52276-BLK Task Chair
Instruction Manual ITM. / ART. 438455

52276-BLK

TASK CHAIR
FAUTEUIL FONCTIONNEL SILLA DE TRABAJO ARBETSSTOL
Use and Care Instructions

52276-BLK Task Chair

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Attention:

1. Do not stand on the seat cushion.
2. For indoor use only. Please do not expose to direct sunlight, sources of excessive heat, or use in wet or damp environments.
3. Do not allow children to play on or near this product.
4. Please avoid use of sharp objects on or near this product.
5. Clean spills / marks immediately, as stains are harder to remove when they are left unattended.
6. Only a damp cloth should be used to clean the upholstery surface. For persistent stains and overall cleaning, contact a professional upholstery cleaning company.
7. Do not use power tools. Only use the Allen Key provided. Check and re-tighten bolts every 90 days.
8. The casters sold with this chair are intended for use on carpet and not recommended for use on tile or hard wood floors. Using these casters on tile or wood flooring may cause floor surface damage, so please consider purchasing a chairmat to protect your floor surfaces.

STOP
For assistance with assembly or installation, parts and customer service, call:
1-800-379-9773 (from US), Monday – Friday 6:00 AM – 5:00 PM Pacific Time
1-866-789-1060 (from Canada), Monday – Friday 6:00 AM – 5:00 PM Pacific Time
0-800-051-6775 (from UK), Monday – Friday 2:00 PM – 1:00 AM UK Standard Time
www.trueinnovations.com

Costco Wholesale UK Ltd /
Costco Online UK Ltd
Hartspring Lane
Watford, Herts
WD25 8JS
United Kingdom
01923 213113
www.costco.co.uk
Costco Wholesale Iceland ehf.
Kauptún 3-7, 210 Gardabaer
Iceland
www.costco.is
Costco Wholesale Sweden AB
Box 614
114 11 Stockholm
Sweden
www.costco.se
MADE IN CHINA

PARTS

Note: Do not use power tools. Only use the Allen Key provided.

Take off base cover (C) from the base (B), then turn the base over. Insert metal legs (D) into the base (B) and secure by 15 mm small bolts (J). Tighten all the bolts.
Warning: Fully hand-tighten all 5 bolts at each leg/hub connection. Be careful not to overtighten or strip bolts. Do not use power tools. If you experience a problem with the leg attachment or are unable to fully tighten any of the bolts, stop. Do not use the base. Contact Customer Service for assistance. All bolts should be checked and re-tightened every 90 days. Press the casters (A) into holes at the end of each leg. Turn the base over and then attach the base cover (C) to the base (B) as shown. Insert the gas lift (E) through the center hole on top of the base (B).Attach seat plate (F) to the bottom of the seat cushion (with the front of the seat plate facing the front of seat cushion).
Attach by using 25 mm big bolts (K) for the holes of the seat plate (F) and tighten bolts. Note: Tighten the bolts completely. Align the back cushion (I) with the seat cushion (H) and attach the back support plate onto the bottom of the seat cushion (H) by using 25 mm small bolts (L).
Note: Do not tighten the bolts completely. Insert 38 mm big bolts with spring washers (M) into arm holes, attaching arms (G) (with the front of arms facing the front of seat cushion) to sides of seat cushion (H) and back cushion (I).
Note: Tighten all the bolts completely. Remember to tighten the back support plate bolts. Position the assembled chair upright with the seat plate facing down. Insert the gas lift (E) into the center hole of the seat plate (F). Push down firmly over the gas lift (E) until it is securely connected.Press the plastic caps (N) into armrest holes once all bolts have been tightened.

Operating instructions

Function Instruction – 1
To Adjust Seat Height:
While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. Once desired height is reached, release handle to lock chair at desired height. To lower the seat, lift the handle while seated. The chair will descend until the handle is released or the chair reaches the bottom position.

Function Instruction – 2
To Operate Tilt Lockout:
While seated, reach under the right side of the chair to find the height- adjustment handle. Pull the handle all the way out (away from the gas lift) to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and push the handle in towards the gas lift. Function Instruction – 3
To Adjust Tension on the Tilt:
Reach under the front center of chair seat and grasp the round black knob. To loosen the tilt mechanism, turn the knob clockwise. This lessens the effort required to rock back and forth. Rotate the knob until desired resistance is reached.  Function Instruction – 4
360˚ seat swivel.

Limited Warranty

True Innovations® seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser.”
The term “Original Purchaser” is defined as that party or entity which purchases True Innovations® furniture from an authorized True Innovations® retailer as shown by the original sales receipt. This warranty does not apply to “as-is” or previously owned seating products.
True Innovations® warrants its products to be free from defects in materials and workmanship (normal wear and tear, fading and stretching excepted), for one year from the date of purchase, except as provided below under the limited warranty.
The exceptions or exclusions to this warranty are as follows:
1. Any warranty claim that is submitted after the limited warranty period, or without proper proof of purchase will not include the cost of parts, labor, or delivery.
2. This warranty shall not apply to the True Innovations® products which have been subjected to misuse, neglect, alteration, modification, or attachments, either caused by the original purchaser, shipping, storage, accident, fire, flood, or acts of God.

In the event of a defect in material or workmanship covered by this warranty, True Innovations® will repair or replace, at their discretion, without charge, the warranted furniture within a reasonable amount of time. We reserve the right to require damaged parts to be returned to us upon request. Natural markings such as scars, brands, grain variations, wrinkles, color variations, etc. will be considered normal characteristics and not construed as defects. We cannot warrant leather against scratching or scuffing, as all leather is subject to blemishes with use.
For claims or questions concerning this warranty, please contact True Innovations® Customer Service department on the web at www.trueinnovations.com.Be prepared to provide your name, address, daytime phone number, the model and purchase order number of the product, date of purchase, and the store where it was purchased. True Innovations® requires that the original sales receipt be submitted with all requests to confirm that you are the original purchaser according to our written warranty.
All warranties are limited to the original purchaser for normal use by a person weighing less than 125 kg / 275 lb.
AUSTRALIA: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

References

• Home - True Innovations

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>