KlipXtreme KWH-750 Wireless Premium Headphones User Guide

: June 12, 2024
: KlipXtreme

**KlipXtreme KWH-750 Wireless Premium Headphones User Guide

**

WARNINGS

AUDIO PRODUCT WARNING!
Please keep in mind that permanent hearing loss may result from long-term exposures to sounds at high volumes. It is recommended to use as low a volume as possible.

This product might be capable of delivering sounds at loud volumes and high- pitched audible tones. Under certain circumstances, exposure to such loud sounds can result in permanent hearing loss damage. The volume level may vary based on the conditions such as audio source you are using, volume settings and the environment. Avoid prolonged use of headset at excessive sound pressure levels.

You can reduce the risk of hearing damage by following these safety guidelines.

Prior to using this product, follow these steps

Before using this product, make sure to turn the volume control to its lowest level.
Put the headsets on.
Slowly adjust the volume control to a comfortable level.

During the use of this product

Keep the volume at a comfortable or lowest level possible.
If increased volume setting is necessary, adjust the volume control slowly.
Ringing in the ears may be an indication that the sound level is too high.
Stop using the product if it causes great discomfort.

BATTERY WARNING!

“Caution”- Unless otherwise specified in the user manual or quick start guide, the battery in your product cannot be removed or replaced by the user. Any attempt to do so is risky and may result in damage of self and product.
Use of other batteries may present a risk of fire or explosion and the warranty will be voided.

CHARGER WARNING!

Do not use a wall charger with more than 5VDC/1A output.
When you disconnect the power cord, grasp and pull the plug, not the cord.Never use a charger that is damaged.
Avoid charging your product in extremely high or low temperatures. Avoid using the charger in damp areas.

Introduction

Thank you for purchasing the Style-KWH-750 stereo headphones with Bluetooth® wireless technology. We encourage you to read this quick installation guide thoroughly to get the most of this innovative wireless device.

Main features

The battery provides extended playback times of up to 40 hours with 500 hours of standby time*** on a single charge
Experience ultimate freedom with the latest V 5.0 streaming technology: that is higher speeds, expanded range and capacity compared to older devices equipped with this function
Compatible with Google and Siri voice assistant, it supports the voice recognition feature for true hands-free control and access to your linked device at the touch of a button
Fine-tuned acoustics delivered through high-performance 40mm drivers
Crisp highs, mids and dynamic bass can be equally enjoyed in wired or wireless modes
Seamless, hands-free management of your entertainment and calls
Adjustable headband with hinged earcups are built for all day comfort
Soft leatherette exterior enhances its stylish and sleek design
Foldable for easy portability in its attractive hard protective case

Package content

Wireless headphones
Type-C charging cable
3.5mm audio cable
User guide
Hard case

Product overview

Product Overview

: Increase volume/Next song
****: Power (mutifunction) button: Pairing mode, On/off, Play/pause, Answer and end a call, Reject a call, Call transfer and Voice Assistance function
: Decrease volume/Previous song
LED Indicator
Type-C charging port
3.5mm input jack
Built-in microphone
Cushioned ear pads
Adjustable headband

Product components

Control	Function	LED indicator
: Power	Power On: Press and hold this	1. The green and blue
(multifunction)	button for approximately 3	LED blinks alternately
button	seconds.	2. The LED turns off.
Power Off: Press and hold this	3. The LED will blink
button for approximately 3	green and blue
seconds.	alternately when in
Pairing mode: Press and hold this	pairing mode, and will
button for approximately 3	will blink green once it
seconds. (Same as power on)	has paired successfully
Control	Function	LED indicator
Play/Pause: Briefly press this button to play and pause media.5. Answer an

incoming call: Briefly press this button once to answer an incoming phone call (music will be paused)6. End a call: Briefly press this button once to end a call (music will resume)7. Reject a call: Press and hold this button for about 1 second to reject an incoming call8. Transfer a call: While on an active call, press and hold this button   to switch devices, from the headset to the mobile phone9. Voice Assistant: Press and hold this button for 1.5 seconds to enable the voice assistance for Siri or Google. Press this button two times to redial the last number called.|
:Volume up/next track button| Press and hold this button   to increase the audio level of the headphones2.   Press this button briefly to play the next track.|
Control| Function| LED indicator
: Volume| Press and hold this button|
down/previous| to decrease the audio level of the|
track button| headphones|
| Press this button    briefly to play|
| the previous track|

Basic operation

a. Charging your headphones

Plug one end of the supplied USB-C Type cable to your headphones USB-C port and the other end into the USB port of your computer or to a 5VDC/1A USB power adapter to fully charge the battery*.
Note: The headphones’ battery should be initially charged for at least 4 hours. Thereafter, the battery will take about 3 hours to recharge.
While the headphones are being charged, the LED glows red. The LED will turn OFF once the battery has reached full capacity.
When battery is low, the LED indicator will start blinking every five seconds. Also, when the remaining battery is at 20%, an audible prompt will be heard to indicate that the headphones need to be recharged.
Make sure that the headphones are fully charged before using them for the first time.

Do not use a USB fast charging or PD adapters with an output power greater than 5VDC; otherwise, you will damage your headphones and void the warranty.

b. Auxiliary wired connection

With the headset On or Off, insert the 3.5mm cable to play in Auxiliary mode. Plug one end of the supplied 3.5mm cable to your headphones and the other end to the 3.5mm auxiliary port in your input source.
The LED indicator on the headset will turn off and the headset will automatically switch to auxiliary in mode.
Note: When the Bluetooth® mode is enabled and the auxiliary cable is connected, you will experience a momentary loss of audio as the input changes to the wired 3.5mm connection.
Set the desired volume on the input source. The volume controls on the headphone will not operate when they are connected to an external wired audio source.
Note: Once you remove the cable, the device will not return automatically to Bluetooth® mode. Instead, you must turn the unit off and then on again to reactivate the wireless function.

Advanced operation

Pairing the headset with your mobile device

Turn on the headset by pressing and holding the power button. The LED light will start blinking green and blue indicating that it has entered into the Bluetooth® interface and is ready to be paired.
Next, set your Bluetooth® mobile device to “discover” the wireless headphones.
Place both devices not more than one meter away from each other.
On your mobile phone, tap the newly discovered audio device (Style-KWH-750) being displayed in the Bluetooth® list. The headset is now ready to be used wirelessly.
If you have a lower Bluetooth® version, you may be prompted to enter the passkey 0000 (4 zeros).
If pairing is successful, the LED will glow green. If after 60 seconds the pairing process fails, please turn off the headset and repeat steps 1 through 5 described above.
The headset will enter into the Standby mode and will eventually turn off automatically after five minutes if there is no matching device available for pairing.
Note: The headset will automatically pair to the last known connected device 3 seconds after is powered on.

Pairing the headphones to two Bluetooth® devices

Once the headset has paired with the first Bluetooth® compatible device, momentarily disconnect the headset from that first mobile device.
The blue and green LEDs on the headphones will start alternating to indicate that the device has entered into the pairing mode.
Using the second mobile or Bluetooth® device, set it to “discover” the wireless headphone.
On your mobile device, tap the newly discovered headphon (Style-KWH-750)to establish the wirelessly connection.
Now, return to the first Bluetooth® compatible device that was originally connected to and search for the (Style-KWH-750) headphone once again to reconnect.
Now, the headphones can be actively connected to the two devices at the same time.

Using the wireless headset

a. Answering and ending a call using your mobile device

When there is an incoming call, an alert tone will be heard through the headphones. Briefly press the multifunction button to pick it up. You may also press the answer button on your smartphone to take the call (music will be paused).
To end a call, simply press the multifunction button once again. Likewise, you may also finish the call directly using the end key on your mobile (music will be resume automatically).
To reject an incoming call, press the multifunction button for about 1 second.
Press and hold the multifunction button if during an active call, you want switch (or transfer) such call from the headset to the mobile phone.

b. Music playback

Briefly press the play/pause (multifunction) button to start and stop audio playback.
Press and hold the and buttons for 2 seconds to go to the next or previous track.
Briefly press the and buttons to increase or decrease the volume on the headphones.
When listening to music using your smartphone, playback will pause to allow the call to go through.
As soon as you hang up, music playback will resume automatically.

Troubleshooting

The headphones are not turning on.

Charge the headphones. If they don’t turn on even after charging, contact customer service for help.

he headphones are not charging

Check if the supplied USB charging cable has been properly connected to the headphones and the power source.
Verify if the power source is on and properly connected.
If using a USB charging cable different from the one supplied, make sure that it is properly connected and functioning.

The headphones are not pairing

Check if the Bluetooth® device is powered on.
Verify if the Bluetooth® mode is enabled on the device.
Check if both devices are within 1 meter from each other.
Verify if the Bluetooth® device is compatible with the headphones.

Music will not play through the headphones

Check if the headphones and the Bluetooth® device are powered on.
Verify if there is music playing on your Bluetooth® device.
Check the volume level on your Bluetooth® device.

There is distortion, lag or interference in the connection

Check if there is a 2.4GHz device close to the headphones or Bluetooth® device.
Verify that both devices are placed within the recommended distance.
Verify if the Bluetooth® version of the source you are using is older than the version on the headphones, such scenario may cause a sudden disconnection.

Difficulty in listening to a caller when receiving a call

Check if the headphones are connected to the Bluetooth® device.
Verify if the Bluetooth® mode is enabled on your device.
Check the volume level on your Bluetooth® device.
If used in auxiliary mode, verify that the audio cable is properly connected to the headset.

Care and maintenance

HEADSET DEVICE

Always unplug the product from the charger before cleaning
It is recommended to clean the product by wiping with a dry soft cloth. The cord may only be dry-dusted.

BUILT-IN BATTERY CARE

This product is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.
The battery can be charged and discharged hundreds of times, but will eventually wear out. Do not leave a fully charged battery connected to charger,since overnight charging may shorten its lifetime.
Unplug the charger from the electrical plug and product when not in use.
If left unused, a fully charged battery will lose its charge over time.
Leaving the product in hot or cold places such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the battery.
Always try to keep the battery between 15 and 25 degrees Celsius (59 and 77 degrees Fahrenheit). A product with a hot or cold battery may not work temporarily, even when the battery is fully charged.
Charge/power the headset according to the instructions supplied with the product

Technical specifications

Advanced audio characteristics (not user-configurable)

Range estimate is based on an area free and clear of obstacles and interference, and within the line-of-sight between both Bluetooth® 5.0 devices

First time charge should take 4 hours, thereafter 3 hours.

It depends on the volume level and type of audio files being played

Precautions

Do NOT drop, hit or shake the device.
Never try to disassemble, repair or modify the headset yourself, or push objects of any kind into the product, as this may cause short circuits which could result in a fire or electric shock.
None of the components can be replaced or repaired by users. Only authorized personnel may open the product.
This product is not a toy-never allow children to play with this product and always store the product out of reach of children.
Protect the cords from being damaged or pinched.
Discontinue to use the product if it overheats, has been dropped or damaged, exposed to water or if it has a damaged cord or plug.
Do not use cleaning products that contain benzene, solvents or alcohol.
Do NOT expose headset to excessive heat or to direct sunlight for long periods of time.
Do NOT store the device in a place with high humidity or dust.
Do NOT place heavy objects on top of the headset.
Do NOT use near a microwave oven or wireless LAN products

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Costumer Support

KlipXtreme® is a registered trademark. All rights reserved. The Bluetooth® word mark is owned by Bluetooth SIG, Inc. GOOGLE is the registered trademark of Google, Inc. SIRI is the registered trademark of Apple, Inc. Klip Xtreme is not affiliated with or endorsed by these companies. Other trademarks and trade names are those of their respective owners. Any mention of such is only intended for identification purposes, and is not to be construed as a claim to any rights pertaining to, sponsorship by, or affiliation with, those brands. Made in China.