hansgrohe 71560XXX Vernis Shape 70 Single Lever Basin Mixer Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
71560XXX Vernis Shape
70 Single Lever Basin Mixer Vernis Shape 70
71560XXX / 71566000 / 71567XXX /
71596000
Vernis Shape 70 CoolStart
71593XXX
Vernis Shape 100
71561XXX / 71568000 / 71569XXX /
71597000
Vernis Shape 100 CoolStart
71594XXX Vernis Shape
71211XXX / 71219XXX
**** Safety Notes
Gloves should be worn during installation to prevent crushing and
cutting injuries.
The product may only be used for bathing,hygienic and body cleaning
purposes.
**** The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushedand tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It isnot allowed to attach other objects to the drain valve, for example a semi-pedestal.
- If the instantaneous water heater causes problems or if you wish to increase the water flow, the EcoSmart ® (flowlimiter) located behind the aerator can be removed.
Technical Data
This mixer series-produced with EcoSmart® (flow limiter)
| Operating pressure: | max. 1 MPa |
|---|---|
| Recommended operating pressure: | 0,1 – 0,5 MPa |
| Test pressure: | 1,6 MPa (1 MPa = 10 bar = 147 PSI) |
| Hot water temperature: | max. 60°C |
| Thermal disinfection: | 70°C / 4 min |
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment
To adjust the hot water limiter. Using a hot water limiter in combination with
a continuous flow water heater is not recommended.
Dimensions
Flow diagram
Spare parts
XXX = Colors
000 = Chrome Plated
670 = Matt Black
Special accessories (order as an extra)
- special tool #58085000
- Installation putty
Cleaning
Operation
- Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
- After periods of prolonged non-use, but at least every third day, the fittings must be opened with the handle in hot and cold position to prevent stagnation in the connecting lines. Let the water run until the water temperature is constant.
Test certificate
Assembly
| 
---|---
| 
http://www.hansgrohe.com
/cleaning-recommendation
Cleaning recommendation
http://www.hansgrohe.com/cleaning-recommendation
Warranty
http://www.hansgrohe.com/cleaning-recommendation
Contact
http://www.hansgrohe.com/cleaning-recommendation
| 
---|---
|
Vernis Shape 70
71560XXX / 71566000 / 71567XXX /
71596000
Vernis Shape
71211XXX / 71219XXX
Vernis Shape 100
71561XXX / 71568000 / 71569XXX /
71597000 open close cold hot 
Vernis Shape 70 CoolStart
71593XXX
Vernis Shape 100 CoolStart
71594XXX
open close cold hot
P-IX
DVGW
SINTEF
NF GODKENDT TIL DRIKKEVAND
| 71560XXX | PA-IX 29967/IO | DM0446 | X |
|---|---|---|---|
| 71561XXX | PA-IX 38003/IO | DM0446 | X |
| 71566000 | PA-IX 38007/IO | DM0446 | X |
| 71567XXX | PA-IX 38007/IO | DM0446 | X |
| 71568000 | PA-IX 38008/IO | DM0446 | X |
| 71569XXX | PA-IX 38008/IO | DM0446 | X |
| 71593XXX | PA-IX 38133/IO | DM0446 | X |
| 71594000 | PA-IX 38134/IO | DM0446 | X |
| 71596000 | PA-IX 29967/IO | X | |
| 71597000 | X | ||
| 71211XXX | PA-IX 38143/IO | X X | |
| 71219XXX |
Hansgrohe
Auestraße 5 – 9 · D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com
02/2022
9.07266.01 R01
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>