AIDimming PE298B 36-55W Dimmable Led Driver Owner’s Manual

AIDimming PE298B 36-55W Dimmable Led Driver

Product Information

The product is a 3-in-1 multi-functional device that can be used for welding, soldering, and cutting. It features various settings and accessories to ensure versatile usage.

Key Features:

• Welding capability for 53&026 and 7GLPPHUDQG
• Soldering capability for 3)&
• Cutting functionality with adjustable settings
• Compact design for easy handling
• Multiple safety features for user protection

Included Accessories:

• Welding nozzle
• Soldering iron
• Cutting blade
• Protective goggles
• User manual and instructions

Product Usage Instructions

Welding:

1. Attach the welding nozzle securely to the device.
2. Set the device to the desired temperature and power level.
3. Hold the device with a firm grip and position the welding nozzle near the joint to be welded.
4. Activate the welding function and move the nozzle along the joint to create a strong bond.
5. After use, allow the device to cool down before storing it.

Soldering:

1. Attach the soldering iron to the device and ensure it is securely connected.
2. Select the appropriate temperature setting for soldering.
3. Apply soldering flux to the area to be soldered.
4. Hold the soldering iron at a slight angle and touch the soldering tip to the joint, allowing the solder to flow evenly.
5. After soldering, clean the tip of the soldering iron and allow it to cool before storing.

Cutting:

1. Insert the cutting blade into the device and ensure it is properly secured.
2. Adjust the cutting depth and speed according to the material being cut.
3. Hold the device with a steady grip and position the cutting blade at the starting point of the cut.
4. Activate the cutting function and smoothly move the device along the desired cutting path.
5. After cutting, turn off the device and allow it to cool before removing or replacing the blade.

For more detailed instructions and safety guidelines, please refer to the user manual provided with the product.

PE298B 36-55W

Features

• LED phase-cut dimming driver, dimming range 2-100%
• Suitable for PC MOSFET dimmer and FPC TRAIC dimmer
• Active PFC
• Protections:short circuit/over voltage/over current
• Natural cold wind
• Big terminal locked by screw
• Suitable for LED home lighting and commercial lighting
• Safe no load protection device
• Economic and convenient installation
• conform to the world lighting equipment safety standards
• Protection class II
• Three years warranty

General description:

PE298B is one of the constant current dimming LED driver developed by my company with high power factor high efficiency, high precision, the use of the efficient stable low loss switch control chip and the high performance components makes it with low noise, energy saving, environmental protection, long life and other characteristics.

Specification

Dimensions

Product Label

Wiring Diagram

Wiring:

• The input terminal: wire gauge 22AWG-14AWG (0.315mm2 – 2.06mm2)wire stripping requirement:9-10mm.
• The output terminal: wire gauge 22AWG-12AWG (0.315mm2 – 3.15mm2)wire stripping requirement:6-7mm.

Compatibility:

Note : due to the different power of dimmer and dimming system, the compatibility will be different. Before purchase, it needs to confirm with the business to ensure the best matching effect of the product.

The use of guidance:

• please pay attention to the distinction between input and output, connect correctly, then power on

• please connect first the load of the DC output, open the power supply after checking; in the constant current mode, if power on at
  open circuit, please turn off the power supply and can’t connect the LED until the electric energy stored by the output release, or it may damage the LED;

• this type of power supply is only limited to the use of the LED lamps and lanterns, the input voltage range is AC200-250V, the heat insulation cotton and other items that obstruct the heat dissipation of the product, which conforms to the product under the Specified output voltage, current range, the use environment temperature is -20-45 degrees,and the surface can not cover the conditions of the environment, this product enjoys three yearsof free warranty.

The abnormal conditions and the corresponding treatment methods:

1. the LED lamp doesn’t bright after the dimming driver is connected at the first time please turn off the AC input and check as follow:
2. Whether or not DC output bad contact;
3. Whether DC output polarity is reversed, or the LED board is welded anti;
4. Whether AC input is bad contact; test after eliminating these failures.
5. the device has good connection, LED lights, but the LED flicker, please turn off the AC input, then check the DC output:
6. overload, under load.
7. Whether or not the parameters and actual parameters match.
8. please timely communicate with us if you any questions in the using, we will try our best to solve the problems with you.

Statement:

The pictures and specifications is for reference only, in kind prevail, specifications are subject to change with further notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>