BOSCH PMF 220 CE Corded Multi Cutter Instruction Manual

BOSCH PMF 220 CE Corded Multi Cutter

Product Information

Product Name: PMF 220 CE | PMF 2000 CE
Manufacturer: Robert Bosch Power Tools GmbH
Country of Origin: Germany
Website: www.bosch-pt.com
Model Number: 1 609 92A 83J –
Date of Manual: 04.07.2022
Components: The user manual includes illustrations with numbered components for reference.

Product Usage Instructions

Safety Precautions:  Read all safety instructions, illustrations, and technical data provided with the product to avoid electric shock, fire, and/or serious injuries.

• Keep all safety instructions and user manual for future reference.
• The term “Power Tool” mentioned in the safety instructions refers to both corded and cordless electric tools.
• Maintain a clean and well-lit work area.
• Ensure electrical safety by properly connecting the power tool’s plug.
• If operating the power tool in a damp environment is unavoidable, use a residual current device (RCD) to reduce the risk of electric shock.
• Be alert and pay attention to your actions while using the power tool.
• Only have qualified personnel repair the power tool using original spare parts to ensure its safety.

Product Description:
The product is a multifunctional tool.
Model Options: PMF 220 CE, PMF 2000 CE
Part Number: 3 603 A02 0..

Features:
 Variable speed control (Schwingzahlvorwahl)
Constant electronics (Konstantelektronik)
Soft start (Sanftanlauf)
Power consumption: 220 W
Output power: 130 W
No-load oscillation rate (Leerlaufdrehzahl): n0
Oscillation angle left/right: Oszillationswinkel links/rechts
Weight: 1.1 kg
Protection class: II

 Assembly

Before performing any work on the power tool, unplug it from the socket.

• Pull the plug out of the socket before carrying out any work on the power tool.

Changing the tool

• Wear protective gloves when changing tools. There is a risk of injury when touching the application tools.

Selecting an Application Tool
Please observe the application tools intended for your power tool.

including sawing close to edges, in corners and in difficult- to-reach areas;
example: Shortening skirting boards that are already installed or door frames, plunge cuts when adapting floor panels

Application tool Material Application

| HCS multi blade| Roofing felt, carpets, artificial turf, cardboard, PVC flooring| Fast and precise cutting of soft material and flexible abrasive materials;
example: Cutting carpets, cardboard, PVC flooring, roofing felt, etc.
| Scraper, fixed| Carpets, mortar, concrete, tile adhesive|  Scraping on a hard surface;
example: Removing mortar, tile adhesive, concrete residue and carpet adhesive residue
| Scraper, flexible| Carpet adhesive, paint residue, silicone| Flexible scraping on a soft surface;
example: Removing silicone joints, carpet adhesive residue and paint residue
| Bi-metal segment serrated blade| Insulation material, insulation boards, floor panels, impact sound insulation boards, cardboard, carpets, rubber, leather| Precise cutting of soft materials;
example: Cutting insulation boards to size, cutting protruding insulation material to length so that it is flush with the surface
| TC-Riff sanding finger| Wood, paint| Sanding of wood or paint in hard-to- reach areas without sanding paper;
example: Sanding off paint between window shutter slats, sanding wooden flooring in corners
| TC-Riff plunge cut saw blade| Fibre glass, mortar, wood| Plunge cuts in extremely abrasive materials; example: Routing of thin mosaic tiles
| HCS universal joint cutter| Expansion joints, window putty, insulation materials (rock wool)| Cutting soft materials;
example: Cutting silicone expansion joints or window putty

Fitting/changing the application tool

Remove the application tool if one has already been fitted. To remove the application tool, use the hex key (10) to loosen the clamping bolt (9) and remove the tool. Position the required application tool (e.g. plunge cut saw blade (8)) on the tool holder (6) so that the depressed centre is facing downwards (see figure on the graphics page, text on the application tool should be legible from above). Turn the application tool to a position which is convenient for the job at hand and allow it to lock into place in the cams of the tool holder (6). Twelve positions offset by 30° are possible for this. The built-in magnet (7) holds the application tool in the required position in order to make it easier to mount. Secure the application tool using the clamping bolt (9). Tighten the clamping bolt using the hex key (10) until it is flush with the application tool.

• Check that the application tool is seated securely. Application tools that are attached incorrectly or are not securely fixed in place may come loose during operation, thereby putting you at risk.

Fitting and Adjusting the Depth Stop
The depth stop (13) can be used when working with segment saw blades. Remove the application tool if one has already been fitted. Slide the depth stop (13) over the tool holder (6) and onto the collar of the power tool as far as it will go, with the labelled side facing upwards.
The depth stop is intended for the following cutting depths:

•  With segment saw blades ACZ 85 .. with a diameter of 85 mm: Cutting depths 8 mm, 10 mm, 12 mm and 14 mm (information on the depth stop in a larger font size and without brackets).
• With segment saw blades ACZ 100 .. with a diameter of 100 mm: Cutting depths 14 mm, 16 mm, 18 mm and 20 mm (information on the depth stop in a smaller font size and in brackets).

Insert the appropriate segment saw blade for the desired cutting depth. Slide the depth stop (13) from the tool holder (6) in the direction of the application tool until you can rotate it freely. Rotate the depth stop (13) so that the desired cutting depth is above the section of the saw blade that will be used to saw. Slide the depth stop (13) onto the collar of the power tool once again as far as it will go. Remove the depth stop (13) for all other cutting depths and for working with other application tools. To do this, remove the application tool and pull the depth stop away from the collar.

Fitting the Auxiliary Handle (accessory)
The low-vibration auxiliary handle enables the tool to be used safely and more comfortably.
Screw the auxiliary handle into the thread (5) on the left or right of the machine head depending on how you are working.

• Do not continue to use the power tool if the auxiliary handle is damaged. Do not make any alterations to the auxiliary handle.

Choosing the Sanding Sheet
Different sanding sheets are available, depending on the material you are working with and the required surface removal rate: Attaching/changing the sanding sheet on the sanding plate
The sanding plate (11) is fitted with a hook-and-loop fastening, allowing sanding sheets with a hook-and-loop backing to be secured quickly and easily. Tap the hook-and-loop fastening of the sanding plate (11) before fitting the sanding sheet (12) to facilitate maximum adhesion. Position the sanding sheet (12) so that it is flush with one side of the sanding plate (11), then place the sanding sheet on the sanding plate and press it on firmly. To ensure optimum dust extraction, make sure that the punched holes in the sanding sheet are aligned with the drilled holes in the sanding plate. To remove the sanding sheet (12), take hold of it by an edge and pull it away from the sanding plate (11). You can use all sanding sheets, polishing and cleaning fleeces from the Delta 93 mm series in the Bosch range of accessories. Sanding accessories such as fleece/polishing felt are attached to the sanding plate in the same way.

Dust/Chip Extraction
The dust from materials such as lead paint, some types of wood, minerals and metal can be harmful to human health. Touching or breathing in this dust can trigger allergic reactions and/or cause respiratory illnesses in the user or in people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as carcinogenic, especially in conjunction with wood treatment additives (chromate, wood preservative). Materials containing asbestos may only be machined by specialists.

• Use a dust extraction system that is suitable for the material wherever possible.
• Provide good ventilation at the workplace.
• It is advisable to wear a P2 filter class breathing mask. The regulations on the material being machined that apply in the country of use must be observed.
• Avoid dust accumulation at the workplace. Dust can easily ignite.

Connecting the dust extraction system The dust extraction system (17) is only designed for use with the sanding plate (11); it serves no purpose when used together with other application tools. Always connect a dust extraction system for sanding. Remove the application tool and the depth stop (13) for fitting the dust extraction system (17) (accessory). Slide the dust extraction system (17) as far as it will go over the tool holder (6) onto the collar of the power tool. Turn the dust extraction system to the required position (not directly under the power tool). Push the clamping lever (15) shut to fix the dust extraction system in position. Plug the tool sleeve of the extraction hose (18) onto the extraction outlet (16). Connect the dust extraction hose (18) to a dust extractor (accessory). You will find an overview of how to connect various dust extractors at the end of these operating instructions. The dust extractor must be suitable for the material being worked. When extracting dry dust that is especially detrimental to health or carcinogenic, use a special dust extractor.

Tool Change:
Depending on the model (PMF 220 CE or PMF 2000 CE), the user manual provides a list of different tools and their suitable applications.
The tools mentioned include:
Bi-metal segment tool: Suitable for wood-based materials, plastics, and non- ferrous metals.
Delta 93 mm: Used for sanding wood, paint, varnish, stone, etc. – Profile sander: Suitable for metal and wood-based materials, soft plastics.
HCS multi-knife: Used for cutting artificial turf, cardboard, PVC flooring, flexible abrasive materials, etc. – Rigid scraper: Suitable for removing adhesive-bonded plates, non-hardened materials.
Note: The above information is based on the provided text extract from the user manual. For detailed and accurate instructions, refer to the complete user manual provided with the product.

Safety Instructions

General Power Tool Safety Warnings
WARNING Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cord-less) power tool.

Work area safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is un-avoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
•  If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
•  Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools and accessories. Check for mis-alignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
•  Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety information for multifunction tools

• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the workpiece by hand or against your body leaves it unstable and may lead to loss of control.
• Only use the power tool for dry sanding. Water entering a power tool will increase the risk of electric shock.
• Warning: Danger of fire! Avoid overheating the work-piece and the sander. Always empty the dust collector before taking a break from work. Sanding dust in the dust bag, microfilter, paper bag (or in the filter bag or vacuum cleaner filter) can spontaneously combust under certain conditions, for example if flying sparks are created when sanding metals. This risk is increased if the sanding dust is mixed with paint or polyurethane residue or with other chemical substances and if the workpiece is hot as a result of prolonged work.
•  Keep hands away from the sawing area. Do not reach under the workpiece. Contact with the saw blade can lead to injuries.
• Clean the air vents on your power tool regularly. The motor’s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.
• Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes property damage or may cause an electric shock.
• Hold the power tool firmly with both hands and make sure you have a stable footing. The power tool can be more securely guided with both hands.
• When changing the application tool, wear protective gloves.bApplication tools can become hot when used for prolonged periods of time.
• Do not scrape any dampened materials (e.g. wallpaper) or on damp surfaces. Water entering a power tool increases the risk of electric shock.
• Do not treat the surface you will be working on with any fluids that contain solvents. Poisonous vapours may develop due to the materials heating up when being scraped.
• Take particular care when handling scrapers and blades. The application tools are very sharp. Danger of injury.

Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorized customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

• Keep the magnet away from implants and other medical devices, e.g. pacemakers or insulin pumps. The magnet generates a field that can impair the function of implants and medical devices.
• Keep the power tool away from magnetic data carriers and magnetically sensitive equipment. The effect of the magnet can lead to irreversible data loss.

Product Description and Specifications
Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury.
Please observe the illustrations at the beginning of this operating manual.

Intended Use
The power tool is intended for sawing and cutting wood-based materials, plastic, plasterboard, non-ferrous metals and mounting elements (e.g. nails, clamps). It is also suitable for working on soft wall tiles and for dry sanding and scraping of small areas. It is ideal for working close to edges and flush with surfaces.

Product Features
The numbering of the product features refers to the diagram of the power tool on the graphics page.

1.  On/off switch
2. Orbital stroke rate preselection thumbwheel
3. Ventilation slots
4. Handle (insulated gripping surface)
5.  Thread for auxiliary handle
6.  Tool holder
7. Magnet
8.  Plunge cut saw blade
9. Clamping bolt
10. Hex key
11. Sanding plate
12. Sanding sheet
13.  Depth stop
14.  Segment saw blade
15. Clamping lever for dust extraction system
16. Dust extraction outlet
17. Dust extraction system

• * Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical Data The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑4.
Typically, the A-weighted noise level of the power tool is: 84 dB(A); sound power level 95 dB(A). Uncertainty K=3 dB.

Wear hearing protection
Working without the Auxiliary Handle
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841‑2‑4 (Sanding),
EN 62841‑2‑11 (Cutting):
Sanding: ah=10 m/s2, K=1.5 m/s2,
Cutting with plunge cut saw blade: ah=16 m/s2, K=2 m/s2,
Cutting with segmential saw blade: ah=14 m/s2, K=3 m/s2,

Working with the auxiliary handle
Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841‑2‑4 (Sanding),
EN 62841‑2‑11 (Cutting):
Sanding: ah=9 m/s2, K=1.5 m/s2,
The following table shows examples of application tools. You can find additional application tools in Bosch’s extensive range of accessories.
Scraping: ah=12 m/s2, K=1.5 m/s2.
Cutting with plunge cut saw blade: ah=17 m/s2, K=2 m/s2,
Cutting with segmential saw blade: ah=18.5 m/s2, K=3 m/s2,
Scraping: ah=16 m/s2, K=1.5 m/s2.
The vibration level and noise emission value given in these instructions have been measured in accordance with a standardized measuring procedure and may be used to compare power tools. They may also be used for a preliminary estimation of vibration and noise emissions. The stated vibration level and noise emission value represent the main applications of the power tool. However, if the power tool is used for other applications, with different application tools or is poorly maintained, the vibration level and noise emission value may differ. This may significantly increase the vibration and noise emissions over the total working period. To estimate vibration and noise emissions accurately, the times when the tool is switched off or when it is running but not actually being used should also be taken into account. This may significantly reduce vibration and noise emissions over the total working period. Implement additional safety measures to protect the operator from the effects of vibration, such as servicing the power tool and application tools, keeping their hands warm, and organizing workflows correctly.

Operation

Starting Operation

• Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the power tool.
• Products that are only sold in AUS and NZ: Use a residual current device (RCD) with a nominal residual current of 30 mA or less.

Switching On/Off

• Make sure that you are able to press the On/Off switch without releasing the handle.

To switch on the power tool, slide the on/off switch (1) forward so that “I” appears on the switch. The electronic soft start limits the torque when the power tool is switched on and increases the service life of the motor. The Constant Electronic keeps the orbital stroke rate at no load and under load virtually consistent, guaranteeing uniform performance. To switch off the power tool, slide the on/off switch (1) backwards so that “0” appears on the switch.

Preselecting the orbital stroke rate
You can even preselect the required orbital stroke rate during operation using the orbital stroke rate preselection thumbwheel (2). The required orbital stroke rate is dependent on the material and the work conditions and can be determined using practical tests. Orbital stroke rate level “6” is recommended for sawing, cutting and sanding harder materials, such as wood or metal; orbital stroke rate level “4” is recommended for softer materials, such as plastic.

Working Advice

•  Pull the plug out of the socket before carrying out any work on the power tool.
• Always wait until the power tool has come to a complete stop before placing it down.

Note: Do not keep the ventilation slots (3) on the power tool closed when working as this will reduce the service life of the power tool.

Operating principle
The oscillating drive causes the application tool to oscillate back and forth by 2.8° up to 20000 times per minute. This enables precise work in the tightest of spaces.
Use a consistent, low contact pressure when performing work; otherwise, the performance will be impaired and the application tool may jam.
While working, move the power tool back and forth to prevent the application tool overheating and jamming.

Sawing

• Use only undamaged saw blades that are in perfect condition. Bent or dull saw blades can break, negatively influence the cut, or lead to kickback.
• When sawing lightweight materials, take into account the statutory provisions and recommendations of the material manufacturers.
• Plunge cuts may only be applied to soft materials, such as wood, gypsum board, etc.

Before using HCS saw blades to saw into wood, chipboard, building materials, etc., check these saw blades for foreign objects, such as nails, screws, etc. Remove the foreign objects as required or use bi-metal saw blades.

Cutting
Note: When cutting wall tiles, please bear in mind that the application tools are subject to high wear if used for extended periods.

Sanding
The material removal rate and sanding result are primarily determined by the choice of sanding sheet, the preselected orbital stroke rate level and the contact pressure. Only immaculate sanding sheets achieve good sanding performance and make the power tool last longer. Be sure to apply consistent contact pressure in order to in-crease the lifetime of the sanding sheets. Excessively increasing the contact pressure will not lead to increased sanding performance, rather it will cause more severe wear of the power tool and of the sanding sheet. To sand corners, edges and hard-to-reach areas accurately, you can also work with the tips alone or with an edge of the sanding plate. The sanding sheet may heat up significantly when used to sand specific points rather than entire surfaces. Reduce the orbital stroke rate and contact pressure and allow the sanding sheet to cool down at regular intervals. Do not use a sanding sheet for other materials after it has been used to work on metal. Use only original Bosch-sanding accessories. Always connect a dust extraction system for sanding.

Scraping
Select a high orbital stroke rate level for scraping. Work on a soft surface (e.g. wood) at a flat angle and with low contact pressure. Failure to do so may cause the scraper to cut into the surface underneath.

Maintenance and Service

Maintenance and Cleaning

• Pull the plug out of the socket before carrying out any work on the power tool.
• To ensure safe and efficient operation, always keep the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bosch or by an after-sales service centre that is authorized to repair Bosch power tools. Regularly clean Riff application tools (accessories) using a wire brush.

After-Sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com The Bosch product use advice team will be happy to help you with any questions about our products and their accessories. In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at: www.bosch- pt.com/serviceaddresses

Disposal
The power tool, accessories and packaging should be re-cycled in an environmentally friendly manner.
Do not dispose of power tools along with household waste.

Only for EU countries:
According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its implementation into national law, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.
If disposed incorrectly, waste electrical and electronic equipment may have harmful effects on the environment and human health, due to the potential presence of hazardous substances.

Only for United Kingdom:
According to The Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended), products that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. EU Declaration of Conformity
Multifunction tool Article number
We declare under our sole responsibility that the stated products comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards.
Technical file at: *

Declaration of Conformity

Multifunction tool                  Article number
PMF 220 CE                          3 603 A02 070
PMF 2000 CE
We declare under our sole responsibility that the stated products comply with all applicable provisions of the regulations listed below and are in conformity with the following standards.
Technical file at: Robert Bosch Ltd. (PT/SOP-GB), Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ, United Kingdom
The Supply of Machinery (Safety) Regulations 2008
The Electromagnetic Compatibility Regulations 2016
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
EN 62841-1:2015
EN 62841-2-4:2014
EN 55014-1:2017+A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN IEC 63000:2018
Robert Bosch Power Tools GmbH, 70538 Stuttgart, Germany represented (in terms of the above regulations) by Robert Bosch Limited, Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ, United Kingdom
Martin Sibley
Head of Sales Operations and Aftersales
Robert Bosch Ltd. Broadwater Park, North Orbital Road, Uxbridge UB9 5HJ, United Kingdom, as authorized representative acting on behalf of Robert Bosch Power Tools GmbH, 70538 Stuttgart, Germany

References

• Invented for life | Bosch Global
• Skånevik Ølen Kraftlag AS
• Bosch Power Tools | Bosch Power Tools
• Location selection | Bosch Power Tools
• Service worldwide
• Bosch Elektrowerkzeuge und Zubehör | Bosch Elektrowerkzeuge
• Bosch el-værktøj | Bosch el-værktøj
• Bosch-sähkötyökalut | Bosch-sähkötyökalut
• Outillage électroportatif Bosch | Outillage électroportatif Bosch
• Home | Bosch Power Tools
• Invented for life | Bosch Global
• Ana Sayfa | Bosch Türkiye
• herramientasbosch.net

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>