STAGE10 Wagging Squirrel Plush Pet Toy User Manual
- June 9, 2024
- Stage10
Table of Contents
STAGE10 Wagging Squirrel Plush Pet Toy
SPECIFICATIONS
- Name Plush Pet Toy
- Model Wagging Squirrel
- Dimension 350 x 80 x 150mm
- Weight 160 g
- Battery Litium-lon/ 500mAh/5V
- Content Lobster Toy, Micro-USB cable, 2x Catnip, Manual
CHARGING
The toy is fully charged in one hour
One charge provides 150 dancing cycles
Charging Fully
Charged
CATNIP
- Only use catnip that is sealed into a porous bag e.g. teabag (2 bags included
- Insert catnip bag into the pouch provided and close with the velcro.
IMPORTANT: Do not use loose catnip as this can damage the mechanism.
CAT TREATS
Pack dry cat treats into the front mouth opening of the Squirrel (treats not
included).
These either fall out when the toy is moved or the cat pops the treats out of
the mouth opening of the toy ldepending on how far the treats are pushed into
the mouth opening
HOW TO PLAY/ USE
- Open the Squirrel on the belly by pulling apart the Velcro.
- Fully charge the dancing Squirrel with the supplied Micro-USB charging cable until the LED turns green.
- Insert the catnip into the pouch on the side, move the switch to the ON position and close the Squirrel.
- The motion sensor will activate when moved, cycling through 3 types of realistic movements sequentially.
- No need to turn off the toy unless you don’t want it to move on touch. The toy goes into sleep mode once it isn’t being touched.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>