JAMARA 460865 Ride-On Mini Quad Runty Kids Toys Instructions

: June 4, 2024
: JAMARA

Table of Contents

General information
Parts
Troubleshooting
Documents / Resources

460865 Ride-On Mini Quad Runty Kids Toys
Instructions

No. 460865, red
No. 460866, blue
No. 460867, white
No. 460865, pink

General information

JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this is due to improper operation or handling errors. The Customer alone bears full responsibility for
the proper use and handling, including without limitation, the assembly, the charging process, the use, and the choice of the operation area. Please refer to the operating and user instructions, which contain important information and warnings.

Suitable for children over 24 months!

Before playing, remove all protective films from all parts
This product is not intended for use by individuals (including children) with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge.
Due to its top speed, this toy is not suitable for children under 24 months!
Minimum age: 24 months
Maximum weight: < 25 kg
Before assembly
Adult required for assembly. Keep children away while assembling.
Tools (not included) needed for assembly: Screwdriver.

Certificate of Conformity
Hereby JAMARA e.K. declares that the products „Runty Mini Quad 6V, No. 460865, No. 460866, No. 460867, No. 460868“ comply with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU and 2009/48/EC. The full text of the EU Declaration of Conformity is available at the following Internet address: www.jamara- shop.com/Conformity
Read the complete instructions and security instructions carefully before using the model.

To prevent accidents and injuries, DO NOT leave your Child unattended during the operation of the vehicle. Never let your Child out of your sight while driving a vehicle.

DO NOT use the vehicle on public roads or places or other dangerous locations. ONLY operate the Ride On Car in places such as private parking, private land, or other safe locations. Make sure that no person or animal is endangered.
The vehicle has no brake or parking brake. Do not operate the vehicle uphill or downhill, and secure it when parking.

DANGER

For safe driving, you should make sure that your Child understands and adheres to the following rules:
– Always sit tight, do not get up during the ride.
– Never take additional Children for a ride. (The vehicle is only suitable for 1 person)
– Hold tight.
– Never drive without shoes.
– Never drive in the dark.
Keep hands, hair, loose clothing, and any other item away from any rotating parts.
The Model should not be used in rooms or halls with high humidity, in the rain, or on wet surfaces. Risk of malfunction or damage to electronics and housing.
The model is not water- or splash-proof. Only operate on asphalted surfaces (such as paving stones). The model is not suitable to be operated in grass or loose soil.

Box content:

Model
Battery pack
Charger 230 V
Assembly tool
Instructions

Parts

JAMARA 460865 Ride On Mini Quad Runty Kids Toys - fig
1

Nut	Washer	Screw	Fender
Wheel	Transmission	Dash	Instruction
Handlebar	Chassis	Seat	Lock seat
Charger	Steering shaft	Rear axle	Shaft sleeve
Accessory package	Battery cover	Battery

Required tool: Screwdriver

JAMARA 460865 Ride On Mini Quad Runty Kids Toys - fig
3

Front axle
Fix the steering levers with the axle plate. Push a bolt through the axle plate and through the steering levers and secure with a nut. Tighten the bolt with a screwdriver (not included in the scope of delivery) and the socket wrench (A).
Mounting the rear wheels
First mounting the rear wheels. Fit a washer (2), 2 shaft sleeves(16), and a washer (2) into the axle. Fit a wheel (5) and a washer (2) onto the rear axle (15). Fit a nut (1) to the end of the axle and tighten with a wrench (A). Antriebsrad Install the gear (6) on the right side of the rear axle (15). Fit a wheel (5) on the axle and secure it with a washer (2) and a nut (1). Tighten the nut with a wrench (A).
Mounting the front wheels
Fit a washer (2) and a front wheel (5) onto the front axle. From the outside fitted a washer (2) and secured with a nut (1) gesichert. Tighten the nut with a wrench (A). Repeat this on the other side.
mounting the handlebars, the armature, and the ram protection
1. Fut the handlebars on the steering column Align it so that the holes on Match the handlebars with those on the steering column. Slide a threaded screw through the hole and secure it with a nut. Now insert the steering column through the Hole in the body and press until it clicks into place.
2. After pushing the handlebars through the car, turn the car around and put the handlebars through the eyelet on the steering linkage. Secure with a washer and nut.
3. Position the fitting on the body until it engages
4. Place the front bumper on the body in position and secure it with 4 screws.
Battery connection
Connect all connectors as shown. Only plug matching connectors into each other and be sure not to reverse the polarity. Make sure the red wire is well connected with the red terminal on the battery, and the same as the black one. Connect the motor cables (1) together. Cover the battery compartment with the cover.
Assemble the seat
Place the seat in the position and save the seat with the seat lock.
Functions
A ON/OFF Switch
By pressing the ON / OFF switch (1) is the model on or off
B Sound button
C Switch button
Forward: Press the switch button on the▲ position.
Press the gas pedal, the model drives forward.
Backward:
Press the switch button on the ▼ position.
Press the gas pedal, the model drives backward.
IMPORTANT! Always stop the vehicle when changing the speed or direction to avoid damage to the gears and motor.
D Accelerator pedal
Press the accelerator pedal to move the model. Remove the foot from the accelerator pedal to stop the model
Charging your vehicle

The POWER SWITCH must be turned in OFF position when charging.
Plug the charger port into the input socket and plug the charger plug into a wall outlet.
The battery will begin charging.
The charge time is 10 hours.
Do not charge the battery more than once within 24 hours
Charger and battery heat up during the charging process

Attention!

Let the model cool off sufficiently after each use before putting it back into operation. When using an additional battery let it cool off for minimum 15 minutes until the model is operated again. Overheating can damage the electronics or may result in fire.
Always disconnect the model from the charger immediately after charging. Always disconnect the charger from the power supply immediately after disconnecting the model. Inserting the rechargeable model or charger after charging will result in damage to the model, charger, or the power supply (fire hazard).
Use the charger only in dry rooms.

Only use in direct supervision of an adult!
To control the vehicle a minimum skill level and caution is needed. Make sure you are familiar with the operation of the model and its characteristics. The model is heavy. This is an increased risk of injury and damage in the event of loss of control. Avoid any kind of intentional or unintentional collisions with objects or hazards to persons.
Danger!
Always switch off the model immediately after each use. Immediately after each use, the batteries should be disconnected from the model. The batteries can be deeply discharged by leaving them switched on accidentally or leaving them plugged in. Due to deep discharge, the batteries lose power or can be damaged to such an extent that charging or discharging is no longer possible or the batteries can self-ignite during the charging or discharging process (fire hazard). Never attempt to charge or discharge deeply discharged batteries. The voltage of a battery should never fall below 5,74 volts to avoid a deep discharge. The fully charged battery has a voltage of approx. 6,5 volts. After use, the intact batteries should be fully charged immediately after a cooling phase of min. 10 minutes ut at the latest after 12 hours to avoid a subsequent deep discharge by self-discharge. If the batteries are not used or stored for a longer period of time, the batteries should be checked for voltage (min. 6,2 volts) or damage at least every 3 months and recharged or disposed of if necessary.

Troubleshooting

The vehicle does not run
● The battery may be low on power.
After each use, or once a month minimum, charge the battery. Do not leave the battery on the charger for more than 10 hours.
● Thermal fuse has tripped.
The vehicle is equipped with a self-resetting fuse. When the vehicle is overloaded or operated incorrectly; the self-resetting fuse will be cut off for 5 – 20 seconds before becoming operational again. The self-resetting fuse is under the seat Cut off the power, and follow these guidelines:
– DO NOT overload the vehicle, Maximum weight allowed: 25 kg
– DO NOT tow anything behind the vehicle.
– DO NOT drive up steep slopes.
– DO NOT drive into fixed objects, which may cause the wheels to spin, causing the motor to overheat.
– DO NOT drive in very hot weather, components may overheat.
– DO NOT tamper with the electric system, Doing so may create a short circuit, causing the fuse to trip.
The battery will not recharge
● Battery connector or adapter connector is loose.
Make sure the battery connector and adapter connector are firmly plugged together.
● Charger is not plugged in.
Make sure the charger is plugged into the wall outlet and the power flow to the outlet is on.
● Charger is not working.
Is the charger warm while charging? If not, the charger may.
The vehicle does not run very long.
● Battery may be undercharged.
You may not be charging the battery long enough. After each use, or once a month minimum, charge the battery. Do not leave the battery on the charger for more than 10 hours.
● Battery is old.
The battery will eventually lose the ability to hold a charge. Depending on the amount of use, and varying conditions, the battery should operate for one to three years. Replace the battery with a new one.
Battery buzzes or gurgles when charging.
● This is normal and not a cause for concern. It may also be silent when charging, which is also normal.
Charger feels warm when recharging the battery.
● This is normal and not a cause for concern.

All rights reserved. Copyright JAMARA e.K. 2021
Copying or reproduction in whole or part, only with the expressed permission of JAMARA e.K.
Service centre

Reitter Modellbau Versand
Patricia Reitter
Degerfeldstrasse 11
72461 Albstadt
Tel 07432 9802700
Fax 07432 2009594
Mail info@modellbauversand.de
Web www.modellbauversand.de
DE

| Bay-Tec
Martin Schaaf
Am Bahndamm 6
86650 Wemding
Tel 07151 5002192
Fax 07151 5002193
Mail info@bay-tec.de
Web www.bay-tec.de
DE
---|---

PenTec s.r.o.
distributor Jamara for Czech Republic and Slovakia
Veleslavínská 30/19
CZ -162 00 Praha 6
Tel +420 235 364 664
Mobil. +420 739 075 380
Mail servis@topdrony.cz
Web www.topdrony.cz
CZ

|

JAMARA e.K.
Manuel Natterer
Am Lauerbühl 5
DE-88317 Aichstetten
Tel +49 (0) 75 65/94 12-0
Fax +49 (0) 75 65/94 12-23
Mail info@jamara.com
Web www.jamara.com
EU

JAMARA e.K.
Inh. Manuel Natterer
Am Lauerbühl 5 – DE-88317 Aichstetten
Tel. +49 (0) 75 65/94 12-0 – Fax +49 (0) 75 65/94 12-23
info@jamara.com ● www.jamara.com
Service – Tel. +49 (0) 75 65/94 12-777
service@ jamara.com