing down.
  • The position of the anti-drop nozzle with the opening up is used to prevent residual juice drops from falling on the table.
  • Before starting make sure that the juicer is switched off and the transparent lid is fixed properly.
  • Wash fruits and vegetables thoroughly. Cut fruits into small pieces so as to be fitted into the feeding tube. Remove the stone or peel from those citrus and fruit: prunes, apricots, cherries or oranges, lemons, melons, etc.
  • Place a juice jug under the spout.
  • Plug the cord into the wall socket. Switch on the appliance and choose desired speed:
  • Speed I: for soft foods (pears, strawberries, oranges, plums, grapefruit, lemon, grapes, marrows and pumpkins, cherries, onions, cucumbers, garlic).
  • Speed II: for hard foods (artichokes, carrots, fennel, apples, beets, potatoes, pineapple, cabbages, leeks, celery, spinach).
  • Feed the pre-prepared fruits and vegetables into the juice extractor and press down gently with the pusher. NEVER USE FINGERS AS PUSHERS.
  • The motor must always be running after fruit or vegetables were fed into the appliance.
  • When the pulp container or juice jug is full, switch off the power and empty the containers before continuing the process.

CAUTION

  • The juice extractor cannot process bananas, peaches, apricots, mangos, papayas, etc.
  • The juice extractor cannot process coconuts or other hard food.
  • When the process is completed, switch off and unplug the unit.

CLEANING
Remove and wash all removable parts in warm soapy water. Rinse the filter assembly from the underside for easy removal of residue from strainer holes. Do not use a dishwasher or very hot water.

  • Do not use steel wood, abrasive cleaners, or scouring pads on the appliance.
  • To clean the outside of the motor unit, use a damp sponge.
  • Never immerse the body in water.
  • Some vegetables, such as carrots, may cause discoloration of the plastic. Reduce this by washing parts immediately after use with a small amount of non-abrasive cleaner on a cloth, rub gently, then rinse well and dry.
  • The grating filter must be replaced as soon as any signs of damage or wear and tear appear.

STORAGE
Store assembled cleaned and dried juice extractor in a dry place.

The symbol on the unit, packing materials, and/or documentation means used electrical and electronic units should not be toss in the garbage with ordinary household garbage. These units should be passed to a special receiving point.
For additional information about an actual system of garbage collection address to the local authority. Valid utilization will help to save valuable resources and avoid negative work on public health and the environment which happens with incorrect using garbage.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals