rOIDMI XDJ07TM Smart Cordless Wet Dry Vacuum Cleaner User Manual

rOIDMI XDJ07TM Smart Cordless Wet Dry Vacuum Cleaner

Smart Cordless Wet Dry Vacuum Cleaner Operation Manual

Read manual before use. Keep it well for future reference. Pictures are for reference only, actual product may vary.

Safety Precautions

Latest operating instructions
Scan the QR code for manuals in multiple languages
Hereby, [ROIDMI INFORMATION TECHNOLOGY CO, LTD.] declares that the radio equipment type [Bluetooth Module] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:http://doc.roidmi.com/web/#/’0?page_id=0

Explanation of symbols

The lightning symbol inside a triangle is used when there is a potential risk of personal injury, such as electric shock.

An exclamation mark in a triangle indicates important instructions in this operating manual that carefully have to be observed.

The arrow symbol indicates specific tips and advice on operation.

Safety instructions

Read the manual before use.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING READ ALL INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE}.Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

WARNING – To reduce the risk of fire, electric shock, or injury:

Adapter use

1. This adapter is only applicable to the appliance designated by ROIDMI;
2. Do not spray or immerse the body or plug in water;
3. Do not disassemble the power adapter by yourself to avoid fire or electric shock accidents;
4. If the shell is damaged, do not use the adapter to avoid the risk of electric shock;
5. The adapter is for indoor use only, please do not expose it to rain;
6. Before cleaning or maintaining the adapter, remove the plug from the socket;
7. Please be sure to unplug the plug from the power socket before cleaning and maintenance to avoid electric shock and injury;
8. If the cord is damaged, it must be replaced by the manufacturer, its service agent or qualified personnel to avoid danger;
9. Do not try to use this adapter to charge non-rechargeable batteries;

Charging

1. Before charging, please check the following items: 1 Check whether the adapter specification information is consistent with the required power supply voltage; 2 Please use AC power with rated voltage, do not use generators or DC power, etc., to avoid fire and electric shock;3  Do not use a charger other than this product to charge the machine, please use a designated charger to avoid battery failure or extreme thermal effects;
2. Do not touch the plug or any live part of the product with wet hands to prevent the risk of electric shock;
3. Be sure to insert the plug firmly to the end to avoid electric shock, short circuit and fire;
4. During charging or use of the product, if the body is deformed, has abnormal please immediately cut off the power and unplug the plug, and place the product in an open area without combustible materials to ensure safety and manufacture Replacement and maintenance by the supplier or its dedicated maintenance personnel to avoid danger;
5. When unplugging the plug, be sure to hold the insulated part of the adapter body, and do not pull the power cord;
6. This appliance contains batteries that are only replaceable by skilled persons.
7. This appliance contains batteries that are non-replaceable.

Appliance use

1. Do not wet the appliance, to prevent a fire and electric shock accident due to a short circuit of the machine;
2. Do not use this appliance near or on the surface of flammable and explosive objects, which may cause the risk of fire and explosion;
3. This appliance is not suitable for use by children or people with poor physical, sensory, and mentality, and people who lack experience and knowledge. Please supervise during use;
4. Do not use this appliance to pick up detergent, kerosene, gasoline, alcohol, paint, perfume, etc., these liquids may cause the appliance to short-circuit, fire or explode;
5. Do not use this appliance to pick up toner ink used in laser printers and copiers. These objects may cause fire or explosion;
6. Do not use this appliance to pick up any burning or smoking objects, such as soot from an unextinguished heat source, burning cigarette butts or matches, etc.;
7. Do not place the airflow channels and movable parts of the appliance close to long hair, Changsong clothes, fingers and other parts of the body;
8. Do not disassemble, repair, or modify by yourself to avoid fire, injury, or poor operation, except for the replacement of consumables according to this manual;
9. In the event of an abnormal failure, please immediately cut off the power supply and stop using it to avoid smoke, fire and electric shock;
10. If electric leakage , excessive motor temperature or abnormal noise are found during use, such as overheating of the body, abnormal sound, odor, weak suction, etc., stop using it immediately and contact our company’s after-sales maintenance personnel;

Daily cleaning and maintenance

1. If appliance is not in use for a longtime, you should immediately turn off the power and unplug the charging plug;
2. The battery is a sealed device, and there is no safety hazard under normal circumstances. Under extreme conditions, if liquid leaks out of the battery it may cause irritation or burns. If you touch it carelessly, please follow the following precautions: 1 lf contact with skin-wash with soap and water;2 lf contact with eyes-wash with water immediately At least 15 minutes and seek medical help;
3. Please check the smoothness of the suction nozzle regularly. If there is a blockage, please clear it in time to avoid the blockage causing a decrease in suction and affecting the performance of the machine;
4. After using the machine, please clean the waste water tank in time, keep the ventilation path unobstructed, to avoid blocking the suction power and the motor heating, which will affect the service life of the appliance;
5. Please use a dry cloth to clean the dust on the plug regularly to avoid fire due to poor insulation and other reasons;
6. If you do not use the appliance for a long time, please make sure to charge it at least once a month to avoid serious damage to the battery due to lack of power;
7. Before disposing of the appliance, please take out the battery from the machine;
8. Before removing the battery, be sure to turn off the power to the appliance and operate it. Please place the removed battery properly; rotate the display cover clockwise.you can open the display, unplug the display cable, remove the display, then use a screwdriver to remove the 4 screws of the battery cover, and remove the battery cover, unplug the battery connection line, then the battery pack can be taken out
9. Please turn off the power before cleaning the appliance;
10. Do not run the brush on the power cord.

Storage

1. Please keep the floor appliance away from the electromagnetic equipment of the hospital;
2. Keep the charger away from all heat sources;
3. After using the appliance, please store it in a dry and cool place;
   If the appliance fails, please contact the after-sales personnel, do not repair by yourself to avoid danger;lf you need to transport or mail it , please pour out the liquid in the clean water tank and waste water tank, and wipe both water tanks to prevent backflow and causing damage the appliance;

Household use only

Scope of use of the appliance

1. This appliance is suitable for hard floors in indoor environments, including waxed floors, stone floors, rubber floors, marble floors, granite floors.terrazzo floors, solid wood floors, composite floors, bamboo floors various mirror tiles, porcelain tiles and other flat surfaces. If it is not bumpy when using this product on a flat ground surface, the best results may not be achieved;
2. Do not use this product near working fireplaces or heaters to prevent deformation of the machine shell;
3. Do not pick up high-temperature substances (unextinguished cigarette butts, matches or hot ash, etc.), ultra-fine substances (such as lime, cement, wood chips, gypsum powder, ashes, etc.)carbon powder, etc.) dangerous goods (such as solvents, descaling agents, etc.}, chemical substances (such as acidic substances, detergents, etc.) and other substances with uncertain physical properties;
4. Do not use this appliance to pick up sharp objects, such as glass pieces, small toys, pins, paper clips, stones, plaster, large pieces of paper, etc as they may cause blockage and damage the machine;
5. Stains with strong grease, strong stickiness or strong dyeing properties such as shoe polish, paint, paint, etc., are not within the scope of use of this product;

Appliance

1. Do not disassemble and assemble the closed parts of the appliance by yourself. There are no parts that can be repaired by the customer, and do not try to change the performance of the machine, otherwise it will cause danger;
2. Using a voltage that does not correspond to the specifications of this product will damage the motor and is more likely to cause harm to the user;
3. When cleaning the stairs, be extra cautious to prevent falling;
4. Do not shake or bump the machine up and down to prevent waste water from flowing into the motor;
5. Please do not tilt the machine to one side or lay it flat to prevent waste water from entering the motor;
6. Do not use if the clean water tank and waste water tank are not installed correctly;
7. Do not place any small objects on the air outlet,or block the air outlet. Remove the small objects that may hinder the smooth air flow of the air outlet to prevent the machine from overheating;

Other

1. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction;
2. Children being supervised not to play with the appliance;
3. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance;
4. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved;
5. Children shall not play with the appliance;
6. Cleaning and user maintenance shall not be made by children without supervision;
7. The network standby power consumption is 0.99W, the ordinary standby power consumption is 0.50W, after the machine is fully charged, it will enter the network standby immediately after power on or standby;
8. The WiFi module takes effect when the machine is turned on or in standby. If you want to turn off the WiFi module. you need to place the product on the charging base and the battery is fully charged. Press and hold the power button for 5 seconds, and the WiFi module will be turned off after the machine is turned off;
9. The appliance is only to be used with the power supply unitXDJCDZ01RM /XDJCDZ01RM* charging base and original factory designated charger;

Product Introduction

Smart Cordless Wet Dry Vacuum Cleaner

Charging Base

Accessories

Installation and disassembly of appliance
Installation: Insert the end of the handle into the host interface of the appliance in a vertical direction, until you hear a “click” sound, then make sure that the handle is tight and not loose, and the installation is successful.

Disassembly: Use a hard object to reach into the handle disassembly hole on the back of the fuselage to press the shrapnel, and at the same time pull out the handle of the machine.

Installation of accessories

Installation of Charging base

1. Press down the two accessories of the storage base along the buckle of the charging base until you hear a “click” sound after that, the installation is successful.
2. Connect the charging port at the back of the charging dock to the power adapter, and then turn on the power

WARNING

1. Do not let children or pets approach the appliance to avoid injury;
2. Please do not install violently to avoid unnecessary damage;
3. Please power off the machine before installing accessories and disassembling the clean water tank and waste water tankto avoid danger;
4. When there is water in the clean water tank or the waste water tank, be sure to be careful of slippery hands to prevent hurting yourself during the disassembly process.

Product use

Power on machine and mode switch
Click the power switch , press and hold for 1 second to turn on the machine, the machine starts to work, and the default smart mode is turned on;
In the running state, click the switch button to switch between Smart Mode, Suction Mode, and Refreshing Mode.

WARNING

1. Do not use the appliance to absorb foam liquid;
2. Do not tilt the appliance more than 140″ to avoid water leakage;
3. In order to prevent waste water from flowing out, please do not lay the appliance flat or shake it violently, so as to avoid liquid backflow damaging internal components;

Display functions introduction

and flashing
Clean water tank is short of water| The screen corresponding to the clean

water tank indicator is always on

| WiFi disconnected| The corresponding WiFi indicator on the screen is off

Waste watertankfull

| The correspondingwastewatertank indicator on the screen keeps flashing. The waste watertank to bedetected is notfull, and the status light is off.| ****

WiFi connected

| ****

The corresponding WiFi indicator on

the screen 1s on

Waste water tank not in place

| The indicator light corresponding to the wastewater tank on the screen is always on, and goes out after the installation of the waste watertank is detected.| ****

Voice prompts off

| ****

The corresponding voice indicator on the screen is off

Self-cleaning start| The corresponding self-cleaning status indicator on the screen is always on, and goes out after the program ends| Voice prompts on| The corresponding voice indicator on the screen is always on

Charging base use
Place the charging base on a level ground and place the appliance on the charging base vertically and then charge it after powering on.During the charging process, the fan will be automatically turned on to dry the roller brush (the fan will continue to run for about 3 hours and then stop). During the air-drying process, the roller brush will automatically rotate to a certain angle every 3 minutes (the roller will stop rotating after about 3 hours). During the operation of the fan, You can press the power button or the mode switch button to end the drying function.

WARNING

1. If you do not use the machine for a long time, please make sure to charge it at least once a month to avoid serious damage to the battery due to lack of power;
2. lfthe appliance is still charging after the normal charging time, please stop charging immediately, otherwise the battery may generate heat, deformation or extreme thermal effects;
3. If you need to discard the appliance, please power off the appliance and remove the battery;
4. Please dispose of used batteries safely and properly, and do not throw them into fire, water, or soil;
5. If the battery leaks and touches your skin or clothing, please rinse with clean water to avoid skin discomfort. If you still feel unwell, seek medical attention immediately.

Use of self-cleaning function (The self-cleaning function can only be used when it is charged and the power is more than 20%)
After you’re done cleaning.put the host back to the base in time to ensure that the water in the water purification tank is sufficient. Short press the self-cleaning button on the right side of the fuselage, the self-cleaning prompt on the screen lights up and the self-cleaning starts. After the self- cleaning is over, the host continues to enter the charging base, and the air- drying roller brush can be started through the APP control.

How to reset and clear user data
Reset: Use the tool to press the reset button for 1 sec to restore the factory settings of the appliance
Clear user data: In shutdown mode, press the andQ switch buttons at the same time and hold for ;,,3 seconds to enter the factory reset state (after clearing the user data, it will automatically shut down)

Disassembly and use of clean water tank

1. Press down the release button of the clean water tank and pull it out to disassemble the clean water tank

2. Open the sealing cover of the water inlet of the clean water tank

3. Place the water inlet of the clean water tank under the water source and fill it with about < 720ml clear water.

4. After buckling the sealing cover of the water injection port, aim the clean water tank at the machine and press the clean water tank release button and push it in. After hearing the “click”, the installation is successful.

5. Press down on the waste water tank release button and pull it out to remove the waste water tank.

6. After taking out the waste water, pull out the upper cover of the waste water.

7. Take out the solid-liquid separator upwards.

8. Dump the garbage and clean the solid-liquid separator.

9. Pour out the dirty water.

10. Install the solid-liquid separator and the upper cover of the waste watertank back to the original position and align it with the machine, then press the waste water tank release button and push it in. After hearing the “click”, the installation is successful.

WARNING

1. Please use the charging stand specially equipped for the floor appliance to charge.
2. If the battery is still charging after exceeding the normal charging time, please stop it immediately, otherwise there may be dangers battery heating, deformation or extreme thermal effects.
3. Please clean up the waste water tank in time to avoid overfilling the tank causing inability to to suck in new sewage.
4. Please replenish water for the clean water tank in time to avoid water shortage when mopping the floor.

This product has been connected to Mi Home and can be controlled through Mi Home APP.
“Works with MIJIA” is only verified at the software level. Xiaomi is not responsible for the production, standard implementation, quality supervision and other aspects of the product and the company.

Mi Home App Installation
Scan the product QR code, or search for “Mi Home” in the app store, download and install the Mi Home APP; users who have installed the Mi Home APP will be directed to the device connection page.

Add device

1. Open the Mi Home APP and login to your account;
2. Click”+” in the upper right corner of the APP homepage to enter the add device page;
3. Click”H” in the upper right corner of the add device page to scan the product QR code, follow the instructions on the page to add the device and use it

Tip: When the product QR code cannot be scanned, you can complete the device addition by searching for the product name.
In addition, due to the continuous upgrade and update of the Mi Home APP, the actual operation may be slightly different from the above description, please follow the current instructions in the Mi Home APP.

Product cleaning

Please turn off the appliance before cleaning. If you need to replace the parts, please use ROIDMI designated parts to avoid damage to the product.

Disassembly and cleaning of the waste water tank and cleaning of the optical flow sensor

1. Press down on the buckle of the waste water tank and pull it out to disassemble the waste water;
2. Gently wipe the optical flow sensor on both sides of the appliance body with a rag or wet paper towel;
3. Take outthe waste water tank and take out the upper cover of the waste water tank and pour out the dirty water, then take out the filter element upward and separate it from the upper cover of the waste water tank;
4. After rotating as shown in the figure, remove the protective cover of the light guide column downwards;
5. Wash the filter element, the upper cover of the waste water tank, and the protective cover of the light guide column with clean water and air dry;
6. . Install the filter element, the upper cover of the waste water tank, and the protective cover of the light guide column back to the original position;
7. Take out the solid-liquid separator upwards;
8. Dump the garbage and clean the solid-liquid separator;
9. Use the cleaning brush to reach down into the cleaning pipe;
10. Use a cloth or wet paper towel to clean the surface of the light guide on both sides of the filter element and install it back in place;

NOTICE

1. Pay attention to the amount of waste when disassembling the waste water tank to avoid splashing of dirty water during the disassembly;
2. The filter element needs to be completely air-dried before use, so as not to cause odors and reduce filter performance;
3. When installing the recovery tank back to its original position, make sure that the filter element has been installed;
4. Please clean the optical flow sensor and light guide on the appliance regularly to avoid affecting the performance of the machine;

Cleaning the brush cover

1. Press the roller brush cover release button and lift up to open the cover,
2. Rinse with clean water and wipe the cover plate and install it back in place;

NOTICE

1. After cleaning the cover, be sure to install it back to its original position to avoid the roller brush from working without protection;
2. In order not to affect the performance of the machine, it is recommended that you regularly maintain its parts;

Cleaning of soft roller brush

1. Pull the roller brush pull ring outwards to pull the roller brush directly;
2. Use clean water to clean the roller brush and install it back to its original position;

Basic parameters

Smart Cordless Wet Dry Vacuum Cleaner

Product Name| Smart Cordless Wet Dry

Vacuum Cleaner

| Product Model| XDJ07RM / XDJ07RM
---|---|---|---
Nominal Voltage| 21.GV| Rated Power| 250W
Rated Capacity| 3500mAh/75.6Wh| Product Size| 1100•280•253mm
Rated Charging Voltage| 27.5V| Charging Time| About4h
Product Weight| About4.5kg| Clean/WasteWaterTank Capacity| About0.72L/About0.69L
Battery Life (Smart/Suction/ Refreshing mode)| About35min/29min/35min| Noise| ,s;;78dB (A)

*The maximum storage capacity of the wastewatertankwithout a solid-liquid separator n iOS10
Android Freqency system Range: version is 2400-2483.5MHz; not lower than Maximum Android Transmiting 4.4,Apple device Power: is not 20dBm(EIRP) lower tha

Charging Base

0282750100UK;Japan: AD-0282750100JP; Taiwan: AD-0282750100TW;Australia: AD- 0282750100AU;United States: AD-0282750100US; Korea:AD-0282750100KC;

Remark: *could be 0-9 or A-Z, indicate for different color and accessories.

Troubleshooting

When the appliance fails to operate normally, please troubleshoot by yourself or contact customer service staff in time for troubleshooting

Failure Phenomenon| Cause Of Issue

The floor brush is entan ed with excessive

| Solution
---|---|---
Electric floor brush does not rotate| hair fibers and other ong windings

gUse nsoft velvet roller brush on unsuitable

| Clean the entanglement of the floor brush

Replace the soft velvet roller brush to

rou d| change the use environment

The motor does not rotate

| Low battery| Charge the appliance
The waste water tank is full| Pour out the dirty water
Usetime is too long, temperature is too high| Allow to cool down, restart to use

Reduced suction power of scrubber

| Low battery| Use after fully charged
Themouth ofthe suction nozzleis blocked| Clean up foreign objects in the mouth ofthe nozzle
Tohtheerroollebrjebcrtussh is entangled by hair and| Clean the roller brush
Wwarostnegwinasttearlltaatniokn of roller brush and| Re-install
Tchaeparecqiotyverytank has reached the specified| Pour out the waste in the waste water tank
Product cannot be charged| Tnhoet choonsnt eacntdetdhweealdl apter interface are| Reconnect after checking
The ground can’t get water| Water shortageinthewater purification tank

The clean water tank is not installed

| Water purification tank

Reinstall the clean water tank

Self-cleaning does not work

| Tphaertriocllelesr brush may be jammed by large| Open the brush cover to check
The machine is not charging| Make sure the host is in the charging state
before starting the self-cleaning function
Machine power is less than 20%

T recovery tank is not installed in place /

| Recharge, and power>20% to restart the self-cleaning function
the recovery ank is full

Thhee  l   n wateerrtannkkisinot instaollewd ian plrace/

| Reinstall or dispose of the waste water tank
t clean wat ta s short f te| Reinstall or add water to the clean water tank

Disposal

Correct disposal of this product

This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Warranty and limitations of liability

This product is guaranteed for a period of 12 months (defined by local law) from the date of purchase against any failure resulting from manufacturing or material defects. This warranty does not cover damage caused by improper installation, improper use, or normal wear and tear of the product.

More specifically, the warranty does not cover:

• Damage or problems caused by improper use, accident, alteration or electrical connection of improper intensity or voltage.
• Modified products, those whose warranty seal or serial number have been damaged, altered, removed or oxidized.
• Failure of the battery due to overcharging or failure to observe the safety instructions explained in the instruction manual.
• Cosmetic damage, including scratches, dents, or any other element.
• Damage caused by any intervention carried out by an unauthorised person.
• Defects caused by normal wear and tear or due to normal ageing of the product.
• Software updates due to a change in network settings.
• Product failures due to the use of third party software to modify, change or adapt the existing software.
• Product failures caused by use without accessories approved by the manufacturer.
• Oxidised products.

Terms and conditions of implementation:

• To obtain a warranty service, you are requested to return your product to the customer service desk of your retail outlet with your proof of purchase (receipt, invoice, .), the product and its supplied accessories, with its original packaging.
• It is important to have the date of purchase, the model and the serial or IMEI number on hand as information (this information usually appears on the product, the packaging or your proof of purchase).
• Failing this, you must return the product with the accessories necessary for its proper operation (power supply, adaptor, etc.).
• In the event that your claim is covered by the warranty, the after-sales service may, within the limits of local law, either:

Repair or replace defective parts.

• Exchange the returned product with a product that has at least the same functionality and that is equivalent in terms of performance.
• Refund the product at the purchase price of the product mentioned on the proof of purchase.
• If one of these 3 solutions is used, this does not give rise to the extension or renewal of the warranty period.

Manufacturer: ROIDMI INFORMATION TECHNOLOGY CO., LTD.
Address: 4F, C8 BUILDING, NO. 1699 HUISHAN ROAD, LIFE SCIENCE AND TECHNOLOGY PARK, HUISHAN DISTRICT, WUXI, JIANGSU, PRC

Executive standards:
(EC) 1275/2008: 2008-12-17 Amended by (EC) 278/2009:2009-04-06, (EC) 642/2009:2009-07-22, (EU) 617/2013:2013-06-26; (EU) 801/2013:2013-08-22, EN 50564:2011
EN 60335-1:2012/A15:2021, EN 60335-2-2:2010/A1:2013,EN 62233:2008,EN 60335-2-10:2003/A1:2008, EN 55014-1:2017/A11:2020, EN IC 55014-1:2021, EN
55014-2:2015, EN IC 55014-2:2021, EN 61000-3-2:2014, EN IC 61000-3-2:2019/A1:2021, EN 61000-3-3:2013, EN 301 489-1 V2.2.3:2019, EN 301 489-17
V3.2.4:2020,EN 61000-3-3:2013/A1:2019, EN 300 328 V2.2.2:2019, EN 50663:2017,EN 50665:2017,2011/65/EU

Illustrations may differ from actual product. We are constantly striving to improve our products; therefore the specifications contained
herein are subject to change without notice.
Service email: service@roidmi.com
Corporate website: www.roidmi.com/en
For product sales information, please check the website: www.roidmi.com/en
XDJ07RM _XDJ07RM* _UM_EN_No.02.2023

Scan the QR code for manuals in multiple languages

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>