Haunted Hill Farm HHWOODSKL-0BL Animatronic Skeleton Free Standing Decoration Instruction Manual

June 12, 2024
Haunted Hill Farm

Haunted Hill Farm HHWOODSKL-0BL Animatronic Skeleton Free-Standing

Decoration

Haunted-Hill-Farm-HHWOODSKL-0BL-Animatronic-Skeleton-Free-Standing-
Decoration-PRODUCT

Product Information

Halloween Figurine

The Halloween Figurine is a quality Halloween decor that is designed for indoor or covered outdoor use. It is not a toy and should be used with caution around children under the age of 8. The product comes with a body, two arms, and four screws for assembly.
The model number can be found on the side of the product’s carton.

Important Safety Instructions

  1. This product is for indoor or covered outdoor use only. Do not place in direct sunlight.
  2. This product is for decoration only and is not a toy. Please use caution with children under the age of 8.
  3. Do not position the decoration near candles, sources of heat, or in direct sunlight.
  4. The decoration cannot be connected to the power supply directly.
  5. Decoration should be on a level, stable surface to prevent it from falling over.
  6. This product is fragile and should be assembled with care.
  7. Please follow the steps and requirements specified in the instruction to ensure safety and reliability during the installation.

Storage Tips

We suggest saving the carton for storing your decor. Store in a cool, dry area where the temperature does not exceed 100F.

Product Usage Instructions

  1. STEP 1: Place the body’s back side up on a clean surface and place the arms in the position shown. (See Figure 1) Use a screwdriver to attach arms as shown. (See Figure 2) Take care to make sure screws do not break through the front of the skeleton figure.
  2. STEP 2: Use a screwdriver to unscrew the 2 screws that are fixed to the back holding the ground stake. Turn the stake to the correct position and reattach with 2 screws. (See Figure 3) If you want to use the skeleton indoors, leave the stake attached in the original position or remove it completely.

Your Skeleton is now ready to display!

  • The model number of your item is printed on the side of your carton.
  • Always use this number to identify your item.
  • Thank you for your purchase of this quality Halloween decor. With proper use and care, your Halloween decor will provide you with years of enjoyment. Please follow the instructions on how to assemble and disassemble your item.
  • If you should have any problems with your item, or you have any questions, DO NOT return it to the place of purchase. Please call our toll-free number: 1-888-840-4559 and a customer service representative will assist you. Enjoy your Holiday!

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

  1. This product is for indoor or covered outdoor use only. Do not place it in direct sunlight.
  2. This product is for decoration only and is not a toy. Please use caution with children under the age of 8.
  3. Do not position the decoration near candles, sources of heat, or in direct sunlight.
  4. The decoration cannot be connected to the power supply directly.
  5. Decoration should be on a level, stable surface to prevent it from falling over.
  6. This product is fragile and should be assembled with care.
  7. Please follow the steps and requirements specified in the instruction to ensure safety and reliability during the installation.
  • Storage tips: We suggest saving the carton for storing your decor. Store in a cool, dry area where the temperature does not exceed 100⁰F.
  • Your Skeleton includes : 1 Body, 2 Arms, and 4 Screws

A SCREWDRIVER IS NEEDED FOR ASSEMBLY SCREWDRIVER IS NOT INCLUDED

Haunted-Hill-Farm-HHWOODSKL-0BL-Animatronic-Skeleton-Free-Standing-
Decoration-FIG-1

STEP 1:

  • Place the body’s backside up on a clean surface and place the arms in the position shown. (See Figure 1)
  • Use a screwdriver to attach arms as shown. (See Figure 2)
  • Take care to make sure screws do not break through the front of the skeleton figure.Haunted-Hill-Farm-HHWOODSKL-0BL-Animatronic-Skeleton-Free-Standing-Decoration-FIG-2

STEP 2:

  • Use a screwdriver to unscrew the 2 screws that are fixed to the back holding the ground stake.
  • Turn the stake to the correct position and reattached it with 2 screws. (See Figure 3)
  • If you want to use the skeleton indoors leave the stake attached in its original position or remove it completely
  • Your Skeleton is now ready to display!
  • www.HauntedHillFarm.com

Documents / Resources

| Haunted Hill Farm HHWOODSKL-0BL Animatronic Skeleton Free Standing Decoration [pdf] Instruction Manual
HHWOODSKL-0BL Animatronic Skeleton Free Standing Decoration, HHWOODSKL-0BL, Animatronic Skeleton Free Standing Decoration, Skeleton Free Standing Decoration, Free Standing Decoration, Standing Decoration, Decoration
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Haunted Hill Farm User Manuals

Related Manuals