SoundShaker TA-4800 Bass shakers Amplifier and Transducer INSTALLATION GUIDE

SoundShaker TA-4800 Bass shakers Amplifier and Transducer

WHAT’S IN THE BOX

SINGLE BASS OUT RECEIVER SETUP

This is the transmitter setup for a single bass out. Please follow each step to ensure that your transmitter and amplifier are connected correctly.

• STEP 1. CONNECT THE 3032 Y-CABLE AND POWER SUPPLY
  Connect the power supply for the transmitter. Connect the split cable end of the 3032 Y-Cable to the Audio In on the transmitter.

• STEP 2. CONNECT THE 3031 Y-CABLE
  Connect the single end of the 3032 Y-Cable to one split end of the 3031 Y-Cable.

• STEP 3. CONNECT THE 3032 Y-CABLE TO YOUR RECEIVER & SUBWOOFER
  Connect the remaining ends of the 3031 Y-Cable to both your receiver and your subwoofer. Once all connections are secure power up the transmitter.

DUAL BASS OUT RECEIVER SETUP

This is the transmitter setup for a double bass out. Please follow each step to ensure that your transmitter and amplifier are connected correctly.

• STEP 1. CONNECT THE 3032 Y-CABLE AND POWER SUPPLY
  Connect the power supply for the transmitter. Connect the split cable end of the 3032 Y-Cable to the Audio In on the transmitter.

• STEP 2. CONNECT THE 3032 Y-CABLE
  Connect the single end of the 3032 Y-Cable to your receiver.

• STEP 3. CONNECT YOUR RECEIVER & SUBWOOFER
  Connect your receiver to your subwoofer. Once all connections are secure power up the transmitter.

SOUNDSHAKER AMPLIFIER SETUP

This is the main amplifier setup. Please follow each step to ensure that your amplifier is installed correctly. Make sure the transmitter is installed and is sending a signal out during the amplifier setup.

• STEP 5. CONNECT THE LONG CABLE AND POWER SUPPLY
  Connect the 3120 Long Cable to the SoundShaker port on the back of the 5012 Amplifier.

• STEP 6a-6b. CONNECT THE LONG CABLE TO THE SHORT CABLES
  The 3120 Long Cable attaches to the 81-3108 Short Cables.

• STEP 7a-7b. CONNECT SHORT CABLES TO SOUNDSHAKER(S)
  Finish by connecting each SoundShaker to an 81-3108 short cable.

SoundShakers are sold separately.

NOTE: You can connect up to a total of 4 SoundShakers to each amplifier.

TROUBLESHOOTING (FAQS)

• DOES THE ORDER IN WHICH I CONNECT MY SOUNDSHAKERS MATTER?
  No, the order in which your SoundShakers are connected to the long cable will not matter. The signal runs to all outputs when powered.

• MY SOUNDSHAKER SYSTEM DOES NOT APPEAR TO BE WORKING.
  Check and make sure all connections and power supplies are secured. Make sure your transmitter, amplifier, receiver, and subwoofer are all powered up.

• IS SOUNDSHAKER COMPATIBLE WITH OTHER WIRELESS AUDIO SYSTEMS?
  SoundShaker is compatible with any audio system that provides an RCA output to connect SoundShaker to.

• I’VE SYNC’D MY AMP BUT DON’T FEEL ANY VIBRATIONS.
  When syncing your amp be sure to check that an audio signal is being sent out. Your amplifier will not sync without a signal currently running. Refer to the illustration on the next page to learn how to sync up your amplifier.

SOUNDSHAKER WIRELESS SYNCING

Please follow each step to ensure that your equipment syncs correctly.

PLEASE NOTE: YOUR SOUNDSHAKER SHOULD ALREADY BE SYNC’D WITH YOUR SOUNDSHAKER AMPLIFIER.

• STEP 1. HOLD THE AMPLIFIER CODE BUTTON TO BEGIN SYNC Make sure Wireless Switch is set to. MAKE SURE YOU HAVE A MOVIE OR MUSIC PLAYING, press and hold the Code Button for a minimum of 3 seconds to begin syncing process. When light blinks rapidly proceed to step 2.
• STEP 2. HOLD THE TRANSMITTER CODE BUTTON TO COMPLETE SYNC WITH THE AMP Press and hold Code Button for a minimum of 3 seconds until the light blinks rapidly. The red light will turn solid when the pairing is completed. (Both units should have solid red lights when paired.)

FREQUENTLY ASKED QUESTIONS

What is a bass shaker?

A bass shaker is a transducer that converts low-frequency audio signals (bass) into mechanical vibrations that can be felt, enhancing the tactile experience during movies, music, or gaming.

How does a bass shaker work?

Bass shakers use a combination of a voice coil and a mass attached to a diaphragm. When a low-frequency audio signal is sent to the shaker, the voice coil moves the mass, creating vibrations that are transferred to the mounting surface and felt by the user.

What is the purpose of using a bass shaker?

Bass shakers add an extra dimension to the audio experience by creating tactile sensations, making the audio content more immersive and engaging.

How do I connect a bass shaker to my audio system?

Bass shakers typically connect to the audio system's subwoofer output or an LFE (Low-Frequency Effects) output using standard speaker wires.

What is the SoundShaker TA-4800 Bass shaker Amplifier and Transducer used for?

The SoundShaker TA-4800 is likely a combination of a bass shaker transducer and a dedicated amplifier designed to power the shaker and enhance the tactile experience in home theater setups.

Does the SoundShaker TA-4800 come with multiple transducers for different seating positions?

Some bass shaker systems, including the SoundShaker TA-4800, may come with multiple transducers to be installed under different seating positions for a more immersive experience.

What is the power output of the TA-4800 amplifier?

The power output of the TA-4800 amplifier may vary, but it is typically designed to provide enough power to drive the attached bass shakers effectively.

Is the TA-4800 amplifier compatible with all types of bass shakers?

The TA-4800 amplifier is likely designed specifically for use with the SoundShaker TA-4800 Bass shakers transducers. Compatibility with other bass shakers may vary.

Can I adjust the intensity of the bass shaker effects?

Many bass shaker amplifiers, including the TA-4800, offer adjustable settings to control the intensity of the vibrations according to your preferences.

Is the TA-4800 amplifier compatible with different audio systems and receivers?

The compatibility of the TA-4800 amplifier with different audio systems and receivers may depend on the connectivity options and output requirements of your specific audio setup.

Can I use the TA-4800 amplifier with gaming consoles?

Yes, the TA-4800 amplifier can be used with gaming consoles to enhance the gaming experience with tactile vibrations.

Is it easy to install the TA-4800 bass shaker system?

Installing the TA-4800 bass shaker system typically involves some basic setup, such as connecting the amplifier, placing the transducers under seating, and adjusting settings.

What is the frequency response of the TA-4800 bass shaker system?

The frequency response of the TA-4800 bass shaker system depends on the specifications of the transducer and the amplifier.

Can I use the TA-4800 system in combination with a home theater subwoofer?

Yes, the TA-4800 system can be used alongside a home theater subwoofer to complement the bass effects and enhance the overall audio experience.

Does the TA-4800 come with a remote control for adjusting settings?

Some bass shaker systems may come with a remote control, but the presence of a remote control for the TA-4800 would depend on the specific product details.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:

SoundShaker TA-4800 Bass shakers Amplifier and Transducer INSTALLATION GUIDE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>