FS S5860 Series 48-Port Fully Managed Pro Switch User Manual
- June 12, 2024
- FS
Table of Contents
FS S5860 Series 48-Port Fully Managed Pro Switch User Manual
Preface
Zabbix is an open-source monitoring software for networks and applications. It can monitor many network parameters andthehealth and integrity of servers, virtual machines, and any other kind of network device. This document will guide you to import thief’s template in Zambia and apply the template to monitor the FS Switches. The version of Rabbi in this document is 4.4.4 (CentOS Linux version is 7.7, MySQL version is 5.6.46), and taking FS-S5860 switch as an example to monitor the S5860-24XB-Uswitch.
Operation Guide
Operation Steps
- Configure SNMP function of the switch
- Log in to Zabbix to import the FS-S5860 template
- Create host group S5860-Switch and link FS-S5860 template
- Create host, link S5860-Switch host group, link FS-S5860 template
- Monitor host data
Operation Process
Configure the Switch
Take S5860-24XB-U as an example to configure the SNMP function
- FS# configure terminal
- FS (config)# snmp-server enable version v2c
- FS (config)# snmp-server community Public ro
Log in to Zabbix to Import Templates
Step 1: Open Zabbix login interface and enter the user name and password to
log in to the Zabbix software
Step 2: Select the Templates under Configuration category, and click
Import in the upper right corner to enter the template port interface.
Step 3: Select the ‘FS-S5860_zbx_templates’, click the Import button to
import it, and then you can see the FS S5860 templates that have been
successfully imported in the template list after the import success is
displayed.
Create Host Groups
Step 1: Select the host groups and click the Create host group button in
the upper-right corner
Step 2: Create a host group named ‘S5860-Series’ host group, then view
the successfully created host group
Create Hosts
Step 1: Enter Hosts page under Configuration, click on the Create Host
button in the upper right corner to create the host.
Step 2: Create a host named S5860-24XB-U, select the S5860-Series host
group, enter the management IP address of the switchinthe SNMP interfaces,
remove the check box before Use bulk requests, and click Add.
Step 3: You can view the created hosts under the host list.
Link Template and Host Group
Step 1: Link the S5860-Series host group in the FS-S5860 template
Step 2: Link FS-S5860 template under S5860-24XB-U host.
Step 3: Return to the host interface, you can view the information that
has been linked to the template in the host
Monitoring Switch Data
Select S5860-Series Host groups and S5860-24XB-U Hosts, you can view that
Zambia has monitored the relevant information and data of the switch
S5860-24XB-U.
Zabbix Personalized Customization
Zabbix’s Dashboard can display visualized information and data (overview, map, chart, clock, etc.). Here we take the creationof CPU utilization as an example.
Step 1: Click Create dashboard in the upper right corner to create a
dashboard.
Step 2: Create a dashboard named FS-S5860 dashboard.
Step 3: Click anywhere on the dashboard to create a component, for
example namded as cpu Utilization, select S5860-24XB-Uhostpattern, CPU item
pattern of Data set, and click Create
Step 4 : View the created components and save the dashboard.
Of course, you can also configure the visualized information in the dashboard
according to personal preferences
FAQ
Template Import Failed
Due to the iteration of Zabbix version, the name of the public template
provided by Zabbix may change. The template providedbyFS refers to the public
template “Template Module Interfaces SNMPv2”. During the template import
process, if the import fails, it prompts that the template is not found like
below:
Pls refer to below solution：
Step 1: Search for the keyword “Interfaces SNMP” in Zabbix, find the
template, and record the template name
Step 2: Edit the template in text mode and replace “Template Module
Interfaces SNMPv2” with the searched template name.
Step 3: Save the modified template and re-import the template.
Monitor Host Failed
Due to the configuration of the SNMP community name of the switch(case-
sensitive), the switch may not be monitored and managed by Zabbix, as shown in
the following figure
Pls refer to below solution：
Step 1: View and record the Zabbix host SNMP community name configuration
Step 2: Check whether the SNMP community name configuration of the switch is consistent with the Zabbix host SNMP community name configuration.
Step 3 : Modify the SNMP community name configuration of the switch to keep it consistent with the Zabbix host SNMP community name configuration.
Step 4: Wait for Zabbix to reconnect to the host, and finally connect to
the host successfully.
The information in this document is subject to change without notice. FS has made all efforts to ensure the accuracy of the information, but all information in this document does not constitute any kind of warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>