LandStar r604 American Landmaster Instructions

LandStar r604 American Landmaster

Product Information

Specifications:

• Product Name: LandStar8
• Version: 8.01
• Release Date: April 2024
• Operating System: Android

Frequently Asked Questions

Q: What should I do if the installation process stalls?

A: If the installation process stalls, try restarting the installer or check for any error messages.

How to: Install, Update and Provision LandStar

Before Installing LandStar8

Check for Android Operating System Updates
Make sure your Android device’s Operating System is fully updated. From Settings:

Settings > System > Software updates > System update > Check for updates

3-button navigation
Enabling soft buttons on the bottom of the screen will help navigation through large entry forms as there will be a dedicated back and a key to collapse the keyboard while in the Survey modes.

Install the Google Keyboard GBoard

The Google keyboard GBoard is highly recommended for use with LandStar. GBoard can be downloaded and installed from the Google PlayStore if the device has GMS (Google Mobile Services).
Play Store > search for Gboard > Install Gboard – the Google keyboard
Once installed follow the instructions to select and enable Gboard as the default keyboard.
When the keyboard is shown, you can change the Gboard preferences by clicking the Settings gear:

Gboard keyboard tricks
When entering a field that is primarily numeric, a numeric keyboard like this may be shown:

Click on Preferences then

• Enable Number row
• Enable Long press for symbols

If you need to click a letter (like ‘m’ to switch a measurement to Meters), click on the space button: and the keyboard will expand to alphanumeric entry:

LandStar8 has a dedicated text entry box for Codes, however no dedicated entry box is available for Descriptions:

Click and hold the m button: to enter a question mark ?. Everything entered after a ? is placed in the Point Description.

Download and Install LandStar8 from the iGage website

Direct download from iGage.com

To directly download the latest iGage verified version, click on this link: https://igage.com/out/LandStarDistribution/LatestVersion/index.htm then download the .apk file found in the folder.
You may also open a browser on the Android device and navigate to www.iGage.com:

Find the link to Out on the gray top tool bar and click on it.
A web folder will be shown:

The .apk file in this folder will be the latest iGage approved version. Click on it.
The file will begin to download:

After the file downloads:

Click on Open.
If this message is displayed:

Click on Settings:

Slide the Allow from this source to the right. The installer should re-start automatically, if not click on back.

Click Install. Then wait while LandStar is installed and deployed.

Finally, when the install completes:

Click on Open. Allow all requested permissions:

Install the USA Localization package
When prompted to download localization package files:

Wait while LandStar initializes:

The initial splash screen may take over a minute to complete.
Choose a menu structure:

While the Simple style is simple, it does not match any of the descriptions in the User Manual or this FAQ. It might be best to use the Classic style while learning to navigate LandStar. Click the Do not confirm next time checkbox, then click OK.

Click on Yes.

Click on the appropriate country United States.

Confirm the package download, click Yes:

It will take several minutes to download the package. The package contains special projection zones, GEOIDS and initial local settings.

Click Close at the screen bottom to return to the main menu.

Create a New project with your local state plane zone

After the download and installation is complete, a green checkmark will display next to the package. Click Close (at the bottom) to continue.

Click the Projects button,

Click the New button at the bottom to create a new project:

Enter a Name for the first project, then click the Coordinate system more button:

Click on Pre defined:

Set Region = United States (or your local), Area = NAD83(2011), then drag up / down to find the appropriate zone for your project. Additional information on Coordinate systems can be found in the User Manual.

NOTE: If you are in a special state or county zone, click on:

then choose a specific special area:

With the correct zone selected:

Important Note: NEVER select Broadcast RTCM (1021-1027)!

Click Next.

Drag over to the right-column Vert. adjustment and select a Geoid file:

Add a GEOID to your default zone
Change the Coordinate system Name to include a reference to the selected Geoid:

Click OK.

Set default project settings

Click on Project settings > then Units >:

At a minimum, consider setting Azimuth display mode = Bearing, Horizontal and Vertical distance = iFeet/USFeet, Area unit = Acres, Volume unit = Cubic Yards, and Station = K0+00.00.
Click Back, then spend a few minutes looking through the Decimals settings and GNSS settings.

Additional information on Settings can be found in the User Manual.
Configure everything as you would like the new job defaults to be, then click on: Save as default so future jobs will share these settings.

Finally, click Back, then OK. The new project is available to work on.

License LandStar 8 so it can connect to devices

LandStar 8 will run in demo mode until it is activated. Most functions other than a connection to a GNSS receiver or a Total Station are available in the unlicensed Demo mode. It is possible to use an unlicensed demo copy to process Visual surveys and import and export work products. 30-day trial licenses are also available by self-service, see the 30-day trial section below. To permanently activate LandStar 8, buy a Registration Code (formally called a Precode) from an authorized dealer. Starting April 2024, codes purchased from iGage will include a QR code which will automate code entry:

A purchased Registration Code can be:

used on one device at a time deployed on a lifetime total of 5 devices freely transferred between the 5 devices an unlimited number of times
The Deployment Backup and Restore tool described in the User Manual makes transferring entire deployments by a single compressed file possible.
Click on the profile head at the top-left corner to display the System settings panel. Drag the panel up:

Click on Activate software/About at the bottom of the left-side menu.

Click on the License tab:

The licensing menu will be shown:

From this menu you can:
Request a 30-day Free trial.
Add purchased (Pre-code) activation codes for GNSS and TPS, or GNSS+TPS.
Perform an offline activation.
Release (Unbind) the activation code which allows transferring to another device.

Request a 30-day trial
Make sure your device is connected to the internet. Click:

And follow the onscreen instructions. A device may only have 30-day trial, if you attempt to obtain a 2nd trial, this message will be shown:

Add purchased activation code
Make sure your device is connected to the internet. Click:

The Activation code menu will be shown:

Either type in your activation code, or click the scan button:

And scan the QR code provided on the license certificate.

Finally click the Activate button:

The appropriate modules will be permanently activated:

An email detailing the activation will be sent to the registered address:

Perform offline activation
Offline activations allow permanent codes to be installed on a device without an internet connection.
Click on:

The Offline activation menu is shown:

Use the copy button to copy the Equipment ID into the clipboard, then send the EID to your dealer. They will request an Offline activation code which will be delivered as a 180-character code with a scannable QR code.
Scan the QR code then click Register and the license will be applied to the Android device.

Release activation code
A LandStar license can only be activated on one device at a time. A purchased license can be transferred to a total of 5 (five) devices over the registration code’s lifetime. Please be careful when using transfers to not needlessly waste device registrations, only five are possible.
If a device is lost or damaged with the code attached, your dealer can help release the license for installation on a replacement device. The release

Operating System Optimizations

After installing LandStar, make the following operating system changes to prevent LandStar from

could take several days, you can use a Free demo activation for 30-days on the replacement device.
Consider using a demo code to evaluate a new device.

IMPORTANT
Before transferring LandStar to a new device, consider backing up EVERYTHING to a single Deployment backup file. These Deployment backups include all settings, instrument profiles, existing jobs.
See Deployment Backup / Restore in the User Manual.

Make sure your device is connected to the internet. Click:

The Release activation menu will be shown:

Enter or Scan the correct Activation code that is currently installed on the device.

The current code is not prefilled to prevent unauthorized license transfer. The Email must match the registered email address.

Finally click Release to remove the license from the current device.
An email listing the release, with the full registration code will be sent to the registered email address:

freezing or losing permissions when running in the background, or after a few weeks of non-use.

Click and hold on the program icon on the desktop, then click the App info button:

Under Permissions, disable Pause app activity if unused:

This will prevent the operating system from automatically removing permissions and cached files if LandStar is not used regularly. The removal of some permissions may result in LandStar being unable to start.
Under Mobile data & Wi-Fi enable background usage of mobile Background data and Unrestricted data usage:

Under App battery usage change battery usage to Unrestricted. This allows LandStar to continue to communicate with receivers and devices when another application is opened or while using the phone:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>