Mintion BEAGLE V2 3D Printer Camera User Manual
- June 12, 2024
- Mintion
Table of Contents
Mintion BEAGLE V2 3D Printer Camera
Product Information
This device is designed to comply with part 15 of the FCC Rules, ensuring that it operates within the specified limits of electromagnetic interference. It is also compliant with FCC radiation exposure limits for use in an uncontrolled environment.
FCC Compliance
According to FCC regulations, this device must meet the following conditions:
- It should not cause harmful interference to other devices.
- It must accept any interference received, even if it causes undesired operation.
- Any changes or modifications made to the device, without the explicit approval of the responsible party for compliance, may void the user’s authority to operate the equipment.
Radiation Exposure
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This ensures compliance with FCC radiation exposure limits and helps maintain a safe distance from potentially harmful radiation.
Product Usage Instructions
- Ensure that the device is placed at least 20cm away from your body during installation and operation.
- Do not make any unauthorized changes or modifications to the device, as this may void your authority to operate it.
- When operating the device, if you experience any interference with other devices, try adjusting the positioning or distance between them.
- If you encounter any issues with undesired operation caused by interference, contact the responsible party for compliance for further assistance.
PACKING LIST
CAMERA INTRODUCTION
-
IR-Cult Sensor
-
Focus Ring
-
Reset Button
-
Microphone
-
Lens
-
Data Port (With Cover)
-
Tripod Mount (size 1/4″-20)
-
Speaker
-
USB Socket
-
Power Socket
-
Micro SD Card
-
Printer Indicator < Flashing Red: Per ten reconnected
-
WiFi Indicator < Solid Green: WiFi connected Flashing Green: WiFi disconnected
INSTALLATION BRACKET
Assemble the gimbal and tripod
ADD THE CAMERA
Download Beagleprint. Register an account and log in.
Power up the Camera until you hear the voice prompt “Camera is ready for Wi-Fi configuration”, (expected within 1 minute). Click + to add the camera and select the “QR Scan Configuration” for WiFi connection.
FIRST USE
Click on the device on the device page to enter the device control page and set the printer model. Click on the corresponding space to perform the operation. Use a USB cable to connect the Camera to the printer USB port. After the printer is started (when the printer screen is operable, the printer is considered to have completed the startup).
Connect the Camera by clicking the “connect” button to connect the printer. After successful connection, the button will change to “Disconnect”. Also, Print off only indicates that there is no current printing process. Click “+”, upload the G-code file, and click “(print icon]” to start printing. If your printer is an automatic bed leveling printer, please insert M420 S1 below G28 in the Star Gcode section of your slicing software to enable automatic bed leveling compensation.
On the dashboard page or device page, you can monitor the progress of the printer’s printing task and pause or stop the printing operation.
WEB PAGE
In the Beagleprint app, click on Settings, find the IP address in the Camera
information page, and use a browser to enter it to access the login page
.
The Camera is connected to the same network (same subnet) as the computer/tablet/phone using the browser. Once logged in successfully, you can connect to the printer via the “Connect” button in the upper left corner. *If it says “Disconnect, it means the camera has been connected to the printer.
Then, on the Dashboard page, find “Printable Files List”, click Upload”, select the G-code file to be uploaded, and click the to start printing. If your printer is an automatic bed leveling printer, please insert M420 S1 below G28 in the Star code section of your slicing software to enable automatic bed leveling compensation On the Dashboard page, find the ” Status & Control” page, where you can monitor the printing progress, such as the number of layers and height, and pause or cancel printing as needed.
CUSTOMER SUPPORT
Please visit the Mintion official website for more machine usage and maintenance tutorials:
Join our Facebook group to communicate with us, our users, fans, and other members through Facebook
FB Group: Mintion Official Group
If you need human assistance, you can email:
support@mintion.net and we will contact you
within 24 hours.
ATTENTION
Please DO NOT cut off the power of the Beagle V2 camera when it’s connecting
to the 3d printer on printing; DO NOT disconnect the camera from the printer
when it is connected to the printer and transmit gcode files through the
camera for printing. Otherwise, it will cause printing failure and damage the
camera’s firmware. In this case, the camera cannot work typically; this
problem is the user problem, not a quality problem. Hence, please ensure that
you cannot disconnect the camera from the power supply and the USB cable
connected to the printer when the camera is working, and the 3d printer is
printing. The Beagle camera only supports one printer connection for control,
allowing four users to simultaneously log in and access the camera (including
mobile phone and computer users). Therefore, please make sure it’s securely
accessing the device to prevent bad guys from accessing the camera or printer
and the environment to cause damage. At the same time, we recommend that you
do not let the 3d printer perform the 3d printing work completely unattended.
Please come to the printer and watch the real printing progress of the printer
regularly to prevent further deterioration of the situation when an abnormal
condition occurs. This camera shortens the distance between the user and the
printer. The user is obliged to ensure the reasonableness and legality of the
use of the product and avoid infringement of third-party rights, including but
not limited to publicity rights, intellectual property rights, data rights, or
privacy rights. At the same time, since the customers’ use and storage of this
camera are beyond our control, we are not responsible for possible personal
injury or property loss.This manual is for reference only. In any case, we
have the right to modify and improve it without notifying users. If you want
to know the latest instruction manual, you can go to the official website for
more information
FCC
FCC WARNING STATEMENT
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communica- tions.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:ealer or an experienced
radio/TV technician for help.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
FCC RADIATION EXPOSURE STATEMENT
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co –
located for operating in conjunction with any other antenna ortransmitter.
SPECIFICATION
Model | Beagle V2 |
---|---|
Video Compression | H.264/MJPEG |
Video Resolution | 1080P |
Night Version | Yes |
Frame Rate | Up to 25fps |
Auto Time-lapse Video | Yes |
WiFi Connectivity | Supports 2.4GHz/5GHz |
Compatibility | Marlin 3D Printers |
Connect to Printer | USB Cable |
Files Storage | Micro SD Card |
Power Source | Plug-in |
Lens Adjustable | Manual Knob |
1/4″ Screw for Tripod | Yes |
This device complies with part 15 of the FCC Rules. Operation is subject to
the
following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off andon, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
SHENZHEN MINTION TECHNOLOGY CO., LTD
- Distribution: sales@mintion.net.
- Support: support@mintion.net.
- FB Group: Mintion Official Group
- www.mintion.net.
- Beagle V2 Firmware Download Beagle V2 camera supports online upgrade
- Beagleprint App Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>