HBNKH H-R510PRO Intelligent Digital Voice Recorder User Manual
- June 12, 2024
- HBNKH
Table of Contents
HBNKH H-R510PRO Intelligent Digital Voice Recorder
Thank you!
Thank you for choosing the voice recorder that we have specially designed for you. We believe the product will bring convenience and pleasure to your work, study and life.
Chapter 1 Introduction of product
Thank you for choosing the voice recorder that we have specially designed for you. We believe the product will bring convenience and pleasure to your work, study and life.
Diagram of product functions
Parameters of product
Screen:0.96 inches, 80160TFT screen
USB version: USB 2, supports USB 3.0
Headphone output: double track headphone, 32ohm
Product memory: 4G, 8G, 16G, 32G(optional)
Battery capacity: 250mAh polymer lithium battery
Music format: MP3/WAV/WMA/APE/FLAC
Recording format: WAV
Frequency response: 20Hz~20KHz
SNR: greater than 88db
Distortion degree: less than 0.05%
Product size: 80 26 * 9mm
Product weight: 26g
Operation systems: Window 98, Window XP,Windows7, windows8, windows10,
MAC OS
Bit rate: WAV-512KBPS/1536KBPS/3072KBPS
Chapter 2 Start to use
Setting functions
Select the “Settings” icon on the main menu and the following options will show up.
- Language
- Date and time
- Brightness
- Backlight timer
- Set the timed shutdown
- Information
- Storage status
- Factory setting
- Update playlist:
- Power-on Password
Bluetooth
- Bluetooth mode
- Bluetooth on/off
- Paired device
- Available devices
- Device name
Recorder
- Recording library
- Recording bit rate:512 kbps/ 1536kbps/ 3072 kbps
- Noise co
- Recording scene:
Closure, Interview, Meeting, Station, Teaching
- Recording segment
- Voice-activated
- Recording monitor
- Timing recording
Folder
- Folder setting: Back to the main page, variable speed playback, repeat playback, bookmark, add to playlist, Equalizer
Music
- All songs
- Playing now/last played
- Artists
- Albums
- Favorites
- Setting of play mode: Back to the main page, variable speed playback, repeat playback,\ bookmark, add to playlist, Equalizer
FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has evaluated to meet general RF exposure requirement. The device can be used be in portable exposure without restriction.