ama ARTS A2701-03801 Round Wrangler Side Mirrors Doorless Mirrors Installation Guide
- June 1, 2024
- ama ARTS
Table of Contents
ama ARTS A2701-03801 Round Wrangler Side Mirrors Doorless Mirrors
Specifications
- Product Name: Wrangler Mirror Kit
- Model Compatibility: Wrangler JK, JKU, TJ
- Material: Billet aluminium
- Hardware : M835mm bolts, 5/16-181 bolts
Product Usage Instructions
Installation Steps
- STEP 1: Assemble the right mirror arm, billet bushing, and mounting bracket.
- STEP 2: Install the bolt and flat washer, and tighten the bolt without over-tightening. Adjust as needed.
- STEP 3: If the original bolts are not long enough, use substitute bolts. Remove the original bolts and washers, then fix the bracket on the flat side.
- STEP 4: Attach the mirror to the flat side of the arm using the provided hardware.
- STEP 5: Repeat steps 1-4 to install the other side mirror.
Mirror Adjustment
Adjust the mirror head into the desired position by tightening three screws
[A]. Do not over-tighten; the mirror should be tight but adjustable if needed.
IMPORTANT
- Please read the installation instructions carefully before you start.
- For your safety and to ensure a satisfactory installation, please complete all the installation steps in the order shown below.
SKU· A2701-03801
PRODUCT INFORMATION
INSTALLATION STEPS
- Assemble the right mirror arm③, billet bushing⑨ and mounting bracket⑤.
- Install the bolt ⑥ and flat washer⑧, tighten the bolt, and don’t over-tighten them, you can adjust them as needed.
- Remove two original flush mount torx head bolts and washers just in front of door hinge.
- Use the two original bolts and washers just removed to fix the bracket on the flat side.
- Remove two original flush mount torx head bolts and washers just in front of door hinge.
- Use the two original bolts and washers just removed to fix the bracket on the flat side.
- Remove two original flush mount torx head bolts and washers just in front of door hinge.
- Use the two original bolts and washers just removed to fix the bracket on the flat side.
- Attach mirror ① to flat side of arm ③ using the bolt ⑩, flat washer ⑧ and lock washer .
- Adjust the mirror ① head into the desired position, tighten three screws [A], DO NOT over-tighten.The mirror ① should be tight but able to be adjusted if needed.
- STEP 7: Repeat steps 1-6 to install the other side.
If you have any questions, please feel free to contact us. Email: qmparts@outlook.com
FAQ
Frequently Asked Questions
- Q: What should I do if the original bolts are not long enough?
- A: In such cases, please use substitute bolts provided in the kit to ensure proper installation.
- Q: How can I contact support for further assistance?
- A: For any questions or assistance, please feel free to email us at qmparts@outlook.com.
Read User Manual Online (PDF format)
Loading......