ZEISS CT47LC VISCOJECT-BIO 2.2 Injector Set Instruction Manual
- June 12, 2024
- Zeiss
Table of Contents
Instruction Manual VISCOJECT-BIO 2.2 Injector Set
Handling instructions for
CT47LC, CT37A, AT LISA 801 and CT SPHERIS 203
VISCOJECT-BIO 2.2 Injector Set
Preparing the compatible ZEISS IOLs for use.Place a small amount of OVD in
the cartridge tip.
Place a line of OVD in each channel of the cartridge.
Do not touch the tip of the cartridge.Place the lens in the center of
the open cartridge. Push down on the edges of the optic to ensure that the
optic
haptics are positioned under the ledges of the cartridge.Maintain the IOL in place with the folding forceps while
folding the cartridge. Close the cartridge until you hear a click.Place the cartridge into the injector and move it forward as
far as it will go. The lens is ready for implantation.
Carl Zeiss Meditec recommends the use of ZEISS OVDs.Place the bevelled edge downward and gently push the plunger to inject the IOL.
en-OUS_32_022_0147I CZ-XII/2021
The contents of the brochure may differ from the current status of approval of
the product or service offering in your country. Please contact our regional
representatives for more information.
Subject to changes in design and scope of delivery and due to ongoing
technical development. VISCOJECT is a trademark of Medicel (CE 0482).
© Carl Zeiss Meditec AG, 2021. All rights reserved.
0297
CT 47LC
CT 37A
AT LISA 801 0459
CT SPHERIS 203
Carl Zeiss Meditec AG
Goeschwitzer Str. 51–52
07745 Jena
Germany
www.meditec.zeiss.com/iol
www.zeiss.com/med/contacts
Carl Zeiss Meditec SAS
27 Avenue Paul Langevin
17180 Perigny – France
Mailing address:
Avenue Paul Langevin, BP5
17053 La Rochelle – Cedex 9
France
Documents / Resources
|
ZEISS CT47LC VISCOJECT-BIO 2.2 Injector
Set
[pdf] Instruction Manual
CT47LC, CT37A, AT LISA 801, CT SPHERIS 203, CT47LC VISCOJECT-BIO 2.2 Injector
Set, VISCOJECT-BIO 2.2 Injector Set, 2.2 Injector Set, Injector Set, Set
---|---