atomi Shower Head with Bluetooth Speaker User Manual
- June 12, 2024
- atomi
Table of Contents
atomi Shower Head with Bluetooth Speaker
Product Information
The Atomi Shower Head with Bluetooth Speaker is a high-quality shower speaker that allows you to enjoy your favorite music, podcasts, and answer phone calls while in the shower. It is designed to provide a spa-like experience and can be easily set up.
Product Specifications:
- Battery: 500mAh
- Speaker: 3W
- Waterproof: IPX4
- Bluetooth name: Atomi Shower Head Speaker
Package Contents:
- Atomi Shower Head with Bluetooth Speaker
- Micro-USB cable
Product Usage Instructions
- Flush debris from the shower head before installation.
- Apply sealant tape to ensure a proper seal.
- Install the shower head. Note: Wrench not included.
- To power on the Atomi Shower Head with Bluetooth Speaker, press and hold the power button for 2 seconds.
- To power off the Atomi Shower Head with Bluetooth Speaker, press and hold the power button for 2 seconds.
- To pick up or end a call, simply press the power button.
- To pair the Atomi Shower Head with Bluetooth Speaker with your device, ensure that it is in pairing mode. The LED indicator on the speaker will turn steady blue when it is ready for pairing.
- To charge the speaker, detach it from the shower head and connect the included USB to Micro USB cable to a computer or AC adapter with a USB jack.
- The power indicator on the speaker will flash blue while charging and turn steady red when fully charged. It is recommended to allow approximately 3 hours for a full charge.
- The built-in microphone allows for hands-free calling. To answer or end a call, press the power button once when you hear the ringtone. To reject an incoming call, press and hold the power button for 2 seconds.
Safety Information:
- Read the instructions carefully for best use.
- Avoid using the Shower Head with Bluetooth Speaker near open flames or heat sources.
- Clean the Shower Head with Bluetooth Speaker only with a dry cloth.
Thank you for purchasing the Atomi Shower Head with Bluetooth Speaker
Get ready to turn your shower into a spa experience. Just add water- and your favourite podcast or playlist- while ge˜ing ready in the morning and unwinding at night. The bluetooth speaker also lets you answer phone calls! High quality and great sounding, this shower speaker can be set up in a cinch.
Inside the box you’ll find:
- Atomi Shower Head with Bluetooth Speaker
- Micro-USB cable
Specifications
- Battery: 500mAh
- Speaker: 3W
- Waterproof: IPX4
- Bluetooth name: Atomi Shower Head Speaker
Installation
- Flush debris.
- Apply sealant tape.
- Install the shower head.
Note : Wrench not included.
-
Powering on and Pairing the Shower Head with Bluetooth Speaker
- The Atomi Shower Head with Bluetooth Speaker has only one bu˜on, the power button.
- To turn the Atomi Shower Head with Bluetooth Speaker ON: Press the power bu˜on for 2 seconds.
- To turn the Atomi Shower Head with Bluetooth Speaker OFF: Press the power bu˜on for 2 seconds.
- To pick up or end a call: Show press the power button. Note : Volume is controlled only by the device connected to your Shower Head with Bluetooth Speaker.
-
To pair the Atomi Shower Head with Bluetooth Speaker with your device
- Make sure your device has Bluetooth® capability.
- Turn the Atomi Shower Head with Bluetooth Speaker on.
- Watch for the power button to fast-flash in blue, indicating that it’s in pairing mode.
- Follow the instructions on your device to pair the unit.
- Pair your device by selecting Atomi Shower Head with
- Bluetooth Speaker from the Bluetooth® listing on your device or by selecting YES. When successfully connected, you will hear one beep, and the power button on the Atomi Shower Head with Bluetooth Speaker will go steady blue.
- Press play on your device and use controls on it to adjust the desired volume.
Charging the Shower Head with Bluetooth Speaker
Pull the speaker from the Shower Head with Bluetooth Speaker to detach it. The charger is located on the back of the speaker. Charge by using the USB to Micro USB cord (included) with a computer or AC adapter with USB jack (not included).
Power Indicator
- Blue slow flashing (2s): Low battery
- Steady Red: Charging
- Indicator off: Fully charged
NOTE : Please allow approximately 3 hours for full charge. Ba˜ery will last up to 6 hours when connected wirelessly.
IMPORTANT : Do not overcharge the ba˜ery for long periods, as it could damage the ba˜ery.
Built-In Microphone
The Atomi Shower Head with Bluetooth Speaker is equipped with a built-in microphone, for easy hands-free talking:
- Make sure the Atomi Shower Head with Bluetooth Speaker is successfully paired with your device.
- To answer or end a call, simply press the power bu˜on one time when you hear a ringtone.
- To reject an incoming call, press and hold the power bu˜on for 2 seconds.
NOTE :
When an incoming call is detected, the Atomi Shower Head with Bluetooth Speaker will pause the music and a ringtone will sound. A˙er the call is terminated, the music will resume to play automatically where it le˙ o˝. When making a call, use your phone to dial and the atomi Shower Head with Bluetooth Speaker will automatically go into hands-free mode.
Note :
- Once you have successfully paired your device, you may not need to repeat the above steps.
- When pairing with a computer, please consult your computer manufacturer for Bluetooth® pairing instructions and/or the latest Bluetooth® Drivers.
- Keep all non-water-resistant devices (phones, mp3 players, etc.) in a dry place where they will not come into contact with water.
- A pairing code is not required.
- The atomic Shower Head with Bluetooth Speaker will automatically power 10 minutes of inactivity (no Bluetooth connection / no play)
Safety Information
- Read these instructions carefully for best use.
- DO NOT use the Shower Head with Bluetooth Speaker near open flames, such as candles, heat sources, radiators, and stoves.
- Only clean the Shower Head with Bluetooth Speaker with a dry cloth.
- WARNING: Risk of electric shock.
- For connection to a power supply not in the U.S.A., use an a˜achment plug adapter of the proper configuration for the power outlet, if needed.
- Please check before use, if the output voltage and current of the power supply are suitable for the product.
- Children should be supervised to ensure that they do not play with the appliance. THIS IS NOT ATOY.
- Use this product only for its intended use as described in this manual.
- atomic is not liable for any damage caused to smartphones, iPod®/MP3 player, or any device.
- Never operate this product if it has a damaged cord, plug, cable or housing.
- Only set on dry suˇaces. Do not place on suˇaces wet from water or cleaning solvents.
- CAUTION : Risk of prope˛y damage. Do not expose ba˜eries to sunlight, fire, or other forms of excessive heat.
- CAUTION : Risk of product damage. Do not submerge the wireless speaker.
- CAUTION : Risk of product damage. The wireless speaker and ba˜ery are rated to operate in temperatures up to 140°F (60°C). Do not expose to heat sources or install in any location where the temperature may exceed 140°F (60°C).
FCC Warning
NOTE : This device complies with 15 of the FCC Rules. Operation is subjected to the following two conditions:
- This device may not cause harmful inteˇerence, and
- This device must accept any inteˇerence received, including inteˇerence that may cause undesired operations.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Pa˛ 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inteˇerence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inteˇerence to radio communications. However, there is no guarantee that inteˇerence will occur in a particular installation. If this equipment does cause harmful inteˇerence to radio or television reception, which can be determined by turning the equipment o˝ and on.
Operation is subject to the following two conditions: (1) this device may not cause harmful inteˇerence, and (2) this device must accept any inteˇerence received, including inteˇerence that may cause undesired operation.” The instruction manual shall include, “Warning: Changes or modifications to this unit not expressly approved by the pa˛y responsible for compliance could void the user’s authority to operate the equipment.”
“ NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, according to Pa˛ 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inteˇerence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful inteˇerence to radio communications. However, there is no guarantee that inteˇerence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment ˝ and on, the user is encouraged to try to correct the inteˇerence by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.” Date Code: 06/20
Warning
This product can expose you to chemicals including Lead, which is known to the State of California to cause bi˛h defects or other reproductive harm.
For more information,go to www.P65Warnings.ca.gov.
For questions or concerns, email us at [email protected] Manufactured and marketed by Atomi Inc.
10 West 33rd St., New York, NY 10001 atomi™ is a trademark of Atomi Inc. Designed by Atomi in New York. Made in China. One-year limited warranty from the date of purchase against defects in material and workmanship.