ERGODIRECT CHG-CAP Snap On Charging Cap Instruction Manual
- June 4, 2024
- ERGODIRECT
Table of Contents
ERGODIRECT CHG-CAP Snap On Charging Cap
IMPORTANT SAFETY INSTRUCTIONS
WARNING
- Keep away from extreme heat, direct sunlight, humidity and moisture
- Avoid extreme high or low ambient temperatures and sudden temperature changes
- Keep away from children
- Disconnect from power before cleaning
- Never operate this furnishing if it has a damaged cord or plug
- DO NOT use if wet or damaged
- DO NOT open, modify or repair
- DO NOT use outdoors
REGULATORY COMPLIANCES
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This device complies with CAN ICES-5(B)NMB-5(B)
This device conforms to UL STD. 62368-1 and certified to CSA STD C22.2 NO.
62368-1
SPECIFICATIONS
Power Supply
- Input: 100-240VAC, 50/60Hz, 2.0A (Max.)
- Output: 24VDC, 3A, 72W
- USB Hub
Output
- Type C: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A, PD compatible 65W max
- Type A1: 5V/3A, 9V/2A, 12V/1.5A, QC 3.0 compatible 18W max
- Type A2: 5V/3A, 9V/2A, 12V/1.5A, QC 3.0 compatible 18W max
- Type C + Type A1: 45W+18W, Max. 63W
- Type C + Type A2: 45W+18W, Max. 63W
Limitation
- USB Hub supports charging only, no data transfer
- When PD device connected to USB-C port, only one USB-A port works at QC 3.0 When USB-C is not under the load, both USB-A ports work at QC 3.0
- Operating temperature: 0 °C – 40 °C, 5% -90% RH
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>