iVIGA Faucet Bathroom Towel Bar Toilet Paper Holder Kit Instruction Manual
- June 12, 2024
- iVIGA
Table of Contents
- iVIGA Faucet Bathroom Towel Bar Toilet Paper Holder Kit
- Product Information
- Product Usage Instructions
- Technical Specification
- Cleaning Instructions
- How To Install Towel Bar
- How To Install Singe Robe Hook
- How To Install Towel Ring
- How To Install Tissue Holder
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
iVIGA Faucet Bathroom Towel Bar Toilet Paper Holder Kit
Product Information
| Product | Technical Specifications |
|---|---|
| Towel Bar | Length: 24 inches (609 mm) |
Extension: 2.7 inches (68 mm)
Mounting: Wall-mounted
Recommended Mounting Surface: Stud or concrete
Usage: Not intended for use as a grab bar or support bar
Cleaning: Use a soft damp cloth, do not use commercial or abrasive
cleaners
Single Robe Hook| Extension: 2.7 inches (68 mm)
Mounting: Wall-mounted
Usage: Not intended for use as a grab bar or support bar
Towel Ring| Extension: 2.7 inches (68 mm)
Mounting: Wall-mounted
Usage: Not intended for use as a grab bar or support bar
Tissue Holder| Length: 6 inches (152 mm)
Extension: 2.7 inches (68 mm)
Mounting: Wall-mounted
Usage: Not intended for use as a grab bar or support bar
Product Usage Instructions
How To Install Towel Bar
- Slide the extension of the towel bar kit onto the bracket.
- Orient the screw hole of the extension downwards.
- Tighten the screw with the hex wrench to secure the towel bar kit.
How To Install Single Robe Hook
- Slide the single robe hook onto the bracket.
- Orient the screw hole of the hook downwards.
- Tighten the screw with the hex wrench to secure the single robe hook.
How To Install Towel Ring
- Slide the towel ring onto the bracket.
- Orient the screw hole of the towel ring downwards.
- Tighten the screw with the hex wrench to secure the towel ring.
How To Install Tissue Holder
- Slide the toilet tissue holder onto the bracket.
- Orient the screw hole of the holder downwards.
- Tighten the screw with the hex wrench to secure the toilet tissue holder.
Technical Specification
NOTE:
These products should be located and mounted to a wall. While it is possible
to mount them to any surface, a stud or concrete mounted product will yield
the best results.
DANGER :(Risk of personal injury)
These products are not designed or intended for use as a grab bar or support
bar. Do not install any of these products in any area where they are likely to
be used inadvertenrly as a grab bar or support bar.
Cleaning Instructions
To preserve the fine finish of this product, clean only with a soft damp cloth. Dry well. Do not use commercial or abrasive cleaners.
How To Install Towel Bar
- Slide the extension of the towel bar kit onto the bracket .
- Orient the screw hole of the extension downwards.
- Tighten the screw with the hex wrench to secure the towel bar kit .
How To Install Singe Robe Hook
- Slide the singe robe hook onto thebracket .
- Orient the screw hole of thehook downwards.
- Tighten the screw with the hex wrench to secure the singerobe hook
How To Install Towel Ring
- Slide the towel ring onto the bracket .
- Orient the screw hole of the towel ring downwards.
- Tighten the screw with the hex wrench to secure the towel ring .
How To Install Tissue Holder
- Slide the toilet tissue holder onto the bracket .
- Orient the screw hole of the holder downwards .
- Tighten the screw with the hex wrench to secure the toilet tissue holder.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>