SIERRA 053701-10C Fuel Tank Combo Package Instruction Manual
- June 15, 2024
- SIERRA
Table of Contents
053701-10C
Ultra 6 International
All-in-1 Fuel Tank Combo Package
Outboard Engine Type: Universal
Installation Manual
053701-10C Fuel Tank Combo Package
Service Office Dometic
1 Sierra Place
Litchfield, IL 62056-3029
877-663-8396 (option 1)
Service center and dealer locations
Visit: www.sierraparts.com
This product fits the following two-prong engines: Johnson/Evinrude (most
models), Mercury (1998 and newer), Yamaha (most models and 1997 and older
Mercury)
Scope of Delivery
| Part | Quantity |
|---|---|
| Stainless steel hose clamp | 1 |
| 1/4 in. NPT tank connector | 1 |
6 ft universal fuel line assembly with fuel line to quick disconnect tank
connector| 1
Johnson/Evinrude engine fitting (red)| 1
Mercury engine fitting (white)| 1
Yamaha engine fitting (blue)| 1
6-1/2 gal CSA and ISO 13591 compliant portable marine fuel tank with sight
gauge.| 1
Recommended Tools
Flat-bladed screwdriver| Leak detection fluid or a solution of diluted dish
washing soap
---|---
Lubricant
Open end wrench|
Installation
WARNING: FIRE AND/OR EXPLOSION HAZARD. Failure to obey the following warnings could result in death or serious injury:
- Do not use the product leaks if are detected. Failure to obey this warning could result in death or serious injury.
- Check your fuel system for leaks and wear every time before use.
- Disconnect the fuel line assembly from the tank when it is stored or not in use.
1 Components
1 Primer bulb
2 Hose barb
3 Quick disconnect fuel line fitting
4 Yamaha engine fitting (blue)| 5 Mercury engine fitting (white)
6 Johnson/Evinrude engine fitting (red)
7 1/4 in. NPT tank connector
8 Stainless steel hose clamp
---|---
- To avoid cross threading, carefully thread the 1/4 in NPT tank connector with white sealant on its threads by hand in a clockwise motion until it is seated in the tank.
- Check for leaks by spraying or brushing a thin solution of leak detection fluid on the connection and watching for air bubbles.
- Tighten the connection, if needed.
- Connect the universal quick disconnect fuel line fitting to the tank connector.
- Check to make sure the flow arrow on the primer bulb points to the engine.
- Choose the correct fuel line connector for the engine model and year.
- Slide the stainless steel hose clamp onto the fuel line hose.
- Lubricate the hose barb and push the correct fuel line connector into the fuel line hose.
- Slide the stainless steel hose clamp towards the hose barb until it is one full width of the clamp away from the fuel line connector.
- Tighten the screw on the stainless steel hose clamp.
Form No. 4445103952 2023-03-28
©2023 Sierra International LLC
Documents / Resources
|
SIERRA 053701-10C Fuel Tank Combo
Package
[pdf] Instruction Manual
053701-10C Fuel Tank Combo Package, 053701-10C, Fuel Tank Combo Package, Tank
Combo Package, Combo Package, Package
---|---