Penn State Industries PKNICK-BU Crown Jewel Twist Pen Kit Instructions
- June 12, 2024
- Penn State Industries
Table of Contents
Penn State Industries PKNICK-BU Crown Jewel Twist Pen Kit
Product Information
- Product ID: PKNICK-BU
- Number of Parts: 2
- Type: Bushing
- Thru Hole Standard: 0.248 inches
Notes: The tip and cap have the same dimensions Section Names: Barrel, Extension
Product Usage Instructions
- Ensure that the bushing is of the correct type and has a thru hole standard of 0.248 inches.
- Make sure that the bushing is new and that the bushing diameters (top row) vary by no more than .002 inches.
- Identify the correct section for installation, either the barrel or the extension.
- For each section, refer to the “Diameter” and “Length” columns to determine the specific measurements for each part.
- Install the bushing by placing it in the designated area according to the associated section.
- Repeat the installation process for each part, ensuring that the dimensions match the specifications provided.
- If using with PKRYL(XX) kits, refer to the associated kits for additional instructions or compatibility information.
- Last Published: Tuesday, May 9, 2023
PICTURE IS AN APPROXIMATE REPRESENTATION. NOT TO EXACT SCALE OR PROPORTION. ALL MEASUREMENTS IN INCHES. BUSHING DIAMETERS (TOP ROW) ARE OPTIMAL AND SHOULD VARY BY NO MORE THAN .002″ WHEN NEW.
- ID NUMBER PKNICK-BU NUMBER OF PARTS 2
- THRU HOLE STANDARD (0.248′)
TYPE: BUSHING
NOTE S: TIP AND CAP SAME DIMENSIONS
- PART NAME AND (QUANTITY)
SECTION ►
NAMECAP/TIP (2)
BARREL EXTENSION
ASSOCIATED PKRYL(XX)
KITS: Last Published: Tuesday, May 9, 2023
Read User Manual Online (PDF format)
Loading......