KILOVIEW P1 4G Bonding SDI Video Encoder Owner’s Manual

KILOVIEW P1 4G Bonding SDI Video Encoder

Product Information

Product Name: P1 4G Bonding Video Encoder

Features:

• High integration, portable, low consumption, high performance
• Built-in dual 4G-LTE modems
• IEEE 802.11 b/g/n/ac dual-band (2.4G/5.8G) WI-FI model
• Professional SDI H.264/AVC encoder
• Built-in lithium battery with a battery life of 3 hours
• Supports up to 1080p60 Full HD video encoding
• Enables up to 960×540@60Hz sub-stream encoding
• Very low power consumption

Product Usage Instructions

1. Connect the P1 4G Bonding Video Encoder to a power source using the provided USB cable.
2. Ensure that the lithium battery is fully charged before usage.
3. Press and hold the power button located on the device to turn it on.
4. Wait for the device to boot up and establish a stable connection with the built-in dual 4G-LTE modems and WI-FI.
5. Connect an SDI source to the P1 using an SDI cable.
6. Configure the video encoding settings according to your requirements. The P1 supports up to 1080p60 Full HD video encoding and enables sub-stream encoding at 960×540@60Hz.
7. To start encoding, press the appropriate button or follow the on-screen instructions.
8. The encoded video can be transmitted over the 4G network or streamed over the WI-FI connection.
9. Monitor the encoding process and adjust the settings if necessary.
10. After usage, press and hold the power button to turn off the P1 4G Bonding Video Encoder.

Product Overview

P1 is a professional HD/3G-SDI H.264 video encoder, designed for outdoor broadcaster, applied in video image transmission. Small size and ultra-low consumption design! It supports up to 1080p60 input. Input SDI signal through preceding image processor for image enhancement, then encoding by SOC processor for creating H.264 video encode featured with high performance and low bit rate. P1 supports unbind audio from SDI signal, also input audio from Analog Line-in for AAC (MPEG4- Audio) stereo audio encoding or G.711 audio encoding. Built-in Kiloview Sunshine streaming media server engine is a server with the ability of supporting 20-50 concurrent users access simultaneously. P1 built in battery can support working 3 hours. And users can prolong working time with the help of mobile power bank. Easy operation and convenience! P1 is equipped with bracket and hot shoe screw, fixed well on the camera. Button design between bracket and camera makes device disassemble very easily.

Features

• High integration, portable, low consumption, high performance
  P1, small size of 115mm75mm35mm, integrates FPGA, video co-processor and video encoding chip. It is built-in two 4G-LTE modems, IEEE 802.11 b/g/n/ac dual-band (2.4G/5.8G) WI-FI model and built-in lithium battery. P1 can support up to 1080p60 Full HD video encoding, meanwhile enabling up to 960×540@60Hz sub-stream encoding. Very low power consumption. Under typical case by opening dual 4G modules, overall power consumption is <=6.5W. Matched up with 6800mAh lithium battery can work for 3 hours.

• Low bit rate assuring nice image and quality audio
  P1 adopts VLB (Very Low Bit Rate) H.264 video encoding technology, bonding with preceding video processor to do video dynamic noise reduction, image enhancement, etc.. Generally, 1Mbps@720p, 1.5Mbps@1080p can achieve good video encoding quality, which meet needs of low bit rate and quality image under internet applications.

• Support Wi-Fi and 4G-LTE
  P1 has built-in two 4G-LTE modules, working with SIM card. It supports bonding work of multiple 4G-LTE modules to enhance bandwidth and improve transmission reliability. P1 also supports built-in IEEE 802.11 b/g/n/ac dual-band (2.4G/5.8G) WI-FI model.

• Powerful streaming media protocols supported and full-service function
  P1 needs to work with Kiloview CellCentre 4G bonding streaming media platform (software). CellCentre platform is a cloud server platform provided by Kiloview, connected via Phone APP to enable or stop 4G bonding service. CellCentre fully supports RTMP/HLS/TS and RTP/RTSP/ protocols. CellCentre push bonded video streaming live to many global live video platforms, or providing video transit and distribution, 20-50 concurrent users to access simultaneously.
  { Note: Only with P1 hardware couldn’t realize bonding transmission, but could finish normal encoding/transmission and pushing functions}

• Easy operation and professional quality
  P1 allows you to use Web interface to manage device, as well as Phone/PAD App.

Other features

• Supported global live video platform (tested): YouTube, UStream, Twitch and so on.;
• Supported streaming media server platform/CDN system (tested): Wowza, FMS, RED5, SRS, etc.; Local storage and recording based on Micro SD/TF card;
• Support image rotation, cutting, gray scale and other special image processing;
• Support character /image overlay;
• Support quick function customization (Please contact salesman or factory technical support); Two-way voice intercom function (based on factory provided solutions or for customization).

Main parameters

Interface

(2.4G/5.8G),external  antenna
Signal and formats| Interface standard| SD/HD/3G SDI
---|---|---
Supported video formats| 1080p23.98/24/25/29.97/30

1080p50/59.94/60

1080i50/59.94/60

720p23.98/24/25/29.97/30

720p50/59.94/60

Audio| stereo SDI AES/EBU audio
Encoding| Video encoding| H.264/AVCHigh profile (up to level 5.1), compatible with Main profile and Baseline
---|---|---
Multi-stream supported| Support multi-stream encoding, including Main /Sub stream and Motion JPEG image encoding
Main stream: up to 1080p60,the highest bitrate is 30Mbps Sub stream: up to 960540,the highest bitrate is 4Mbps Motion JPEG: up to 19201080 encoding
Audio encoding| AAC/MPEG4-Audio,  G.711  (u-Law/a-Law) {Other algorithm can be extended}
Encoding latency| ≤67ms
Video encoding bitrates| 256Kbps~30Mbps  adjustable
Audio encoding bitrates| 32Kbps ~ 512Kbps : AAC encoding 64Kbps : G.711 encoding
Transmission protocols and Management protocols| Transmission  protocols| RTP / RTSP (compatible RTP over RTSP, RTSP HTTP Tunnel and RTSP Multicast)

RTMP pushing, RTMP service, TS over UDP, HLS

---|---|---
Management protocol| HTTP

Management ways

Size and accessories

Battery

Contact us

Email: info@kiloview.com
Web: en.kiloview.com

References

• Kiloview2023 - Kiloview

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>