4DRC 4D-V31 Remote Control Aircraft 4K Camera Instruction Manual

4DRC 4D-V31 Remote Control Aircraft 4K Camera Instruction Manual

• In order to meet the requirements of the aeronautical radio station’s electromagnetic ‘environment (various of aero models and UAV are not allowed to ly within the range of 10 km on each side of center line and 20km on both ends of the airport runway and in the) and civil aviation routes and airlines. Using various models and drones in the. no-fly zone issued by the relevant state departments is prohibited.

Warning

1. The packaging and instructions contain important information and shouid be kept.
2. With this aircraft, you are responsible for ensuring that no ham will be caused to the personal and property of others.
3. Commissioning and installing of aircraft must be strictly in accordance with the operating instructions, and attention shall be paid to the distance between the aircraft and the user or other people shall be 2 to 3m to prevent the aircraft from bumping into the head, face and body of people, and causing injury in flying and landing, etc.
4. Our company and distributors are not responsible for any loss and damage, as well as injury to people caused by improper use or operation.
5. Children should be guided by adults when operating the aircraft, This product is prohibited to be operated by children under 14 years old.
6. Please follow the instructions or packaging instructions Lo install and use correctly, and some parts should be assembled by adults
7. The product contains small parts, please place it out of the reach of chidren to prevent the risk of accidental eating or suffocation.
8. It s striclly forbidden to play on the road or in the place where water is  accumulated to avoid accidents.
9. Please put away the packing materials in time to avoid harm to children.
10. Do ot disassemble or modify the aircraft. Disassembly or modification may cause malfunction to the aircraft
11. The charging cable needs to be inserted into the designated power supply 5V=2A that s the same. as the product label.
12. The use of other charging cables will cause damage 1o the battery and may cause unexpected dangers.
13. The charging cable is ot a toy.
14. When charging the rechargeable battery, it must be under the supervision of an adult. When charging, it must be far away from flammable materials. During charging, the guardian should not leave the monitoring range.
15. Please do not short circuit or squeeze the battery to avoid explosion.
16. Do not mix different types of lithium batteries.
17. The aircraft uses a rechargeable lithium battery, which needs to be pulled out for charging.
18. Do not short-circuit, decompose or throw the battery into fire; do not put the battery in a place with high temperature and heat (such as i fire or near electric heating device),
19. The aircraft should be used as far away from other electrical equipment and magnefic objects as. possible, they may cause mutual interference.
20. Please keep a safe distance from the high-speed rotating propeller to avoid the risk of scalp or cut
21. The motor s a hot part; please do not touch it to avoid burns,
22. LED has laser radiation; please do not give direct light beam to others.
23. Do ot use the model near your ears! Misuse may cause hearing damage.
24. The USB charging cable must use the data cable provided by our company to charge the battery, otherwise it will cause serious damage to the batery and willlead to unexpected danger.
25. To meet the magnelic environment requirements of aeronautical radio stations. During the radio control order issued by the relevant state departments, the model remote control should be stopped within the city area as required.
26. Turn off the switch and unplug the battery when the battery of the aircrait is used up, and charge after 30 minutes of rest, otherwise the battery wil be easily damaged

List of accessories included

• Aircraft <1

• USB haring cache <1

• Fan blade x4

• Lithium battery x1

• Screwdriver 1

• Re mole collision 1

• Operating Instructions <1

Name of each part of aircraft

Wind blade installation diagram

Pinch the small cap in the midden of the fan blade and take out, When replacing, press down on the motor sha, being careful not to deform.

Note: Th fan bide i preened with leers of A1, A2, 81, and B2, in which, A1 =A2,B1 – B2, plaase insal it correcl according o the diagram, otherwise i cannot take off.

Lithium battery charging instructions

Side upwards according o he diagram 1o open he battery

disconnect i aicraft rom the batiery power port and then femove th battery

Charging: Insert he US port of the USB charging cable nto the computer USB port (or use 5 = 2A power adapter), and connect the other end of the US charging cable 1o the battery sockel. When charging, the red indicator on the module battery s on, and when the battery is fully charged, the red Indicator light goes out, which means that the charging is complete.

It must be charged with the aircraft charging cable provided by the factory, and other charging cables cannot be used. Be sure o remember 1o avoid accidents,

Name of  each part of  the remote control

I mode 1. e don,back, e, and igt o h joystick core sand o te ront, back, e, and rig fight o ht aicrat in mode 2 push ahead of he joystick 0 3cand, push back 0 descend, ove f 5 1 um lf, and move Ft s 1 nigh. I any e, ess vertical 00 o St rig, and pross Calvary wick scroll of, and 50,0 I any mode, push e joystick Harvard once t palate, wio 0 siar and 1o imps o 13k of.

Remote control battery installation

Instructions in charging

• Do not put the charged battery in a place with high temperature and heat, such as an open flame or an electric heating device, otherwise damage or explosion may occur.
• Do not hi tor beat the surface of hard objects with the battery.
• Do not disassemble the battery.
• Do not immerse the batery in water, and please store the battery in a dry place. Do ot leave battery alone when charging

Battery installation:

Remove the battery cover

instructions on the battery compartment remove the battery cover on the back and nsert a 2X “AAA”Battry (not included).

According to the pojarty 0 instructions on the battery compartment remove the battery cover on the back and nsert a 2X “AAA” Battry (not included).

Environmental requirements before flight

Please choose an outdoor and open environment with no rain and snow and low wind. Please stay ‘away from crowds, seer, wires, tal buildings, airports, and signal transmission towers when flying. Do not fly in a too small indoor environment with lots of things.

AP can ony bo vowed (photographically) when using tn rem Carole,and the remote controller canon be used when using APP.

Preparation instructions before flight ( using remote control)

Turn on the power supply of the aircraft and place it on a horizontal plane. At ts time, the aircraft placed on the horizontal plane wil automatically enter the frequency matching state, and the fuselage indicator it wile flash.

Note: Set the aircraft in a correct direction, and the nose shall face forward. It must be piaced on the horizontal plane.

Push the power switch of the remote control right, the remote control will emit “di di sounds, and the aircraft indicator light changes from flash to constant on, indicating successful frequency alignment

The aircraftremote controller must ensure suficient power or it cannot take off

Horizontal calibration operation:
Method 1: Long press the OK key to calibrate. (Figure 1), Method 2: In any mode, push the joystick forward to calibrate (Figure 2). The LED lights on the aircraft will double flash. The calioration of the  LED light on the aircraft is completed, and the remote control emits a “di” sound (as shown in Figure 1),

Start stop

Push the left control lever on the remote control upward (Figure 3). At this time, the aircraft can take off normally. After taking off all the indicator lights of the aircraft will always be on. During the flight,whether you short press the OK key, the aircraft will stop flying (Figure 4).

Not: This uncin operation s only uiab o e autocratic an uncongenial at. Undo normal Concomitants, 18 Commended 1 s the e ey attentions-key Bung.

One-key take-off and landing

When the frequency matching is completed, lightly press the remote control *one-key takeoff/landing” button (Figure 5), the aircraft will automatically rise to a height of about 2 meter, and keep flying at this. height; when this function key is pressed again, the aircraft will automatically land on the ground slowly.

above sequence: Turn on (rfer 10 8.1)- frequency matching of the remote conlrol starts (refer to 8.2)-s horizontal alignment (refer 10 8.3)- starstop (refer 10 8.4)- one-buton taking off and landing (rfer 10.8.5)

Introduction of remote control function and operation

1n mode 1, ater one-button takeoft, the | crone hovers to about 2m, press and hoid | the graviy unlock key, he remote controler | fown font and high nrear il make the ! aicrat descend; the remote controller igh | in front and low i roar il make the aircraft | ascend.

In mode 2, push the joystick of the remote | controllr forward to ascend the aircraf pull | the joystick backward to descend the aicraft.

Download and install the software

After scanning the code with your mobile phone, select the corresponding system to download in the browser

Link description

1. Tum on the power of aircraf, enter the (Settings) option (of mobile phone or IPAD), and open the. wireless network; find the device name of “4DRC**™ in the wireless network search list and connect; after connection, ex the setting option.
2. Open the software icon “of 4DRC FPV” in mobile phone to enter the control interface. (Try to stay away from other signal source environment when there is a shifting)

  Special prompt: Piease aim directly at the lens and perform gesture recognition at a position about 2:3M away from the lens and in an environment with good light and background.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>