CHOETECH TW-15W-01 15W Magnetic Wireless Charger Instruction Manual

CHOETECH TW-15W-01 15W Magnetic Wireless Charger

Getting Started

• Remove the product from the box.
• Remove any packaging from the product.
• Please retain all packaging after you have checked and counted all the parts and the contents against the list.

Package Contents

• Magnetic Wireless Fast Charger
• Bonus Magnetic Ring included for Android phones (compatible to wireless charging)
• Instruction Manual

Key Features

• Magnetic Wireless Fast Charger
• Magnetic wireless charger provides fast & efficient charging to your mobile devices
• Compatible to iPhones with Mag-Safe charging and also other Android phones with wireless charging capability
• With magnetic charging, charging is made easier
• Input: 9V/2A
• Output: Max 15 watts

Safety Instructions

• Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.

• Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit.

• Do not use the unit if it has been dropped or damaged in any way.

• Repairs to electrical equipment should only be performed by a qualified electrician.
  Improper repairs may place the user at serious risk.

• Do not use the unit with wet hands.

• Do not put objects into any of the openings.

• Keep the unit free from dust, lint etc.

• Do not use this unit for anything other than its intended use.

• Keep the unit out of reach of children.

• This product is not a toy

Description of Parts

INSTRUCTIONS FOR USE

1. Connect the Type-C input plug to the output of a Quick Charger [with output rating DC 9V/2A(18WMax.) – NOT INCLUDED].
2. Place your Mag-Safe compatible iPhone onto the Wireless Charging Pad, it would start charging your phone.
   If you are using Android phone which has wireless charging function, you can affix the bonus magnetic ring on your phone and use magnetic wireless charging.
   REMARK:
   a. If your iPhone model is compatible with wireless charging and you are unable to wireless charge, please remove your phone case and retry.
   b. Placement of some smart phones on the magnetic surface for wireless charging might need to be adjusted, in order for their internal components to make contact appropriately and begin wireless charging.

Care and maintenance

Read the following recommendations before using the device.

• Do not expose the device to liquid, moisture or humidity to avoid damage to internal circuits.
• Do not use abrasive cleaning solvents to clean the device.
• Do not dispose of the device to fire.
• Do not expose the device to contact with sharp objects as this will cause scratches and damage.
• Do not let the device fall onto the floor. The internal circuit might get damaged.
• Do not attempt to disassemble the device. No user serviceable parts.

Specifications

• Input: DC 9V/2A
• Output: Max. 15W
• Dimension (Charger plate only): Dia. 2.27” x 0.23” H
• Weight: ~1.6 oz

FCC Instructions

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.

NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This product generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>