SHARPER IMAGE 208843 Rearview Bicycle Camera Instruction Manual

SHARPER IMAGE 208843 Rearview Bicycle Camera

PARTS

1. Monitor
2. Nut
3. Monitor base
4. camera signal cable
5. camera base
6. Velcro tape
7. Storage t riangle bag

INSTRUCTION

Step 1:
Remove the nut from the monitor

Step 2:
Assemble the nut into the base, tighten the nut between monitor and base

Step 3:

1. Adjust the screws and install the monitor on the handlebar
2. Tighten the screw to stablize the monitor

Step 4:
Camera Install:

1. Loosen the camera base nut
2. Fix thhe camera on the seat bar
3. Tighten the camera base nut

Step 5:
Place the cable in place

1. Spread the cable along the frame of the bicycey, see photo
2. Use the velcro to fix the cable on the frame
3. Plug the 3.5MM cable into the monitor

Final Look

BIKE REAR VIEW CAMERA

Screen Size: Aspect Ration: Resolution:| 4.3″ AHD 1080P

16:9

IPS800(H)’480(V)

---|---
Input Voltage:| sv
Brightness: Battery Capacity:| 1000cd/m2 S000mM
Solutions:| 1/2.9″ 2053
Image Format Effective Pixel: Angle:| AHD

1920Hx1080V

130°

Power supply: waterproof Grade:| SV IP68

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>