atomi LED Bluetooth Shower Speaker User Guide
- June 12, 2024
- atomi
Table of Contents
atomi LED Bluetooth Shower Speaker
Product Information
The UT: V5CVHD-ACT01.974A0 is a water-resistant wireless speaker with an LED light. It has an IPX4 water rating, making it splash-resistant from any direction. The package contents include a 5W shower speaker, a USB-C cable, a suction cup, and a user guide.
Controls
- Power On/Off
- Play/Pause/Stop
- Previous Song Volume Down
- Next Song Volume Up
- LED Light On/Off
- Charge Indicator (when the device is OFF)
Troubleshooting
To pair the Atomi shower speaker, ensure that the Bluetooth range is within 33 feet. Connectivity may be affected by walls and distance.
Maintenance
Only use a soft dry cloth to clean the enclosure of the unit. NEVER use liquids or abrasive cleaners to clean.
FCC Warning
This device complies with 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operations.
Important Safeguards
- Read all instructions before using.
- WARNING: Do not place speakers too close to your ears. It may cause damage to the eardrums, especially in young children.
- Use this product only for its intended use as described in this manual.
- Not for use by children. THIS IS NOT A TOY.
- Never operate this product if it has a damaged cord, plug, cable, or housing.
- Keep away from heated surfaces.
- Only set on dry surfaces. Do not place on a surface wet from water or cleaning solvents.
Thank you for purchasing the Atomi LED Bluetooth ® Shower Speaker!
Package Contents
- 5W Shower speaker
- USB-C cable
- Suction cup
- User guide
Controls
Charging the unit
Charge by using the USB to USB-C cord (included) through a computer or AC
adapter with a USB jack (not included).
Note: Please allow approximately 2 hours for a full charge. The battery
will last up to 6 hours when connected wirelessly
IPX4 Water Rating Splash resistant from any direction. Please, do not submerge in water.
Waterproof Rating – IPX4
This unit has a water resistance rating of IPX4. This rating is suitable for
indoor and outdoor use in the presence of incidental or light exposure to
splashing water, rain, or snow. Water splashing against the enclosure from any
angle should have no harmful effects. It is not recommended to submerge this
speaker in water for any amount of time or allow any water to get into the
speaker mesh side as this will decrease the volume. Rotate the speaker to
allow the accumulated water to exit the speaker.
IMPORTANT: To ensure your speaker is prepared for use in a wet
environment, disconnect and remove any power cables, and tightly close the
charging po water cap. If the water cap is not properly closed, water
resistance will be compromised and could result in damage to the speaker or
personal injury
TROUBLESHOOTING
IPX4 Water-Resistant Wireless Speaker with LED Light
Pairing the Atomi shower speaker.
To listen to your music over Bluetooth® wireless connection, you need to pair your device with the Atomi shower speaker.
- Make sure your device has Bluetooth® capability.
- Press and hold the power button for 5 seconds; You will hear a musical sound, letting you know that the speaker is now on.
- Follow the instructions on your device to pair the unit.
- Pair your device by selecting Shower Speaker from your Bluetooth® listings on your device or selecting YES.
- Press play on your device and use the controls on the unit to adjust the desired volume
Bluetooth range: 33. It can get connectivity interference caused by walls and distance.
NOTE:
- Once you have successfully paired your device, you may not need to repeat the above steps.
- When pairing with a computer, please consult your computer manufacturer for Bluetooth® pairing instructions and/or the latest Bluetooth® Drivers.
- Keep all non-water-resistant devices (phones, mp3 players, etc.) in a dry place where they will not come in contact with water.
- A pairing code is not required.
- The Atomi Shower Speaker will automatically power off aer 10 minutes of inactivity.
- For the best suction result, mount the shower speaker on any clean and dry sauce.
- Adding a little water to the suction helps retain rigidity.
Maintenance
- Only use a so dry cloth to clean the enclosure of the unit. NEVER use liquids or abrasive cleaners to clean.
FCC Warning
NOTE: This device complies with 15 of the FCC Rules.
Operation is subjected to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operations.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FOC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on.
Important Safeguards:
- When using an electrical product, basic precautions should always be followed, including the following:
- Read all instructions before using
- WARNING: Do not place speakers too close to your ears.
- May cause damage to the eardrums, especially in young children.
- Use this product only for its intended use as described in this manual.
- atomic is not liable for any damage caused to smartphones, iPod®/MP3 player, or any device.
- Not for use by children. THIS IS NOT A TOY
- Never operate this product if it has a damaged cord, plug, cable, or housing.
- Keep away from heated surfaces.
- Only set on dry surfaces. Do not place on surfaces wet from water or cleaning solvents.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this device.