Crystal WMT110 Fyrefly Jet Deck Mount Owner’s Manual

: June 12, 2024
: CRYSTAL

Table of Contents

Crystal WMT110 Fyrefly Jet Deck Mount
Product Information
Product Usage Instructions
Function
Specifications
Nozzle effects
Performance
Nozzle part number
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Crystal WMT110 Fyrefly Jet Deck Mount

Crystal-WMT110-Fyrefly-Jet-Deck-Mount-product

Product Information

The product is a nozzle designed for spraying liquids. It is available in three models: WM T110A501, WM T110A507, and WM T110A508. The nozzle has a throw range, spray height, and spread distance that vary based on the model and the settings.

Nozzle Specifications:

Main Pipe Diameter: 1″, 1-1/2″, or 2″
Suction Pipe Diameter: 1-1/2″, 2″, or 2-1/2″
Number of Jets: Varies based on the model

Pump Specifications:

HP (kW): 1/2 (0.37), 3/4 (0.56), or 2 (1.49)
Pump Head: 28ft (8.5m), 31ft (9.5m), or 35ft (10.6m)
Flow Rate (US gpm): 21.5 (83.2), 42.5 (164.5), or 85 (329.0)

Product Usage Instructions

To use the nozzle effectively, follow these steps:

Select the appropriate model of the nozzle based on your requirements.
Choose the desired main pipe diameter and suction pipe diameter according to your setup.
Ensure that the pump meets the specifications mentioned in the user manual.
Connect the nozzle to the main pipe and suction pipe securely.
Adjust the pump settings, including the HP (kW) and pump head, based on your desired spray height and spread.
Turn on the pump and adjust the flow rate (US gpm) as needed.
Direct the nozzle towards the desired area for spraying.
Monitor the spray height and spread to ensure it meets your requirements.
Make any necessary adjustments to the pump settings or nozzle position to achieve the desired spray pattern.
After use, clean the nozzle thoroughly and store it in a safe place.

For more detailed instructions and safety guidelines, please refer to the product user manual.

Function

Most pool designs can be complimented with this versatile cast-in-place jet. Sparkling streams from a wide arch, graceful, but with significant mass and form. Single jets can act as accents while groups will form a strong focal point of water, light, and sound.
For in-deck mounting the jet is 40° from vertical giving a graceful low arch ideal for large pools.
For in-wall mounting the jet is 40° from horizontal, allowing a similar arch but the source of the water is hidden below the coping.

Specifications

WMT110
Construction of the basic jet shall be cast bronze, brass, and stainless steel with copper ground lug. The nozzle is removable for periodic cleaning.

Water inlet: 2 x 1-1/2″ N.P.T female
Hardware included:

1. 1- ½” PVC plug for proper plumbing
2. PVC nozzle cover for construction and winterization

Options

Mounting brackets to be ordered separately (part no. WMT108, set of 2 brackets c/w. fasteners)
B.S.P.T inlets available, Contact Crystal Fountains

Notes

To prevent nozzle plugging due to debris, fine pump inlet screening (strainer openings 0.04″) is recommended.
For interactive play do not exceed 20 feet per second (13.77 GPM).
Two ¾”-16 bolts are required to lift the nozzle insert, Bolts not included, minimum length 1″.
The winter/construction cover is not a pressure-rated cover. $Crystal-WMT110-Fyrefly-Jet-Deck-Mount-fig- $2$$

Nozzle effects

$Crystal-WMT110-Fyrefly-Jet-Deck-Mount-fig- $3$$

Performance

$Crystal-WMT110-Fyrefly-Jet-Deck-Mount-fig- $6$$

$Crystal-WMT110-Fyrefly-Jet-Deck-Mount-fig- $7$$ $Crystal-WMT110-Fyrefly-Jet-Deck-Mount-fig- $5$$

Sizing based on 50 ft of the main pipe, 50 ft. of suction line, and 1 ft. of feed pipes. If the number of jets is an odd number (e.g. 3, 5) or greater than 4, a manifold should be used. The manifold and main pipe sizes should be the same. The lengths of all feed pipes should be the same.

Build Your 20° Vertical Deck Mount FyreFlyJet:
To order, use the table below and specify the Part Numbers

Series#
WMT110

Nozzle part number

WMT110A501 (Eight 3/16″ Dia. heavy spray)
WMT110A507 (Fifteen 1/8″ Dia. light spray)
WMT11 0A508 (Seven 3/16″ Dia. fan spray)

PROPRIETARY AND CONFIDENTIAL
THE INFORMAllON CONTAINED IN Tl11S DRAWING IS THE SOLE PROPERTY OF CRYSTAL FOUNTAINS INC. Nf’f REPRODUCTION IN PART OR AS A WHOLE WllliOVT THE WRITTEN PERMISSION OF CRYSTAL FOUNTAINS INC. IS PROHIBITED.

Due to technical progress, all designs, specifications, data sheets, and components are subject to change without notice. All product information contained In this cut sheet Is for Information only. Please consult our website for up-to-date engineering drawings. Certificates of conformance are issued if required.