TWICE CANDYBONG INFINITY User Guide

TWICE CANDYBONG INFINITY

Batteries replacement

If you remove the lower battery cover by turning it off, the internal battery socket will come out. Insert and install three batteries according to the correct polarity of the battery socket.

Touch the edge of the TOUCH PAD.

Using the button

• It takes 2~ 3 seconds to set the touch sensitivity after turning on the power.

• Normal Mode: Press the button to change the LED mode in order of
  

• Central Control Mode: Inserting AAA size 3 batteries into Light stick, enter the concert hall and press the button once to automatically control it. (While it is being controlled at the concert hall, you cannot change the color by pressing the button.)

(!) Caution

If the battery socket is inserted upside down, the light stick may not work and the terminal of the socket may be damaged.
Use AAA alkaline batteries. Do not use manganese batteries.
Insert new alkaline batteries for each performance.
Do not use new and used batteries together.

Warranty of product

• This product is manufactured through strict quality control and inspection process.
• The warranty period is six months from the date of purchase. If the service is determined to be paid customer service even it is within the guarantee period, the service charge will be applied for C/S. C/S is not available if the warranty period has been passed.
• Please present this certificate and purchase receipt when you ask for C/S. (If purchased online, attach the purchase statement.)
• The customer service application fee should be paid by the customer. (Round-trip shipping)
• The warranty is valid only in Korea.
• If there are any defects or foreign substances on the appearance of the product, you can get exchange or return within 7 days after purchase only for unused products
• Even within 6 months of warranty period, product failures caused by normal abrasion, customer carelessness and negligence, natural disaster, disassembly or modification are excluded from the C/S list.
• For problems caused by the use of products or parts not purchased from official stores, Even if it is within warranty period, it will not be subject to warranty
• The outer box of this product is designed for product protection, so exchange/return is not possible due to minor scratches or discoloration.

Contents of warranty

Malfunction C/S

• Defective operation due to PCB failure.
• Defective operation due to switch contact failure.

The battery socket paid C/S

• The battery socket malfunction due to breakage or corrosion.
• The battery socket can be paid for after the warranty period.

Caution

• May contain small parts with risk of suffocation.
• Do not put into water.
• Do not look at LED part when the light stick is on
• The batteries should be inserted with the correct polarity.
• Do not use used batteries with new batteries.
• Do not store in direct sunlight, high temperature and humid place.
• If the product is damaged, please stop using it.
• Do not disassemble or remodel.
• Remove the batteries when the product is not in use or discharging.
• If the battery power is low, the LED stops working and then goes out. Then change it for new alkaline batteries.
• The software version and function of the product may vary depending on the manufacturer’s circumstances and change without prior notice to the user.

Consumer mistake part that C/S is impossible

• In case of breakage of mechanism and circuit parts due to external impact.
• In case of circuit breakage due to use of bad batteries.
• In case of the product is put in water during operation, or the inside of device is damp after use in rainy weather.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with RF exposure requirement.

Customer Support

Address: 430 W 15th Street, 7th floor New York, NY 10011
FCC ID : 2BA9F-TWICE03V
Freq : LE : 2400 – 2483.5 MHz 434MHz Rx Only

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>